Folk classification

Uses your system voice; voice and rate in settings.

Snapshot

≈ 6 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Folk classification, in geology, is a technical descriptive classification of sedimentary rocks devised by Robert L. Folk, an influential sedimentary petrologist and Professor Emeritus at the University of Texas.

The Folk classification, in geology, is a technical descriptive classification of sedimentary rocks devised by Robert L. Folk, an influential sedimentary petrologist and Professor Emeritus at the University of Texas.

Folk's sandstone (clastic) classification

Folk's philosophy is that the name of a rock must convey as much information as possible without being a complete description. For this, he proposed five important properties of sandstones to use as defining characteristics. These five properties are: grain size, chemically precipitated cements, textural maturity, miscellaneous transported constituents, and clan designation. Folk's fivefold name must be in the following format: (Grain size): (chemically precipitated cements) (textural maturity) (miscellaneous transported constituents) (clan designation) However, Folk stated that cements and miscellaneous transported constituents are optional categories as they are not always observed. The other three properties should always be mentioned. The following are examples of rock names using Folk's fivefold name: Coarse sandstone: calcitic submature micaceous subarkose Fine sandstone: supermature quartzarenite Sandy granule conglomerate: calcitic submature calclithite Very fine sandstone: chert-cemented submature quartzose phyllarenite Clayey very fine sandstone: immature fossiliferous plagioclase arkose

Miscellaneous transported constituents

Miscellaneous transported constituents are any grains that do not fall into the categories described by the QFR diagram. These usually include heavy minerals or fossil fragments. These constituents provide a signature for the observed formation and will help correlating between various samples.

Textural maturity

Textural maturity is a property that relates to the amount of mechanical energy input on transported sediments through the abrasive power of currents and tides. It is observed in certain characteristics such as rounding and sorting of the grains. Folk states that as more mechanical energy is applied to transported sediment, this sediment will pass through the following four stages sequentially: Immature stage: The sediment contains more than 5% clay and sand grains are poorly sorted and angular. Submature stage: The sediment contains less than 5% clay and sand grains are poorly sorted and subangular to subrounded. Mature stage: The sediment contains little to no clay and sand grains are well sorted but not well rounded. Supermature stage: Sediment contains no clay and sand grains are well sorted and well rounded.

Cements

Cements are authigenic minerals precipitated in the pores of clastic rocks. The composition and texture of these cements depends on the chemistry of the water in the pore, the surrounding mineralogy, and the temperature and pressure conditions during cementation.

Grain size name

Grain size refers to the diameter of the largest possible inscribed circle in a grain. In Folk's classification scheme, one uses the Wentworth scale to find the appropriate grain size name.

Folk's carbonate classification

Folk's carbonate rock classification details the relative proportions of allochems in the rock and the type of matrix. The classification scheme covers most common carbonate rocks, however the more inclusive although less precise alternative, Dunham classification, may be preferred in some instances. Folk classification consists of one or two prefixes followed by a suffix. A recent study of carbonate classification within academia and industry by Lokier and Al Junaibi (2016) has highlighted a strong decline in the use of the Folk Classification with 89% of classifications employing some form of the Dunham classification system.

Suffixes

The suffix -sparite is used if the rock has a crystalline matrix, and -micrite if it contains a micritic, or mud-based, matrix.

Prefixes

The prefix describing the main (non-matrix) component of the rock immediately precedes the suffix, a second prefix describing a second important component may be tagged on to the front of this. oo- used to denote the presence of ooids bio- used to describe biogenetic remnants - for example, shells, echinoderm ossicles or other tests pel- describes the presence of peloids (fossilised fecal pellets). May also be used to describe any pellet under 2 mm in diameter (as peloids are often hard to distinguish from intraclasts after diagenesis) intra- denotes the presence of intraclasts, for example quartz grains or carbonate clasts eroded from the surrounding rocks.

Example

A rock consisting mainly of ooids with some shelly fragments, with a crystalline matrix, would be termed a biooosparite.

Components Gallery

Image:CarmelOoids.jpg|Thin-section of a biooosparite with calcitic ooids and sparry calcite cement; Carmel Formation, Middle Jurassic, of southern Utah, USA. Image:OoidSurface01.jpg|Biooosparite with calcitic ooids and sparry calcite cement; Carmel Formation, Middle Jurassic, of southern Utah, USA. Image:GeopetalCarboniferousNV.jpg|Thin section of a biopelsparite showing a geopetal structure consisting of peloid sediment and sparry calcite cement in a recrystallized bivalve shell; Bird Spring Formation (Carboniferous) of southern Nevada, USA. Image:BioclastsBiosparite.jpg|Bioclasts in an Ordovician biosparite of southern Ohio, USA.; T = trilobite; E = echinoderm Image:BrassfieldLimestoneClose050412.jpg|Broken surface of Brassfield Formation (Early Silurian, Ohio) showing coarse sparry cement.

Thin Section Gallery

Image:2904721 intra 20x PPL.jpg|Photomicrograph (PPL) of lithoclasts and skeletal material in an intrasparite. Image:R2614 intramic 20x PPL.jpg|Photomicrograph (PPL) of lithoclasts and skeletal material in an intramicrite. Note that some of the dark micrite has started to recrystallize in the left half of the image Image:MC Mml 094.4 20x b ppl.jpg|Photomicrograph (PPL) of an oosparite. Image: 110113-3 ooids 20x PPL.jpg|Photomicrograph (PPL) of an oomicrite from the Silurian Keel Formation, Oklahoma Image: R2574 PPL GRNST bivalve qtz 20x.jpg|Photomicrograph (PPL) of a biosparite Image: SAC Mml 087-6 20x a ppl 1.jpg|Photomicrograph (PPL) of a biomicrite from the Mississippian Lodgepole Formation, SW Montana Image: 1208208 pelsparite 20x PPL.jpg|Photomicrograph (PPL) of a pelsparite. Image: 050607-3 pelmic 20x PPL.jpg|Photomicrograph (PPL) of a possible pelmicrite. Note that the odds of being able to distinguish peloids from the surrounding micrite are slim. Image: BM Dj 20.45A Stromo 20x PPL.jpg|Photomicrograph (PPL) of a stromatoporoid boundstone. Image: SAC Mml 014-0 20x b ppl.jpg|Photomicrograph (PPL) of a lime mudstone. Image: 050607-3 dismicrite 20x PPL.jpg|Photomicrograph (PPL) of a dismicrite Image: Cpi rxl 20x PPL.jpg|Photomicrograph (PPL) of a recrystallized (and dolomitized) limestone

See also

Dunham classification Gazzi-Dickinson method QFL Diagram, similar to the QFR diagram of the Folk classification system.

References

Folk, R.L. (1980) Petrology of Sedimentary Rocks (pdf), Austin (Texas), Hemphill

Text derived from https://en.wikipedia.org/w/index.php?oldid=1337390576 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001337390576 · captured 1770609082.0 · version history

Cite this page as: encyclopegia.org, “Folk classification”, snapshot enwiki-001337390576. https://encyclopegia.org/a/folk-classification

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.