Flux
≈ 9 min read
Names in other languages
- Españolflujo
- Englishflux
- Françaisflux
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Flux describes any effect that appears to pass or travel (whether it actually moves or not) through a surface or substance. Flux is a concept in applied mathematics and vector calculus which has many applications in physics. For transport phenomena, flux is a vector quantity, describing the magnitude and direction of the flow of a substance or property. In vector calculus, flux is a scalar quantity, defined as the surface integral of the perpendicular component of a vector field over a surface.
Flux describes any effect that appears to pass or travel (whether it actually moves or not) through a surface or substance. Flux is a concept in applied mathematics and vector calculus which has many applications in physics. For transport phenomena, flux is a vector quantity, describing the magnitude and direction of the flow of a substance or property. In vector calculus, flux is a scalar quantity, defined as the surface integral of the perpendicular component of a vector field over a surface. j = \frac{I}{A}, where I = \lim_{\Delta t \to 0}\frac{\Delta q}{\Delta t} = \frac{\mathrm{d}q}{\mathrm{d}t}. In this case the surface in which flux is being measured is fixed and has area A. The surface is assumed to be flat, and the flow is assumed to be everywhere constant with respect to position and perpendicular to the surface. Second, flux as a scalar field defined along a surface, i.e. a function of points on the surface: j(\mathbf{p}) = \frac{\partial I}{\partial A}(\mathbf{p}), I(A,\mathbf{p}) = \frac{\mathrm{d}q}{\mathrm{d}t}(A, \mathbf{p}). As before, the surface is assumed to be flat, and the flow is assumed to be everywhere perpendicular to it. However the flow need not be constant. q is now a function of p, a point on the surface, and A, an area. Rather than measure the total flow through the surface, q measures the flow through the disk with area A centered at p along the surface. Finally, flux as a vector field: \mathbf{j}(\mathbf{p}) = \frac{\partial \mathbf{I}}{\partial A}(\mathbf{p}), \mathbf{I}(A,\mathbf{p}) = \underset{\mathbf{\hat{n}}}{\operatorname{arg\,max}}\; \mathbf{\hat{n}}_{\mathbf p} \frac{\mathrm{d}q}{\mathrm{d}t}(A,\mathbf{p}, \mathbf{\hat{n}}). In this case, there is no fixed surface we are measuring over. q is a function of a point, an area, and a direction (given by a unit vector \mathbf{\hat{n}} ), and measures the flow through the disk of area A perpendicular to that unit vector. I is defined picking the unit vector that maximizes the flow around the point, because the true flow is maximized across the disk that is perpendicular to it. The unit vector thus uniquely maximizes the function when it points in the "true direction" of the flow. (Strictly speaking, this is an abuse of notation because the "arg max" cannot directly compare vectors; we take the vector with the biggest norm instead.) \mathbf{j} \cdot \mathbf{\hat{n}} = j\cos\theta. That is, the component of flux passing through the surface (i.e. normal to it) is j cos θ, while the component of flux passing tangential to the area is j sin θ, but there is no flux actually passing through the area in the tangential direction. The only component of flux passing normal to the area is the cosine component. For vector flux, the surface integral of j over a surface S, gives the proper flowing per unit of time through the surface: \frac{\mathrm{d}q}{\mathrm{d}t} = \iint_S \mathbf{j} \cdot \mathbf{\hat{n}}\, dA = \iint_S \mathbf{j} \cdot d\mathbf{A}, where A (and its infinitesimal) is the vector area combination \mathbf{A} = A \mathbf{\hat{n}} of the magnitude of the area A through which the property passes and a unit vector \mathbf{\hat{n}} normal to the area. Unlike in the second set of equations, the surface here need not be flat. Finally, we can integrate again over the time duration t 1 to t 2 , getting the total amount of the property flowing through the surface in that time (t 2 − t 1 ): q = \int_{t_1}^{t_2}\iint_S \mathbf{j}\cdot d\mathbf A\, dt. \mathbf{J}_A = -D_{AB} \nabla c_A where the nabla symbol ∇ denotes the gradient operator, D AB is the diffusion coefficient (m 2 ·s −1 ) of component A diffusing through component B, c A is the concentration (mol/m 3 ) of component A. This flux has units of mol·m −2 ·s −1 , and fits Maxwell's original definition of flux. For dilute gases, kinetic molecular theory relates the diffusion coefficient D to the particle density n = N/V, the molecular mass m, the collision cross section \sigma , and the absolute temperature T by D = \frac{2}{3 n\sigma}\sqrt{\frac{kT}{\pi m}} where the second factor is the mean free path and the square root (with the Boltzmann constant k) is the mean velocity of the particles. In turbulent flows, the transport by eddy motion can be expressed as a grossly increased diffusion coefficient. \rho = \psi^* \psi = |\psi|^2. So the probability of finding a particle in a differential volume element d 3 r is dP = |\psi|^2 \, d^3\mathbf{r}. Then the number of particles passing perpendicularly through unit area of a cross-section per unit time is the probability flux; \mathbf{J} = \frac{i \hbar}{2m} \left(\psi \nabla \psi^* - \psi^* \nabla \psi \right). This is sometimes referred to as the probability current or current density, or probability flux density. \Phi_F=\iint_A\mathbf{F}\cdot\mathrm{d}\mathbf{A} \Phi_F=\iint_A\mathbf{F}\cdot\mathbf{n}\,\mathrm{d}A where F is a vector field, and dA is the vector area of the surface A, directed as the surface normal. For the second, n is the outward pointed unit normal vector to the surface. The surface has to be orientable, i.e. two sides can be distinguished: the surface does not fold back onto itself. Also, the surface has to be actually oriented, i.e. we use a convention as to flowing which way is counted positive; flowing backward is then counted negative. The surface normal is usually directed by the right-hand rule. Conversely, one can consider the flux the more fundamental quantity and call the vector field the flux density. Often a vector field is drawn by curves (field lines) following the "flow"; the magnitude of the vector field is then the line density, and the flux through a surface is the number of lines. Lines originate from areas of positive divergence (sources) and end at areas of negative divergence (sinks). See also the image at right: the number of red arrows passing through a unit area is the flux density, the curve encircling the red arrows denotes the boundary of the surface, and the orientation of the arrows with respect to the surface denotes the sign of the inner product of the vector field with the surface normals. If the surface encloses a 3D region, usually the surface is oriented such that the influx is counted positive; the opposite is the outflux. The divergence theorem states that the net outflux through a closed surface, in other words the net outflux from a 3D region, is found by adding the local net outflow from each point in the region (which is expressed by the divergence). If the surface is not closed, it has an oriented curve as boundary. Stokes' theorem states that the flux of the curl of a vector field is the line integral of the vector field over this boundary. This path integral is also called circulation, especially in fluid dynamics. Thus the curl is the circulation density. We can apply the flux and these theorems to many disciplines in which we see currents, forces, etc., applied through areas. In free space the electric displacement is given by the constitutive relation D = ε 0 E, so for any bounding surface the D-field flux equals the charge Q A within it. Here the expression "flux of" indicates a mathematical operation and, as can be seen, the result is not necessarily a "flow", since nothing actually flows along electric field lines. \Phi_B=\iint_A\mathbf{B}\cdot\mathrm{d}\mathbf{A} with the same notation above. The quantity arises in Faraday's law of induction, where the magnetic flux is time-dependent either because the boundary is time-dependent or magnetic field is time-dependent. In integral form: - \frac{{\rm d} \Phi_B}{ {\rm d} t} = \oint_{\partial A} \mathbf{E} \cdot d \boldsymbol{\ell} where d is an infinitesimal vector line element of the closed curve \partial A , with magnitude equal to the length of the infinitesimal line element, and direction given by the tangent to the curve \partial A , with the sign determined by the integration direction. The time-rate of change of the magnetic flux through a loop of wire is minus the electromotive force created in that wire. The direction is such that if current is allowed to pass through the wire, the electromotive force will cause a current which "opposes" the change in magnetic field by itself producing a magnetic field opposite to the change. This is the basis for inductors and many electric generators.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1372247097 under CC BY-SA 4.0; modifications have been made.
References
1 claim could not be tied to a specific sentence and is listed in the table below instead.