Frequency-shift keying

Frequency-shift keying (FSK) is a frequency modulation scheme in which digital information is encoded on a carrier signal by periodically shifting the frequency of the carrier between several discrete frequencies.

Uses your system voice; voice and rate in settings.

≈ 8 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Frequency-shift keying (FSK) is a frequency modulation scheme in which digital information is encoded on a carrier signal by periodically shifting the frequency of the carrier between several discrete frequencies. The technology is used for communication systems such as telemetry, weather balloon radiosondes, caller ID, garage door openers, and low frequency radio transmission in the VLF and ELF bands.

The simplest FSK is binary FSK (BFSK, which is also commonly referred to as 2FSK or 2-FSK), in which the carrier is shifted between two discrete frequencies to transmit binary (0s and 1s) information.

Modulating and demodulating

Reference implementations of FSK modems exist and are documented in detail. The demodulation of a binary FSK signal can be done using the Goertzel algorithm very efficiently, even on low-power microcontrollers.

Continuous-phase frequency-shift keying

In principle FSK can be implemented by using completely independent free-running oscillators, and switching between them at the beginning of each symbol period. In general, independent oscillators will not be at the same phase and therefore the same amplitude at the switch-over instant, causing sudden discontinuities in the transmitted signal.

In practice, many FSK transmitters use only a single oscillator, and the process of switching to a different frequency at the beginning of each symbol period preserves the phase. The elimination of discontinuities in the phase (and therefore elimination of sudden changes in amplitude) reduces sideband power, reducing interference with neighboring channels.

Gaussian frequency-shift keying

Rather than directly modulating the frequency with the digital data symbols, "instantaneously" changing the frequency at the beginning of each symbol period, Gaussian frequency-shift keying (GFSK) filters the data pulses with a Gaussian filter to make the transitions smoother. This filter has the advantage of reducing sideband power, reducing interference with neighboring channels, at the cost of increasing intersymbol interference.

It is used by Improved Layer 2 Protocol, DECT, Bluetooth, Cypress WirelessUSB, Nordic Semiconductor, Texas Instruments, IEEE 802.15.4, Z-Wave and Wavenis devices, and by the popular FT8 digimodes used in amateur radio as implemented by WSJT-X and PSK Reporter software. For basic data rate Bluetooth the minimum deviation is 115 kHz.

A GFSK modulator differs from a simple frequency-shift keying modulator in that before the baseband waveform (with levels −1 and +1) goes into the FSK modulator, it is passed through a Gaussian filter to make the transitions smoother to limit spectral width. Gaussian filtering is a standard way to reduce spectral width; it is called pulse shaping in this application.

In ordinary non-filtered FSK, at a jump from −1 to +1 or +1 to −1, the modulated waveform changes rapidly, which introduces large out-of-band spectrum. If the pulse is changed going from −1 to +1 as −1, −0.98, −0.93, ..., +0.93, +0.98, +1, and this smoother pulse is used to determine the carrier frequency, the out-of-band spectrum will be reduced.

Minimum-shift keying

Minimum frequency-shift keying or minimum-shift keying (MSK) is a particular spectrally efficient form of coherent FSK. In MSK, the difference between the higher and lower frequency is identical to half the bit rate. Consequently, the waveforms that represent a 0 and a 1 bit differ by exactly half a carrier period.

The maximum frequency deviation is δ = 0.25 f m , where f m is the maximum modulating frequency. As a result, the modulation index m is 0.5. This is the smallest FSK modulation index that can be chosen such that the waveforms for 0 and 1 are orthogonal.

Gaussian minimum-shift keying

A variant of MSK called Gaussian minimum-shift keying (GMSK) is used in the GSM mobile phone standard.

Multilevel frequency-shift keying

Phase 1 radios in the Project 25 system use 4-level frequency-shift keying (4FSK).

Applications

In 1910, Reginald Fessenden invented a two-tone method of transmitting Morse code. Dots and dashes were replaced with different tones of equal length. The intent was to minimize transmission time.

Some early Continuous Wave (CW) transmitters employed an arc converter that could not be conveniently keyed. Instead of turning the arc on and off, the key slightly changed the transmitter frequency in a technique known as the compensation-wave method. The compensation-wave was not used at the receiver.

Spark transmitters used for this method consumed a lot of bandwidth and caused interference, so it was discouraged by 1921. Most early telephone-line modems used audio frequency-shift keying (AFSK) to send and receive data at rates up to about 1200 bits per second. The Bell 103 and Bell 202 modems used this technique.

Even today, North American caller ID uses 1200 baud AFSK in the form of the Bell 202 standard. Some early microcomputers used a specific form of AFSK modulation, the Kansas City standard, to store data on audio cassettes and other magnetic tape. AFSK is still widely used in amateur radio, as it allows data transmission through unmodified voiceband equipment.

The Specific Area Message Encoding (SAME) protocol, most commonly used in The United States' Emergency Alert System, utilizes AFSK data bursts to transmit data at a rate of 520 5⁄6 bits per second. This allows SAME-enabled radio receivers to activate upon demodulation of the header information.

The CHU shortwave radio station in Ottawa, Ontario, Canada broadcasts an exclusive digital time signal encoded using AFSK modulation.

Caller ID and remote metering standards

Frequency-shift keying (FSK) is commonly used over telephone lines for caller ID (displaying callers' numbers) and remote metering applications. There are several variations of this technology.

European Telecommunications Standards Institute

In some countries of Europe, the European Telecommunications Standards Institute (ETSI) standards 200 778-1 and -2 – replacing 300 778-1 & -2 – allow 3 physical transport layers (Telcordia Technologies (formerly Bellcore), British Telecom (BT) and Cable Communications Association (CCA)), combined with 2 data formats Multiple Data Message Format (MDMF) & Single Data Message Format (SDMF), plus the Dual-tone multi-frequency (DTMF) system and a no-ring mode for meter-reading and the like. It's more of a recognition that the different types exist than an attempt to define a single "standard".

Telcordia Technologies

The Telcordia Technologies (formerly Bellcore) standard is used in the United States, Canada (but see below), Australia, China, Hong Kong and Singapore. It sends the data after the first ring tone and uses the 1200 bits per second Bell 202 tone modulation. The data may be sent in SDMF – which includes the date, time and number – or in MDMF, which adds a NAME field.

British Telecom

British Telecom (BT) in the United Kingdom developed their own standard, which wakes up the display with a line reversal, then sends the data as CCITT v.23 modem tones in a format similar to MDMF. It is used by BT, wireless networks like the late Ionica, and some cable companies.

Details are to be found in BT Supplier Information Notes (SINs) 227 (link broken 28/7/21) and 242 (link broken 28/7/21); another useful document is Designing Caller Identification Delivery Using XR-2211 for BT from the EXAR website.

Cable Communications Association

The Cable Communications Association (CCA) of the United Kingdom developed their own standard which sends the information after a short first ring, as either Bell 202 or V.23 tones. They developed a new standard rather than change some "street boxes" (multiplexors) which couldn't cope with the BT standard.

The UK cable industry use a variety of switches: most are Nortel DMS-100; some are System X; System Y; and Nokia DX220. Note that some of these use the BT standard instead of the CCA one. The data format is similar to the BT one, but the transport layer is more like Telcordia Technologies, so North American or European equipment is more likely to detect it.

See also

Amplitude-shift keying (ASK) Continuous-phase frequency-shift keying (CPFSK) Dual-tone multi-frequency (DTMF), another encoding technique representing data by pairs of audio frequencies Frequency-change signaling Multiple frequency-shift keying (MFSK) Orthogonal frequency-division multiplexing (OFDM) Phase-shift keying (PSK) Federal Standard 1037C MIL-STD-188 Spread frequency-shift keying (S-FSK)

References

. Revised to April 24, 1921.

dFSK: Distributed Frequency Shift Keying Modulation in Dense Sensor Networks M Nasseri, J Kim, M Alam - Proceedings of the 17th Communications & Networking, 2014, Unified metric calculation of sampling-based turbo-coded noncoherent MFSK for mobile channel J Kim, P Raorane, M Nasseri, M Alam - Proceedings of the 46th Annual Simulation Symposium, 2013, Performance analysis of sampling-based turbo coded NCQFSK for image data transmission

Text derived from https://en.wikipedia.org/w/index.php?oldid=1372921099 under CC BY-SA 4.0; modifications have been made.

Words in each sectionApplicationsApplicationsApplications: 256 words256Gaussian frequency-shif…Gaussian frequency-shift keyingGaussian frequency-shift keying: 238 words238Cable Communications As…Cable Communications AssociationCable Communications Association: 119 words119Continuous-phase freque…Continuous-phase frequency-shift keyingContinuous-phase frequency-shift keying: 102 words102Minimum-shift keyingMinimum-shift keyingMinimum-shift keying: 99 words99European Telecommunicat…European Telecommunications Standards InstituteEuropean Telecommunications Standards Institute: 91 words91British TelecomBritish TelecomBritish Telecom: 91 words91Telcordia TechnologiesTelcordia TechnologiesTelcordia Technologies: 64 words64See alsoSee alsoSee also: 41 words41Modulating and demodula…Modulating and demodulatingModulating and demodulating: 31 words31Caller ID and remote me…Caller ID and remote metering standardsCaller ID and remote metering standards: 27 words27Gaussian minimum-shift …Gaussian minimum-shift keyingGaussian minimum-shift keying: 17 words17Multilevel frequency-sh…Multilevel frequency-shift keyingMultilevel frequency-shift keying: 13 words13
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001372921099 · captured 2026-09-02 · ledger · version history

Cite this page as: encyclopegia.org, “Frequency-shift keying”, snapshot enwiki-001372921099. https://encyclopegia.org/a/frequency-shift-keying

Sources cited in this revision

12 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.