Floating solar

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Floating solar or floating photovoltaics (FPV), sometimes called floatovoltaics, are solar panels mounted on a structure that floats. The structures that hold the panels usually consist of plastic buoys and cables. They are then placed on a body of water (e.g., Reservoirs, quarry lakes, irrigation canals or remediation and tailing ponds). The systems can have advantages over photovoltaics (PV) on land.

Water surfaces may be less expensive than the cost of land, and there are fewer rules and regulations for structures built on bodies of water not used for recreation. Life cycle analysis indicates that foam-based FPV have some of the shortest energy payback times (1.3 years) and the lowest greenhouse gas emissions to energy ratio (11 kg CO 2 eq/MWh) in crystalline silicon solar photovoltaic technologies reported.

FPV can be used to generate electricity for any application as well as to make green hydrogen via electrolysis on the same water they are floating on. Floating arrays can achieve higher efficiencies than PV panels on land because water cools the panels. The panels can have a special coating to prevent rust or corrosion. Floating SPV also provide shade, slow evaporation and inhibit the growth of algae. The market for this renewable energy technology has grown rapidly since 2016.

The first 20 plants with capacities of a few dozen kWp were built between 2007 and 2013.…

Floating solar or floating photovoltaics (FPV), sometimes called floatovoltaics, are solar panels mounted on a structure that floats. The structures that hold the panels usually consist of plastic buoys and cables. They are then placed on a body of water (e.g., Reservoirs, quarry lakes, irrigation canals or remediation and tailing ponds). The systems can have advantages over photovoltaics (PV) on land.

Water surfaces may be less expensive than the cost of land, and there are fewer rules and regulations for structures built on bodies of water not used for recreation. Life cycle analysis indicates that foam-based FPV have some of the shortest energy payback times (1.3 years) and the lowest greenhouse gas emissions to energy ratio (11 kg CO 2 eq/MWh) in crystalline silicon solar photovoltaic technologies reported.

FPV can be used to generate electricity for any application as well as to make green hydrogen via electrolysis on the same water they are floating on. Floating arrays can achieve higher efficiencies than PV panels on land because water cools the panels. The panels can have a special coating to prevent rust or corrosion. Floating SPV also provide shade, slow evaporation and inhibit the growth of algae. The market for this renewable energy technology has grown rapidly since 2016.

The first 20 plants with capacities of a few dozen kWp were built between 2007 and 2013. Installed power grew from 3 GW in 2020, to 13 GW in 2022, surpassing a prediction of 10 GW by 2025. The World Bank estimated there are 6,600 large bodies of water suitable for floating solar, with a technical capacity of over 4,000 GW if 10% of their surfaces were covered with panels. The US has more floating solar potential than any other country in the world.

Bodies of water suitable for floating solar are well-distributed throughout the US The southeast and southern US plains states generally have reservoirs with the largest capacities.

Gallery

Further reading

Howard, E. and Schmidt, E. 2008. Evaporation control using Rio Tinto's Floating Modules on Northparks Mine, Landloch and NCEA. National Centre for Engineering in Agriculture Publication 1001858/1, US Q, Toowoomba.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1377405297 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

30 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.