Frequency response
In signal processing, electronics and mechanical vibration, the frequency response of a system is the quantitative measure of the magnitude and phase of the output as a function of input frequency.
≈ 5 min read
Frequency response. encyclopegia.org, snapshot enwiki-001378296363. /a/frequency-response
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
In signal processing, electronics and mechanical vibration, the frequency response of a system is the quantitative measure of the magnitude and phase of the output as a function of input frequency. The frequency response is widely used in the design and analysis of systems, such as audio equipment and control systems, where they simplify mathematical analysis by converting governing differential equations into algebraic equations.
In an audio system, it may be used to minimize audible distortion by designing components (such as microphones, amplifiers and loudspeakers) so that the overall response is as flat (uniform) as possible across the system's bandwidth. In control systems, such as a vehicle's cruise control, it may be used to assess system stability, often through the use of Bode plots.
Systems with a specific frequency response can be designed using analog and digital filters. The frequency response characterizes systems in the frequency domain, just as the impulse response characterizes systems in the time domain.
In linear systems (or as an approximation to a real system, neglecting second-order non-linear properties), either response completely describes the system, and thus there is a one-to-one correspondence: the frequency response is the Fourier transform of the impulse response. The frequency response allows simpler analysis of cascaded systems such as multistage amplifiers, as the response of the overall system can be found through multiplication of the individual stages' frequency responses (as opposed to convolution of the impulse response in the time domain).
The frequency response is closely related to the transfer function in linear systems, which is the Laplace transform of the impulse response. They are equivalent when the real part \sigma of the transfer function's complex variable s = \sigma + j\omega is zero.
In the context of mechanical vibration, the frequency response of a system is usually referred to as the frequency response function (FRF), with the (complex) ratio of harmonic displacement to force input referred to as receptance, and acceleration and velocity FRFs referred to respectively as mobility and accelerance.
Applications
In the audible range, frequency response is usually referred to in connection with electronic amplifiers, microphones and loudspeakers. Radio spectrum frequency response can refer to measurements of coaxial cable, twisted-pair cable, video switching equipment, Wireless communications devices, and antenna systems.
Infrasonic frequency response measurements include earthquakes and electroencephalography (brain waves). Frequency response curves are often used to indicate the accuracy of electronic components or systems.
When a system or component reproduces all desired input signals with no emphasis or attenuation of a particular frequency band, the system or component is said to be "flat", or to have a flat frequency response curve. In other cases, 3D-form of frequency response graphs are sometimes used. Frequency response requirements differ depending on the application.
In high fidelity audio, an amplifier requires a flat frequency response of at least 20–20,000 Hz, with a tolerance as tight as ±0.1 dB in the mid-range frequencies around 1000 Hz; however, in telephony, a frequency response of 400–4,000 Hz, with a tolerance of ±1 dB is sufficient for intelligibility of speech. Once a frequency response has been measured (e.g., as an impulse response), provided the system is linear and time-invariant, its characteristic can be approximated with arbitrary accuracy by a digital filter.
Similarly, if a system is demonstrated to have a poor frequency response, a digital or analog filter can be applied to the signals prior to their reproduction to compensate for these deficiencies. The form of a frequency response curve is very important for anti-jamming protection of radars, communications and other systems.
Frequency response analysis can also be applied to biological domains, such as the detection of hormesis in repeated behaviors with opponent process dynamics, or in the optimization of drug treatment regimens.
See also
Audio system measurements Bandwidth (signal processing) Bode plot Impulse response Spectral sensitivity Steady state (electronics) Transient response Universal dielectric response
References
Notes Bibliography Luther, Arch C.; Inglis, Andrew F. Video engineering, McGraw-Hill, 1999. Stark, Scott Hunter. Live Sound Reinforcement, Vallejo, California, Artistpro.com, 1996–2002.
L. R. Rabiner and B. Gold. Theory and Application of Digital Signal Processing. – Englewood Cliffs, NJ: Prentice-Hall, 1975. – 720 pp
External links
University of Michigan: Frequency Response Analysis and Design Tutorial Smith, Julius O. III: Introduction to Digital Filters with Audio Applications has a nice chapter on Frequency Response
Text derived from https://en.wikipedia.org/w/index.php?oldid=1378296363 under CC BY-SA 4.0; modifications have been made.