Lesson plan

Forecasting (heating)

Forecasting is a method of controlling building heating by calculating demand for heating energy that should be supplied to the building in each time unit. By combining physics of structures with meteorology, properties of the building, weather conditions including outdoor temperature, wind power and direction, as well as solar radiation can be taken into account. In the case of conventional heating control, only current outdoor temperature is considered. The starting point for developing the method of forecasting was the ENLOSS mathematical energy balance model developed by Prof. Roger Taesler from Swedish Meteorological and Hydrological Institute in cooperation with Thorbjörn Geiser and Stefan Berglund, who are currently both employed at eGain Sweden AB. Forecasting method began to be introduced to use in the late 1980s. Until 2010 inclusive, forecasting method has been introduced in nearly seven million square metres of floorage of residential buildings and commercial premises. Forecasting method is offered and developed by many companies and organizations. Estimated data indicate 10 - 15 kWh/m2 reduction of average annual heat energy consumption. Since forecasting method contains information about future demand and is not in conflict with other methods of increasing energy efficiency, it is always a good foreground solution.

Back to article

Article summary

Forecasting is a method of controlling building heating by calculating demand for heating energy that should be supplied to the building in each time unit. By combining physics of structures with meteorology, properties of the building, weather conditions including outdoor temperature, wind power and direction, as well as solar radiation can be taken into account. In the case of conventional heating control, only current outdoor temperature is considered. The starting point for developing the method of forecasting was the ENLOSS mathematical energy balance model developed by Prof. Roger Taesler from Swedish Meteorological and Hydrological Institute in cooperation with Thorbjörn Geiser and Stefan Berglund, who are currently both employed at eGain Sweden AB. Forecasting method began to be introduced to use in the late 1980s. Until 2010 inclusive, forecasting method has been introduced in nearly seven million square metres of floorage of residential buildings and commercial premises. Forecasting method is offered and developed by many companies and organizations. Estimated data indicate 10 - 15 kWh/m2 reduction of average annual heat energy consumption. Since forecasting method contains information about future demand and is not in conflict with other methods of increasing energy efficiency, it is always a good foreground solution.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.