Flooring
≈ 9 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Flooring is the general term for a permanent covering of a floor, or for the work of installing such a floor covering. Floor covering is a term to generically describe any finish material applied over a floor structure to provide a walking surface. Both terms are used interchangeably but floor covering refers more to loose-laid materials. Materials almost always classified as flooring include carpet, laminate, tile, and vinyl .
Flooring is the general term for a permanent covering of a floor, or for the work of installing such a floor covering. Floor covering is a term to generically describe any finish material applied over a floor structure to provide a walking surface. Both terms are used interchangeably but floor covering refers more to loose-laid materials. Materials almost always classified as flooring include carpet, laminate, tile, and vinyl .
Subfloor
The floor under the flooring is called the subfloor, which provides the support for the flooring. Special purpose subfloors like floating floors, raised floors or sprung floors may be laid upon another underlying subfloor which provides the structural strength. Subfloors that are below grade (underground) or ground level floors in buildings without basements typically have a concrete subfloor. Subfloors above grade (above ground) typically have a plywood subfloor.
Flooring materials
The choice of materials for floor covering is affected by factors such as cost, endurance, noise insulation, comfort, and cleaning effort. Some types of flooring must not be installed below grade, including laminate and hardwood due to potential damage from moisture. The sub-floor may be finished in a way that makes it usable without any extra work, see: Earthen floor adobe or clay floors Solid ground floor, cementitious levelling/wearing/granolithic screeds, polymer-modified concretes and levelling/wearing screeds.
Carpeting
Carpet is a soft floor covering made of bound carpet fibers or stapled fibers. Carpeting refers to wall-to-wall coverage, whereas a rug is simply used to cover a space. This type of flooring is typically used indoors and can be used in both high and low-traffic areas. It typically lasts for 15–18 years before it needs to be replaced. The quality of a carpet is usually measured in face weight, or how many fibers there are per square inch. The higher the face weight the more plush a carpet will feel. Carpets come in a variety of materials including wool, nylon, olefin, and polyester. There are different types of carpet like twists, which is commonly referred to as berber. Twist carpeting is composed of multiple twisted fibers set into the carpet backing. It is typically used in low-traffic areas. Another type of carpeting is looped carpets, which are composed of looped fibers set into the carpet backing. This type of carpeting is typically used in high-traffic areas as it is easy to clean. There are four common widths for carpeting goods: 6' wide, 12' wide, 13'6" wide, and 15' wide.
Wood flooring
Many different species of wood are fabricated into wood flooring in two primary forms: plank and parquet. Hardwoods are typically much more durable than softwoods. Reclaimed lumber has a unique appearance and is used in green (environmentally responsible) building. The thermal conductivity of the hardwood flooring is less as compared to laminate wood flooring. Engineered hardwood has a thin solid wood layer on top with a composite core, which is generally plywood, but can be high density fiberboard, stone polymer composite, or strips of a solid wood such as spruce or birch. The composite core increases the dimensional stability of the planks, which expand and contract less than those of solid wood flooring. As a result, engineered wood planks can be significantly larger than solid wood planks while retaining structural integrity. The thickness of the wood layer atop the core determines its ability to be sanded and refinished; engineered wood floors can generally be sanded and refinished 1-2 times, though some cannot be refinished while others can be refinished as many times as a solid wood floor. Bamboo flooring is a floor manufactured from the bamboo plant and is a type of hardwood flooring, though technically not a wood. Bamboo is known to be durable and environmentally friendly. It is available in many different patterns, colors, and textures. There are three types of bamboo flooring construction: horizontal cut, vertical cut, and strand woven. Strand woven is the hardest and most durable of the three types. Cork flooring is a flooring material manufactured from the by-product of the cork oak tree. Cork floors are considered to be eco-friendly since the cork oak tree bark is stripped every nine to ten years and doesn't damage the tree. Cork flooring comes in both tiles and planks, and can have glue or glues-less installation. Hardwood durability and hardness are determined by a ranking system called the Janka scale. The Janka scale is the force that it takes to embed a steel ball into the hardwood. The more force it takes to do so, the harder the wood. Hardwood floors can either be purchased as pre-finished planks or as planks that need to be sanded and finished in the home following installation. Manufacturers of pre-finished hardwood floors use varying materials for the finish, which usually include layers of polyurethane and aluminum oxide. The hardness of aluminum oxide can make these floors particularly difficult and costly to refinish, to the extent that most engineered wood floors do not get refinished, even if they can be. Hardwood floors can be repaired by spot-sanding and refinishing, plank replacement, or a refinish of the full floor.
Resilient flooring
Unlike ceramic and stone tiles, which are made of minerals, resilient flooring is made of materials that have some elasticity, giving the flooring a degree of flexibility called resilience. Performance surfaces used for dance or athletics are usually made of wood or resilient flooring. Resilient flooring includes many different manufactured products including linoleum, sheet vinyl, vinyl composition tile (VCT) , cork (sheet or tile), and rubber. Vinyl flooring is available in large sheets or pre-cut tiles; the former is resilient. Some come with a pre-applied adhesive for peel-and-stick installation, others require adhesive to be spread onto the substrate. The two basic categories of vinyl floor tiles are solid vinyl (products with vinyl or binder content higher than 34%) and vinyl composition (products with a vinyl or binder content lower than 34%), and the three basic categories of vinyl sheet flooring are homogeneous, inlaid, and layered composite. These types of vinyl flooring differ in manufacturing process and content, ranging in vinyl (polyvinyl chloride) content from 11% to 55%. Resilient flooring products, such as PVC and polypropylene are becoming more popular in specialty applications such as trailer flooring and garage flooring. New applications have also emerged for marine flooring. There are important factors to consider in specialty applications, that may not be present in a typical application. For example, certain tires will leave marks on PVC flooring but those marks will be less prevalent on polypropylene products. Adhesives also change based on application.
Seamless polymer flooring
Many different seamless flooring materials are available that vary from air-drying latex emulsion polymers to reactive thermoset resins such as waterborne, solvents or solvent-free urethanes, polyaspartics, and epoxies. Applied in liquid form, when allowed to dry and/or cure to provide a completely seamless floor covering. They find use in situations ranging from the simple protection of domestic garage floors to the restoration and protection of commercial and industrial flooring. They are also used to solve a vast array of problems in industry such as wet areas in laboratories or food processing plants where spillages of oils and fats tend to be easily absorbed and/or difficult to clean. Other reasons for covering concrete with synthetic resin flooring are to improve resistance to chemicals, enhancing resistance to impact and wear, and for aesthetic appearance purposes. Seamless polymer flooring can take many forms: Floor seals applied at less than 6 mil (0.15 mm) Floor coatings applied at 6 - 12 mil (0.15 – 0.3 mm) High-build floor coatings applied at 6 - 40 mil (0.15 – 1 mm) Broadcast flooring with embedded aggregate applied in excess of 80 mil (2 mm) Flow applied (self-smoothing/self-leveling flooring) applied at 80 – 120 mil (2 – 3 mm) Trowel finished bound resin screed flooring applied in excess of 160 mil (4 mm) Heavy-duty flow applied to floor applied at 160 – 240 mil (4 – 6 mm) Heavy-duty trowel finished resin screed flooring applied in excess of 240mil (6 mm) They typically have granular or rubberized particles added to give better traction/slip resistance on walkways and steps especially in areas subject to frequent washing, and for better traction/skid resistance in traffic aisles.
Sustainable flooring
Sustainable flooring is produced from more sustainable materials (and by more sustainable processes) that reduces demands on ecosystems during its life-cycle.
Features
There are a number of special features that may be used to ornament a floor or perform a useful service: Floor medallions decorative centerpieces of a floor design. Doormats to help keep a floor clean. Gratings used to drain water or to rub dirt off shoes. Tactile or rumble strips to warn of for instance a wheelchair ramp, these would normally also be distinctively colored or patterned. Light strips to show an escape route out, especially on airplanes. Moldings or baseboards to decorate the sides of a floor or to cover the edge of a floating floor. Anti-slip mats: The addition of either granular or rubberized particles that will allow wheels, shoes, or feet better traction.
See also
Floor cleaning
Text derived from https://en.wikipedia.org/w/index.php?oldid=1369830244 under CC BY-SA 4.0; modifications have been made.