Ford Barra engine

motor vehicle engine

Uses your system voice; voice and rate in settings.

Q5467655Snapshot

≈ 6 min read

Names in other languages

  • EnglishFord Barra engine
  • РусскийFord Barra
  • 日本語Barraエンジン

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Barra is a series of internal combustion engines manufactured by Ford Australia between 20021 and 2016. Barra engines comprise locally-developed and produced inline-six engines (I6s) and Canadian-produced V8 engines. The Barra inline-six was developed by Ford Australia and built in Geelong, Victoria.

It is a descendant of the original Falcon Six from 1960. It was utilised by the Australian manufactured Ford Falcon and Territory, first introduced in the Ford Falcon (BA) in 2002, continuing production until 26 September 2016, coinciding with the end of production of the Falcon and Territory on 7 October.

It was produced in versions running on petrol, with a turbocharged variant, and liquefied petroleum gas. The Barra V8s are versions of the Ford Modular engine, built at the Essex Engine Plant in Windsor, Ontario. It was introduced in 2002 with the BA Falcon and were discontinued with the release of the Ford Falcon (FG) in 20081.

Barra 182

The Barra 182 was released in 2002, and was standard in the BA Falcon, Fairmont, and Fairlane. It was the standard engine in the SX Territory when it released in 20041. It was more powerful, had more torque, was six per cent more efficient than the previous engine, and complied with Euro II emissions standards.

It was also 20 per cent more powerful than Holden's Ecotec (Buick V6 engine) in the VX II Commodore. Power: Torque: Compression ratio: 9.7:1

Barra 190

The Barra 190 was released in 20051, and was standard in the BF Falcon and SY Territory. It increased in compression ratio, power by , and torque by and had dual independent variable camshaft timing. Efficiency was improved by two to six per cent.

In 2006 it was made compliant with Euro III emissions standards. Power: at 5250 rpm Torque: at 2500 rpm Compression ratio: 10.3:1

Barra 195

The Barra 195 was released in 2008, and was the final revision of the naturally aspirated inline-six. It was used in the FG Falcon, FG X Falcon, and SZ Territory.

It had a plastic inlet manifold, replacing the previous heavier alloy manifold, an electric throttle body, and a redesigned 'Fast Burn' cylinder head with a faster burn rate in the combustion chamber caused by an additional swirl. It increased the power by , torque by and was more fuel efficient. In 2010 it was made compliant with Euro IV emissions standards.

Power: at 6000 rpm Torque: at 3250 rpm Compression ratio: 10.3:1

Barra 240T

The Barra 240T engine was introduced in 2002, in the BA Falcon XR6 Turbo. It is based on the Barra 182, it has a single Garrett GT3582R turbocharger with of boost, different pistons lowering the compression ratio, higher fuel pressure, Inconel exhaust valve, and an intercooler. Power: at 5250 rpm Torque: at 2000–4500 rpm Compression ratio: 8.7:1

Barra 245T

The Barra 245T engine was introduced in 2005, in the BF Falcon XR6 Turbo. The power was increased by and torque by , meets Euro III emissions standards, received stronger pistons, and a new, redesigned intake manifold, with the release of the BF series II the engine received strengthened connecting rods from the Barra E-Gas, and improved valve springs.

It was also used in the 2006 to 2011 SY Territory Turbo, where it had a top-mounted intercooler, instead of a front-mounted one like the Falcon. Power: at 5250 rpm Torque: at 2000–4500 rpm Compression ratio: 8.9:1

Barra 270T (FPV)

The Barra 270T engine was used by Ford Performance Vehicles (FPV), in the BA and BF Falcon-based FPV F6 Typhoon and Tornado, and the SY Territory-based FPV F6X. It was based on the Barra 240T/245T, the increase in power is achieved through the use of improved pistons, larger intercooler, strengthened connecting rods and revised air intake. It was produced between 2004 and 2009. Power: at 5250 rpm Torque: at 2000–4250 rpm Compression ratio: 8.7:1

Barra 270T (FG)

The Barra 270T engine was used in the FG and FG X XR6 Turbo, and was introduced in 2008. The turbocharger was changed for a smaller one which spools faster, with a smaller intercooler and injectors, a new intake and higher compression ratio, boost was increased to , the power was increased by and torque by , with an overboost feature increasing the boost by 10 per cent.

In 2010 it was made compliant with Euro IV emissions standards. Power: at 5250 rpm Torque: at 2000–4750 rpm. Compression ratio: 8.8:1

Barra 310T

The Barra 310T was used in the FG Falcon-based FPV F6, introduced in 2008. It increases the power by and torque by , the boost was increased to . It was the first Australian engine to produce per litre.

It was updated in 2010 to be compliant with Euro IV emissions standards. It was discontinued in 2014, with Ford closing down Ford Performance Vehicles. Power: at 5500 rpm Torque: at 1950–5200 rpm Compression ratio: 8.47:1

Barra 325T

The Barra 325T was used in the FG X XR6 Sprint in 2016, it was the final and most powerful Barra engine, and the most powerful six-cylinder engine built in Australia. It uses the turbocharger and fuel injectors from the Barra 310T, a larger intercooler and a carbon fibre air intake, it increased the power by to and torque by to , with overboost increasing it to and . Power: at 6000 rpm.

Overboost: Torque: at 2750 rpm. Overboost: Compression ratio: 8.8:1

Barra E-Gas

The Barra E-Gas was launched in 2002, with the BA Falcon. It was an autogas (LPG) only engine. It featured a Vialle venturi system, without any LPG injector system, and with stronger H-section connecting rods and valves.

In 2005, with the release of the BF Falcon the torque was raised from to . In the FG Falcon the durability of the engine was improved with revised seals and valves. Power: at 4750–5000 rpm Torque: at 2750–3000 rpm Compression ratio (BA E-Gas): 10.7:1 Compression ratio (BF / FG E-Gas): 10.3:1

Barra EcoLPi

The Barra EcoLPi was launched in 2011 in the FG Falcon, and replaced the E-Gas engine. It features a liquid phase injection system. In the FG X Falcon the anti-roll bars for the EcoLPI were revised. Power: at 5000 rpm Torque: at 3250 rpm Compression ratio: 12.0:1

See also

Undersquare Ford of Australia modern V8s

Text derived from https://en.wikipedia.org/w/index.php?oldid=1376497560 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “Ford Barra engine” revision 1376497560 · retrieved 2026-10-20 release date (×4) · confidence 0.95 revision URL