Forensic firearm examination

hollow-point bullet viewed from the side, showing the intended terminal ballistics sometimes referred to as mushrooming Forensic firearm examination is the forensic process of examining the characteristics of firearms or bullets left…

Uses your system voice; voice and rate in settings.

≈ 10 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

hollow-point bullet viewed from the side, showing the intended terminal ballistics sometimes referred to as mushrooming Forensic firearm examination is the forensic process of examining the characteristics of firearms or bullets left behind at a crime scene. Specialists in this field try to link bullets to weapons and weapons to individuals.

They can raise and record obliterated serial numbers in an attempt to find the registered owner of a weapon and look for fingerprints on a weapon and cartridges. By examining unique striations impressed into a bullet from the barrel of a gun, expended ammunition can be linked back to a specific weapon. These striations are due to the rifling inside the barrels of firearms.

Rifling spins the bullet when it is fired out of the barrel to improve precision. Although bullet striations are individualized unique evidence, microscopic striations in the barrel of the weapon are subject to change slightly, after each round that is fired. For this reason, forensic ballistics examiners may not fire more than five shots from a weapon found at a scene.

Known exemplars taken from a seized weapon can be compared to samples recovered from a scene using a comparison microscope as well as newer 3-D imaging technology. Striation images can also be uploaded to national databases. Furthermore, the markings can be compared to other images in an attempt to link one weapon to multiple crime scenes.

Like all forensic specialties, forensic's firearm examiners are subject to being called to testify in court as expert witnesses. However, the reliability of some techniques of forensic firearm examination have been criticized.

Fingerprint recovery

Fingerprint recovery from the surface of firearms is done with cyanoacrylate (more commonly known as superglue) fuming. Firearms are placed in a specially designed fume hood designed to evenly distribute fumes instead of removing them. Liquid superglue is placed in a container and heated until it is in a gaseous state.

The circulating fumes adhere to the oils left behind by the fingerprint, turning the print white. The resulting white print can be enhanced with fingerprint powder to increase the contrast of the white print against the weapon's finish.

While using the fuming technique on recovered guns is commonplace, the recovery of fingerprints from the surfaces of a firearm is challenging due to the textured grip and the general condition of recovered weapons. If fingerprints are recovered, they can be processed through fingerprint databases such as the Integrated Automated Fingerprint Identification System (IAFIS).

Various parts of the recovered weapon can also be tested for touch DNA left by whoever handled it. However, the low levels of DNA that can be recovered presents numerous issues such as contamination and analysis anomalies such as allele drop-out and drop-in.

Serial number recovery

Serial number examinations are a form of tool mark analysis. Serial numbers became commonplace after the United States passed the Gun Control Act of 1968. This law mandated that all guns manufactured in or imported into the country have a serial number.

Prior to 1968, many firearms either did not have a serial number or the serial numbers were not unique and were reused by a manufacturer on multiple firearms. If a recovered weapon has had the serial numbers altered or destroyed, examiners can attempt to recover the original numbers.

The two main methods for the restoration of serial numbers are magnetic particle inspection and chemical restoration. It is recommended that magnetic particle inspection be performed first due to the nondestructive nature of the method. If magnetic particle inspection fails, chemical restoration is the next step in the forensic analysis.

If the serial number is successfully restored it can be used to help investigators track the weapon's history, as well as potentially determine who owns the weapon. Firearm databases such as the National Crime Information Center of the United States and INTERPOL's Firearm Reference Table can be used by investigators to track weapons that have been lost, stolen, or used previously in other crimes.

Magnetic particle inspection

Originally developed as a method to detect flaws or irregularities in magnetic materials, magnetic particle inspection can be used on firearms to visualize the serial number underneath the obliterated area. When performing this technique, examiners place the weapon in a magnetic field. The irregularities in the metal, in this case the serial number, cause the field to deform.

When a solution of ferrous particles is added to the weapon's magnetized surface they will be attracted to the area where the magnetic field has deformed and will build up in the area. If fluorescent particles are added to the ferrous solution, ultraviolet light can be used to make it easier to visualize any recovered serial number.

Chemical restoration

Chemical restoration is a type of chemical milling. Typically, chemical milling is used to slowly remove material to create a desired shape. In serial number restoration, small amounts of metal are removed until variations in the metal corresponding to the serial number are visible.

This is possible because stamping the numbers distorts the grain boundary structure underneath the surface of the metal. However, chemical restoration is limited to that depth and is only successful when the obliteration of the serial number is superficial. Examiners performing a restoration first sand the area where the serial number used to be.

This removes any debris from the area left when the serial number was obliterated. The examiner then chooses a chemical, usually an acid, that will be used to slowly bring the number back to the surface. The type of chemical that is used depends on the material the weapon is made of.

These acids can range from Fry's Reagent for a magnetic metal, which is a mixture of hydrochloric acid, cupric chloride, and distilled water, to an acidic ferric chloride solution for a non-magnetic, non-aluminum material.

Class characteristics

Preliminary examination of the bullet can exclude a large number of weapons by examining the general characteristics of a recovered bullet. By determining general aspects of the fired ammunition, a number of weapons can be immediately excluded as being incapable of firing that type of bullet.

The make and model of the weapon can also be inferred from the combination of different class characteristics that are common to specific manufactures. The three main class characteristics of all bullets are the lands and grooves, the caliber of the bullet, and the rifling twist. All three can be tied directly to the type of barrel that was used to fire the bullet.

The lands and grooves of barrel are the bumps and valleys created when the rifling is created. The caliber is the diameter of the barrel. The twist is the direction of the striations left by the barrel's rifling, clockwise (right-handed) or counterclockwise (left-handed).

Most barrels will have a right-handed twist with the exception of weapons created by the Colt's Manufacturing Company which uses left-handed twists. Weapon barrels that match the class characteristics of recovered bullets can be examined further for individual characteristics to determine if the bullet came from that particular weapon.

Individual characteristics

In order to compare individual striations, examiners must obtain a known sample using the seized weapon. For slower-traveling bullets, such as pistols or revolvers, known bullet exemplars are created by firing the weapon into a water tank. The spent bullet can be recovered, intact, as the water slows down the bullet before it can reach the tank walls.

For faster traveling bullets, such as those fired from high-powered rifles and military style weapons, water tanks cannot be used as the tank will not provide enough stopping power for the projectiles. To examine these weapons, investigators must fire them at a target at a controlled range with enough backing to stop the bullet and collect the spent round after it has been fired.

Once a known exemplar is produced, the evidence sample can be compared to the known by examining both at the same time with a comparison microscope. Striations that line up are examined more closely, looking for multiple consecutive matches.

There is no set number of consecutive matches that equates to a match declaration, and examiners are trained to use the phrase "sufficient agreement" when testifying. The degree to which an examiner can make that determination is based on their training and expertise. All findings by examiners are subject to questioning by both sides, prosecution and defense, during testimony in court.

Striation databasing

Bullets and casings found at a scene require a known example to compare to in order to match them to a weapon. Without a weapon, the striation pattern can be uploaded to a database such as the National Integrated Ballistic Identification Network (NIBIN) maintained by the ATF or the United Kingdom's National Ballistics Intelligence Service (NABIS).

Information uploaded to these databases can be used to track gun crimes and to link crimes together. Maintainers of these databases recommend that every recovered firearm be test fired and the resulting known exemplar be uploaded into the database.

When an image is uploaded, NIBIN's "Correlation Engine" automatically uses algorithms to compare its unique markings against millions of existing records, and generates a list of potential matches. Before a physical examination, a technician uses an IBIS MATCHPOINT analysis to perform a side-by-side comparison, of the digital images.

If the technician and reviewer agree on a match, its considered a "NIBIN Lead." This lead is not a final conclusion, and more so a step forward in the investigation. A "NIBIN Hit" is reached when a qualified firearm expert and other methods of examination, are compared physically, and shown a match.

In the 1990s, there were two databases that were formed for storage of pictures of shell casings and bullets in gun crimes. The first was the Drugfire system which was used by the FBI. The second, the IBIS (Integrated Ballistic Identification System) was created by Forensic Technology, Inc. and eventually bought by the Alcohol Tobacco and Firearms (ATF) in 1993.

The FBI and ATF realized that their systems would not work together, and they needed to find a way to share information between them. The NIBIN board was created in 1997, in hopes of creating one imaging system.

A year after the creation of the NIBIN board, both the ATF and FBI decided to put their resources together toward one of the systems, and created the National Integrated Ballistics Information Network, with IBIS as the system.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1374792745 under CC BY-SA 4.0; modifications have been made.

Words in each sectionSerial number recoverySerial number recoverySerial number recovery: 516 words516Striation databasingStriation databasingStriation databasing: 362 words362Individual characterist…Individual characteristicsIndividual characteristics: 224 words224Class characteristicsClass characteristicsClass characteristics: 206 words206Fingerprint recoveryFingerprint recoveryFingerprint recovery: 188 words188
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001374792745 · captured 2026-09-14 · ledger · version history

Cite this page as: encyclopegia.org, “Forensic firearm examination”, snapshot enwiki-001374792745. https://encyclopegia.org/a/forensic-firearm-examination

Sources cited in this revision

29 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.