Lesson plan
FOUP
FOUP (an acronym for front-opening unified pod or front-opening universal pod ) is a specialized plastic carrier designed to hold silicon wafers securely and safely in a controlled environment, and to allow the wafers to be transferred between machines for processing or measurement. FOUPs began to appear along with the first 300mm wafer processing tools in the mid 1990s. The size of the wafers and their comparative lack of rigidity meant that SMIF pods were not a viable form factor. FOUP standards were developed by SEMI and SEMI members to ensure that FOUPs and all equipment that interacts with FOUPs work together seamlessly. Transitioning from a SMIF pod to a FOUP design, the removable cassette used to hold wafers was replaced by fixed wafer columns. The door was relocated from a bottom orientation to a front orientation, where automated handling equipment can access the wafers. Pitch for a 300 mm FOUP is 10 mm, while 13 slot FOUPs can have a pitch up to 20 mm. The weight of a fully loaded 25 wafer FOUP is between 7 and 9 kilograms which means that automated material handling systems are essential for all but the smallest of fabrication plants.…
Article summary
FOUP (an acronym for front-opening unified pod or front-opening universal pod ) is a specialized plastic carrier designed to hold silicon wafers securely and safely in a controlled environment, and to allow the wafers to be transferred between machines for processing or measurement. FOUPs began to appear along with the first 300mm wafer processing tools in the mid 1990s. The size of the wafers and their comparative lack of rigidity meant that SMIF pods were not a viable form factor. FOUP standards were developed by SEMI and SEMI members to ensure that FOUPs and all equipment that interacts with FOUPs work together seamlessly. Transitioning from a SMIF pod to a FOUP design, the removable cassette used to hold wafers was replaced by fixed wafer columns. The door was relocated from a bottom orientation to a front orientation, where automated handling equipment can access the wafers. Pitch for a 300 mm FOUP is 10 mm, while 13 slot FOUPs can have a pitch up to 20 mm. The weight of a fully loaded 25 wafer FOUP is between 7 and 9 kilograms which means that automated material handling systems are essential for all but the smallest of fabrication plants.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.