Lesson plan
FO4
In digital electronics, Fan-out of 4 is a measure of time used in digital CMOS technologies: the gate delay of a component with a fan-out of 4. Fan out = C load / C in , where :C load = total MOS gate capacitance driven by the logic gate under consideration :C in = the MOS gate capacitance of the logic gate under consideration As a delay metric, one FO4 is the delay of an inverter, driven by an inverter 4× smaller than itself, and driving an inverter 4× larger than itself. Both conditions are necessary since input signal rise/fall time affects the delay as well as output loading. FO4 is generally used as a delay metric because such a load is generally seen in case of tapered buffers driving large loads, and approximately in any logic gate of a logic path sized for minimum delay. Also, for most technologies the optimum fanout for such buffers generally varies from 2.7 to 5.3. A fan out of 4 is the answer to the canonical problem stated as follows: Given a fixed size inverter, small in comparison to a fixed large load, minimize the delay in driving the large load. After some math, it can be shown that the minimum delay is achieved when the load is driven by a chain of N inverters, each successive inverter ~4× larger than the previous; N ~ log 4 (C load /C in ) .…
Article summary
In digital electronics, Fan-out of 4 is a measure of time used in digital CMOS technologies: the gate delay of a component with a fan-out of 4. Fan out = C load / C in , where :C load = total MOS gate capacitance driven by the logic gate under consideration :C in = the MOS gate capacitance of the logic gate under consideration As a delay metric, one FO4 is the delay of an inverter, driven by an inverter 4× smaller than itself, and driving an inverter 4× larger than itself. Both conditions are necessary since input signal rise/fall time affects the delay as well as output loading. FO4 is generally used as a delay metric because such a load is generally seen in case of tapered buffers driving large loads, and approximately in any logic gate of a logic path sized for minimum delay. Also, for most technologies the optimum fanout for such buffers generally varies from 2.7 to 5.3. A fan out of 4 is the answer to the canonical problem stated as follows: Given a fixed size inverter, small in comparison to a fixed large load, minimize the delay in driving the large load. After some math, it can be shown that the minimum delay is achieved when the load is driven by a chain of N inverters, each successive inverter ~4× larger than the previous; N ~ log 4 (C load /C in ) .…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.