Fluxonium

In quantum computing, the fluxonium is a type of superconducting qubit architecture used for gate-based quantum computation that is insensitive to offset charge noise.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In quantum computing, the fluxonium is a type of superconducting qubit architecture used for gate-based quantum computation that is insensitive to offset charge noise. It is constructed from a Josephson junction, a capacitor, and a “superinductor” (a type of inductor) arranged in a loop.

The fluxonium was first proposed as a candidate for a qubit by an experimental group at Yale University led by Michel Devoret in 2009. It is a flux-like qubit, meaning that its energy levels correspond to integer numbers of magnetic flux/phase states.

This architecture has long coherence times and high anharmonicity (or nonlinearity), both of which are important for successful qubit architectures. By changing the relative values of the different circuit components, fluxoniums can be engineered to have other properties, such as resistance to noise.

However, the design requires complex fabrication methods, and is therefore difficult to scale. The fluxonium architecture has achieved among the strongest coherence for any solid-state superconducting qubit, with millisecond-level coherence times.

Fluxoniums are a candidate for a qubit in a quantum processor, with some companies like D-Wave, Atlantic Quantum, and Qilimanjaro focused specifically on developing fluxonium-based quantum computing hardware. \hat{H} = 4 E_C \hat{N}^2 + \frac{1}{2} E_L \hat{\varphi}^2 - E_J \cos\!\left(\hat{\varphi} - 2\pi \frac{\Phi_{\mathrm{ext}}}{\Phi_0}\right) where E_J is the Josephson energy; E_C is the charging energy of the total capacitance; E_L is the superinductor's inductive energy; \hat{N} is the Cooper-pair number operator and \hat{\varphi} is the superconducting phase across the Josephson junction. The large inductive energy term, \frac{1}{2} E_L \hat{\varphi}^2 , comes from the superinductor.

The Josephson term includes a flux offset, \Phi_{\mathrm{ext}} , demonstrating that the properties of the fluxonium are strongly flux-dependent. Tuning the flux changes the shape of the potential and the sensitivity to flux noise, so choosing a good operating point is necessary for the fluxonium.

The most common operating point is the half-flux point {\Phi_{\mathrm{ext}}} = {\Phi_0}/2 because it is insensitive to flux noise at first order. The wavefunctions at this bias point are symmetric double wells. At exactly this point, there is maximal coherence, and protection from flux noise, since it is since it is first-order insensitive to it.

At this external bias point, the fluxonium has a resonant frequency between 100 MHz and 1 GHz, and can have a relaxation time of over 1 ms. At this operating point, the dispersive shift \chi can be very small, so one strategy is to bias slightly off of {\Phi_0}/2 for readout.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1370484339 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001370484339 · captured 1787302021.0 · version history

Cite this page as: encyclopegia.org, “Fluxonium”, snapshot enwiki-001370484339. https://encyclopegia.org/a/fluxonium

Sources cited in this revision

17 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.