Four-point flexural test

The four-point flexural test provides values for the modulus of elasticity in bending E_f , flexural stress \sigma_f , flexural strain \varepsilon_f and the flexural stress-strain response of the material.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The four-point flexural test provides values for the modulus of elasticity in bending E_f , flexural stress \sigma_f , flexural strain \varepsilon_f and the flexural stress-strain response of the material. This test is very similar to the three-point bending flexural test.

The major difference being that with the addition of a fourth bearing the portion of the beam between the two loading points is put under maximum stress, as opposed to only the material right under the central bearing in the case of three-point bending. This difference is of prime importance when studying brittle materials, where the number and severity of flaws exposed to the maximum stress is directly related to the flexural strength and crack initiation.

Compared with the three-point bending flexural test, there are no shear forces in the four-point bending flexural test in the area between the two loading pins. The four-point bending test is therefore particularly suitable for brittle materials that cannot withstand shear stresses very well.

It is one of the most widely used apparatus to characterize fatigue and flexural stiffness of asphalt mixtures. \sigma_f = \frac{3}{4}\frac{F L}{b d^2} for four-point bending test where the loading span is 1/2 of the support span (rectangular cross section) \sigma_f = \frac{F L}{b d^2} for four-point bending test where the loading span is 1/3 of the support span (rectangular cross section) \sigma_f = \frac{3}{2}\frac{F L}{b d^2} for three-point bending test (rectangular cross section) in these formulas the following variables are used: \sigma_f = Stress in outer fibers at midpoint, (MPa) F = load at a given point on the load deflection curve, (N) L = Support span, (mm) b = Width of test beam, (mm) d = Depth or thickness of tested beam, (mm)

ASTM C1161: Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature ASTM D6272: Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending ASTM C393: Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure ASTM D7249: Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure ASTM D7250: Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness ASTM C78: Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

Text derived from https://en.wikipedia.org/w/index.php?oldid=1350129847 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.