Fluidized bed concentrator

.

Uses your system voice; voice and rate in settings.

≈ 3 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A fluidized bed concentrator (FBC) is an industrial process for the treatment of exhaust air. The system uses a bed of activated carbon beads to adsorb volatile organic compounds (VOCs) from the exhaust gas.

Differently from the fixed-bed or carbon rotor concentrators, the FBC system forces the VOC-laden air through several perforated steel trays, increasing the velocity of the air and allowing the sub-millimeter carbon beads to fluidize, or behave as if suspended in a liquid. This increases the surface area of the carbon-gas interaction, making it more effective at capturing VOCs.

Components

The fluidized bed concentrator consists of five primary components: Adsorption tower Desorption tower Thermal oxidizer Carbon transport system Process fans: inlet adsorber, inlet desorber, outlet oxidizer to stack

How it works

Industrial processes requiring ventilation, including paint booths, printing, and chemical production, exhaust the ventilated air to the fluidized bed concentrator at room temperature. The air first passes into the adsorption tower, where it moves through six perforated trays of clean carbon beads.

The 0.7 mm bead activated carbon (BAC) fluidizes in the trays and captures the VOCs as they intermix. The saturated carbon beads are passed from the adsorber tower to the desorber tower, where the beads are heated to 350 °F and the VOCs are released.

Typically the adsorber tower is many times larger than the desorber tower, leading to an air volume reduction and an increase in VOC concentration. The ratio of adsorber size to desorber size is called the concentration ratio, and ranges from 10:1 to 100:1.

The concentrated VOC gas stream is sent from the desorb tower to a thermal oxidizer, where the organic compounds are heated to 1400 °F and oxidized, or broken down into carbon dioxide (CO 2 ), water (H 2 O), and by-products. In some cases, small amounts of carbon monoxide (CO), nitrogen oxide (NO X ), and other gases are produced.

Emissions and energy usage

The primary advantage of the FBC over traditional rotor concentrators lies in its ability to achieve any concentration ratio up to the lower explosive limit (LEL). This allows Honda Alabama's paint shop to switch from oxidizing 100,000 CFM of VOCs in a regenerative thermal oxidizer (RTO), to oxidizing only 1,500 CFM of VOCs in a small thermal oxidizer, at a much higher concentration.

Reducing the volume of air to be oxidized from 100,000 CFM to 1,500 CFM (66:1 concentration ratio), allows for a much lower energy usage and consequently, fewer CO 2 and NO X emissions.

Industries served

Paint finishing Automotive Aerospace Heavy machinery Transportation Printing Chemical production Semiconductor Food processing

See also

Volatile organic compound National Emissions Standards for Hazardous Air Pollutants Air pollution in the United States Activated carbon Air pollution

plus further links to relevant rules, reports, and programs. Organic NESHAP

Text derived from https://en.wikipedia.org/w/index.php?oldid=1372764935 under CC BY-SA 4.0; modifications have been made.

Words in each sectionHow it worksHow it worksHow it works: 191 words191Emissions and energy us…Emissions and energy usageEmissions and energy usage: 103 words103ComponentsComponentsComponents: 28 words28See alsoSee alsoSee also: 20 words20Industries servedIndustries servedIndustries served: 13 words13
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001372764935 · captured 2026-09-02 · ledger · version history

Cite this page as: encyclopegia.org, “Fluidized bed concentrator”, snapshot enwiki-001372764935. https://encyclopegia.org/a/fluidized-bed-concentrator

Sources cited in this revision

5 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.