Fuel injection

Fuel injection is the introduction of fuel in an internal combustion engine, most commonly automotive engines, by means of a fuel injector.

Uses your system voice; voice and rate in settings.

≈ 4 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Fuel injection is the introduction of fuel in an internal combustion engine, most commonly automotive engines, by means of a fuel injector. This article focuses on fuel injection in reciprocating piston and Wankel rotary engines.

All compression-ignition engines (e.g., diesel engines), and many spark-ignition engines (i.e., petrol (gasoline) engines, such as Otto or Wankel), use fuel injection of one kind or another. Mass-produced diesel engines for passenger cars (such as the Mercedes-Benz OM 138) became available in the late 1930s and early 1940s, being the first fuel-injected engines for passenger car use.

In passenger car petrol engines, fuel injection was introduced in the early 1950s and gradually gained prevalence until it had largely replaced carburettors by the early 1990s. The primary difference between carburetion and fuel injection is that fuel injection atomizes the fuel through a small nozzle under high pressure.

In contrast, carburetion relies on suction created by intake air accelerated through a Venturi tube to draw fuel into the airstream. The term "fuel injection" is vague and encompasses various distinct systems with fundamentally different functional principles. The only commonality among fuel injection systems is the absence of carburetion.

There are two main functional principles of mixture formation systems for internal combustion engines: "internal" and "external." A fuel injection system that uses external mixture formation is called a manifold injection system. There exist two types of manifold injection systems: multi-point (or "port") and single-point (or "throttle body") injection.

Internal mixture formation systems can be separated into several varieties of "direct" and "indirect" injection; the most common is common rail injection, a form of direct injection. The term "electronic fuel injection" refers to any fuel injection system controlled by an engine control unit.

1980s–present: digital electronics and common-rail injection

Prior to 1979, the electronics in fuel injection systems used analogue electronics for the control system. The Bosch Motronic multi-point fuel injection system (also amongst the first systems where the ignition system is controlled by the same device as the fuel injection system) was the first mass-produced system to use digital electronics.

The Ford EEC-III single-point fuel injection system, introduced in 1980, was another early digital fuel injection system. These and other electronic manifold injection systems (using either port injection or throttle-body injection) became more widespread through the 1980s, and by the early 1990s they had replaced carburettors in most new petrol-engined cars sold in developed countries.

The aforementioned injection systems for petrol passenger car engines except for the 1954–1959 Mercedes-Benz 300 SL all used manifold injection (i.e. the injectors located at the intake ports or throttle body, instead of inside the combustion chamber). This began to change when the first mass-produced petrol direct injection system for passenger cars was a common rail system introduced in the 1997 Mitsubishi 6G74 V6 engine.

The first common-rail system for a passenger car diesel engine was the 1997 model Alfa Romeo 156 2.4 JTD. The five-cylinder turbodiesel featured a high-pressure direct injection system developed by the Fiat Group and Magneteti Marelli and made by Bosch.

Since the 2010s, many petrol engines have switched to direct-injection (sometimes in combination with separate manifold injectors for each cylinder). Similarly, many modern diesel engines use a common-rail design. Stratified charge injection was used in several petrol engines in the early 2000s, such as the Volkswagen 1.4 FSI engine introduced in 2000.

However, the stratified charge systems were largely no longer in use by the late 2010s, due to increased exhaust emissions of gasses and particulates, along with the increased cost and complexity of the systems.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1376400589 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001376400589 · captured 2026-09-23 · ledger · version history

Cite this page as: encyclopegia.org, “Fuel injection”, snapshot enwiki-001376400589. https://encyclopegia.org/a/fuel-injection

Sources cited in this revision

23 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.