Frequency divider
≈ 3 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A frequency divider, also called a clock divider or scaler or prescaler, is a circuit that takes an input signal of a frequency, f_{in} , and generates an output signal of a frequency: : f_{out} = \frac{f_{in}}{N} where N is an integer. Phase-locked loop frequency synthesizers make use of frequency dividers to generate a frequency that is a multiple of a reference frequency. Frequency dividers can be implemented for both analog and digital applications.
A frequency divider, also called a clock divider or scaler or prescaler, is a circuit that takes an input signal of a frequency, f_{in} , and generates an output signal of a frequency: f_{out} = \frac{f_{in}}{N} where N is an integer. Phase-locked loop frequency synthesizers make use of frequency dividers to generate a frequency that is a multiple of a reference frequency. Frequency dividers can be implemented for both analog and digital applications.
Regenerative
A regenerative frequency divider, also known as a Miller frequency divider, mixes the input signal with the feedback signal from the mixer. The feedback signal is f_{in}/2 . This produces sum and difference frequencies f_{in}/2 , 3f_{in}/2 at the output of the mixer. A low pass filter removes the higher frequency, and the f_{in}/2 frequency is amplified and fed back into the mixer.
Injection-locked
A free-running oscillator which has a small amount of a higher-frequency signal fed to it, will tend to oscillate in step with the input signal. Such frequency dividers were essential in the development of television. It operates similarly to an injection locked oscillator. In an injection-locked frequency divider, the frequency of the input signal is a multiple (or fraction) of the free-running frequency of the oscillator. While these frequency dividers tend to be lower power than broadband static (or flip-flop-based) frequency dividers, the drawback is their low locking range. The ILFD locking range is inversely proportional to the quality factor (Q) of the oscillator tank. In integrated circuit designs, this makes an ILFD sensitive to process variations. Care must be taken to ensure the tuning range of the driving circuit (for example, a voltage-controlled oscillator) must fall within the input locking range of the ILFD.
Mixed signal
(Classification: asynchronous sequential logic) An arrangement of D flip-flops is a classic method for integer-n division. Such division is frequency and phase coherent to the source over environmental variations, including temperature. The easiest configuration is a series where each D flip-flop is a divide-by-2. For a series of three of these, such a system would be a divide-by-8. More complicated configurations have been found that generate odd factors, such as a divide-by-5. Standard, classic logic chips that implement this or similar frequency division functions include the 7456, 7457, 74292, and 74294. (see list of 7400 series and list of 4000 series logic chips)
See also
Pulse-swallowing counter
References
External links
Delta-sigma fractional-n synthesizers A Study of High Frequency Regenerative Frequency Dividers Digital frequency dividers Divide by 2, and asynchronous 2 N Ripple Counter dividers - Electronics Tutorials Synchronous divide by 3, 6, 9, 12 with 50% duty cycle output - ON Semiconductor - Archived Synchronous divide by 3 or 5 with 50% duty cycle output, and divide by 1.5 & 2.5 circuits - Xilinx - Archived Divide by N-0.5 using 74x161 counters - Whitepaper
Text derived from https://en.wikipedia.org/w/index.php?oldid=1333968910 under CC BY-SA 4.0; modifications have been made.