Fluidic force microscopy

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Fluidic force microscopy (FluidFM) is a type of scanning probe microscopy, and is typically used on a standard inverted light microscope. The unique characteristic of FluidFM is that it introduces microscopic channels into AFM probes. Those channels can have an aperture of less than 300 nm, or 500 times thinner than a human hair.

This nanometric features enables the handling of liquid volumes at the femtoliter (fL) scale as well as force controlled manipulations of sub-micron objects. Via the nanofluidic channels, substances can for example be inserted into single cells or cells can be isolated from a confluent layer.

Fluidic force microscopy (FluidFM) is a type of scanning probe microscopy, and is typically used on a standard inverted light microscope. The unique characteristic of FluidFM is that it introduces microscopic channels into AFM probes. Those channels can have an aperture of less than 300 nm, or 500 times thinner than a human hair.

This nanometric features enables the handling of liquid volumes at the femtoliter (fL) scale as well as force controlled manipulations of sub-micron objects. Via the nanofluidic channels, substances can for example be inserted into single cells or cells can be isolated from a confluent layer.

Technology

Special micropipettes and nanopipettes are used as FluidFM probes with openings between 300 nm and 8 μm. A larger diameter is helpful for single cell adhesion experiments, whereas a smaller diameter provides good opportunities for nanolithography and handling of sub-micron objects. Compared to the traditional glass micropipettes FluidFM probes are much more gentle to soft samples such as cells.

They can be controlled with pN and nm precision, and handle volumes more precise and consistent due to their wafer-based fabrication process. FluidFM has unique advantages for single cell applications and beyond. To control volumes in the fL range FluidFM relies on pressure control.

Either overpressure or vacuum is used, depending on the application. Typical operating pressures are in the range of a few hPa. The FluidFM technology is typically used on top of an inverted microscope.

In addition to standard AFM experiments, FluidFM provides the possibility to perform countless other applications, such as single cell injection and adhesion as well as nanolithography and spotting.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1320013758 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001320013758 · captured 1762059190.0 · version history

Cite this page as: encyclopegia.org, “Fluidic force microscopy”, snapshot enwiki-001320013758. https://encyclopegia.org/a/fluidic-force-microscopy

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.