Focal-plane shutter
≈ 4 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
In camera design, a focal-plane shutter (FPS) is a type of photographic shutter that is positioned immediately in front of the focal plane of the camera, that is, right in front of the photographic film or image sensor.
In camera design, a focal-plane shutter (FPS) is a type of photographic shutter that is positioned immediately in front of the focal plane of the camera, that is, right in front of the photographic film or image sensor.
Focal-plane shutter at low speed
Figure 1: The black rectangle represents the frame aperture through which the exposure is made. It is currently covered by the first shutter curtain, shown in red. The second shutter curtain shown in green is on the right side.
Figure 2: The first shutter curtain moves fully to the left allowing the exposure to be made. At this point, the flash is made to fire if one is attached and ready to do so. Figure 3: After the required amount of exposure, the second shutter curtain moves to the left to cover the frame aperture.
When the shutter is recocked the shutter curtains are wound back to the right-hand side ready for the next exposure. This is a graphical representation only; the actual mechanisms are much more complex. For example, the shutter curtains actually roll on and off spools at either side of the frame aperture so as to use as little space as possible.
Faster shutter speeds are achieved by the second curtain closing before the first one has fully opened; this results in a vertical slit that travels horizontally across the film. Faster shutter speeds simply require a narrower slit, as the speed of travel of the shutter curtains is not normally varied.
Focal-plane shutter at high speed
Figure 1: The black rectangle represents the frame aperture through which the exposure is made. It is currently covered by the first shutter curtain, shown in red. The second shutter curtain shown in green is on the right side.
Figure 2: The first shutter curtain begins to move to the left allowing the exposure to be made. Because the exposure requires a very fast shutter speed, the second curtain begins to move across at a set distance from the first one. Figure 3: The first shutter curtain continues to travel across the frame aperture followed by the second curtain.
It would be pointless to use an electronic flash with this shutter speed as the short duration flash would expose only a very small amount of the frame as the rest is covered by either the first or second shutter curtain. Figure 4: The first shutter curtain finishes moving, followed closely by the second curtain which is now covering the frame aperture completely.
When the shutter is recocked both shutter curtains are wound back to the right-hand side ready for the next exposure. Horizontal cloth FP shutters are normally limited to 1/1000 s maximum speed because of the difficulties in precisely timing extremely narrow slits and the unacceptable distortion resulting from a relatively slow wipe speed.
Their maximum flash synchronization speed is also limited because the slit is fully open only to the film gate (36 mm wide or wider) and able to be flash exposed up to 1/60 s X-synchronization (nominal; 18 ms = 1/55 s actual maximum; in reality, a 40 mm slit to allow for variance gives 1/50 s ⅓ stop slow). Some horizontal FP shutters exceeded these limits by narrowing the slit or increasing curtain velocity beyond the norm; however, these tended to be ultra-high-precision models used in expensive professional-level cameras.
The first such shutter was to be found in the Konica F, released in February 19601. Called the Hi-Synchro, this shutter reached a speed of 1/2000 s and made possible flash synchronization at 1/125 s.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1369537314 under CC BY-SA 4.0; modifications have been made.
References
- ↩Wikipedia “Focal-plane shutter” release date (×1) · confidence 0.95 revision URL