Lesson plan
Flue
A flue is a pipe, or opening in a chimney for conveying exhaust gases from a fireplace, furnace, water heater, boiler, or generator to the outdoors. Historically the term flue meant the chimney itself. In the United States, they are also known as vents for boilers and as breeching for water heaters and modern furnaces. They usually operate by buoyancy, also known as the stack effect, or the combustion products may be "induced" via a blower. As combustion products contain carbon monoxide and other dangerous compounds, proper "draft", and admission of replacement air is imperative. Building codes, and other standards, regulate their materials, design, and installation. A flue is the passage within a chimney or within an appliance (appliance flue) that conveys products of combustion to the outdoor atmosphere. In U.S. model codes, the regulated venting system is the continuous open passageway from the appliance’s flue collar or draft hood to outdoors, typically consisting of a vent or chimney and any vent connector; HVAC ductwork is not part of, and may not be used as, a venting system. Appliances generally discharge combustion products to the outdoors; venting may occur by natural draft (buoyancy) or by mechanical draft (fan-assisted), and direct-vent appliances are sealed-combustion units that take all combustion air from outdoors and discharge outdoors.…
Article summary
A flue is a pipe, or opening in a chimney for conveying exhaust gases from a fireplace, furnace, water heater, boiler, or generator to the outdoors. Historically the term flue meant the chimney itself. In the United States, they are also known as vents for boilers and as breeching for water heaters and modern furnaces. They usually operate by buoyancy, also known as the stack effect, or the combustion products may be "induced" via a blower. As combustion products contain carbon monoxide and other dangerous compounds, proper "draft", and admission of replacement air is imperative. Building codes, and other standards, regulate their materials, design, and installation. A flue is the passage within a chimney or within an appliance (appliance flue) that conveys products of combustion to the outdoor atmosphere. In U.S. model codes, the regulated venting system is the continuous open passageway from the appliance’s flue collar or draft hood to outdoors, typically consisting of a vent or chimney and any vent connector; HVAC ductwork is not part of, and may not be used as, a venting system. Appliances generally discharge combustion products to the outdoors; venting may occur by natural draft (buoyancy) or by mechanical draft (fan-assisted), and direct-vent appliances are sealed-combustion units that take all combustion air from outdoors and discharge outdoors.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.