gas spring

Uses your system voice; voice and rate in settings.

Q266264Snapshot

≈ 6 min read

Names in other languages

  • РусскийГазовая пружина
  • УкраїнськаГазова пружина
  • DeutschGasdruckfeder
  • Englishgas spring
  • fiKaasujousi
  • SvenskaGasfjäder
  • 日本語ガスストラット
  • Nederlandsgasveer

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A gas spring, also known as a gas strut or gas damper, is a type of spring that, unlike a typical mechanical spring that relies on elastic deformation, uses compressed gas contained within an enclosed cylinder. They rely on a sliding piston to pneumatically store potential energy and withstand external force applied parallel to the direction of the piston shaft (loosely analogous similarly to a bicycle pump without a gas outlet).

Gas springs are used in automobiles to support hatches, hoods, and covers. They are also used in furniture and doors, as well as in medical beds. They are used industrially in machine tool presses.

Fast-acting gas springs are used in aerospace design and weapons applications, and large, extended gas springs are used in passive heave compensators, which stabilize drilling operations against waves. Gas springs are usually implemented in one of two ways. A pneumatic suspension gas spring directly compresses a chamber of air with the piston.

A hydro-pneumatic suspension gas spring instead compresses a chamber of oil linked to an accumulator in which the pressure of the oil compresses the gas. Nitrogen is a common gas in gas springs because it is inert and nonflammable.

A gas spring, also known as a gas strut or gas damper, is a type of spring that, unlike a typical mechanical spring that relies on elastic deformation, uses compressed gas contained within an enclosed cylinder. They rely on a sliding piston to pneumatically store potential energy and withstand external force applied parallel to the direction of the piston shaft (loosely analogous similarly to a bicycle pump without a gas outlet).

Gas springs are used in automobiles to support hatches, hoods, and covers. They are also used in furniture and doors, as well as in medical beds. They are used industrially in machine tool presses.

Fast-acting gas springs are used in aerospace design and weapons applications, and large, extended gas springs are used in passive heave compensators, which stabilize drilling operations against waves. Gas springs are usually implemented in one of two ways. A pneumatic suspension gas spring directly compresses a chamber of air with the piston.

A hydro-pneumatic suspension gas spring instead compresses a chamber of oil linked to an accumulator in which the pressure of the oil compresses the gas. Nitrogen is a common gas in gas springs because it is inert and nonflammable.

Principle of operation

A gas spring consists of a sealed cylinder filled with a charge of high-pressure gas, a piston rod attached to a piston with a sliding seal, and some oil. The piston (or the cylinder wall) contains a number of channels that allow the gas to transfer between the lower chamber (between the piston and the closed end of the cylinder) and the upper chamber (between the piston and the head cap).

This causes the pressure in both chambers to equalize no matter how far the piston is pushed down the tube. In the ideal case of a piston moving with zero friction through a fully sealed cylinder, there are two key phenomena which can be thought of as acting simultaneously inside the spring as it is compressed.

Firstly, as the spring is compressed and the piston rod is pushed into the cylinder, the gaseous volume of the cylinder decreases due to the extra space now being occupied by the solid piston rod. This would be the case even if there were no piston attached to the rod, as the volume of the rod displaces an equal volume of gas, but the total volume of the enclosing cylinder remains a constant.

This means the pressure of the gas increases. Second, the bottom of the piston always experiences a greater force opposite to the compressing action than the top, because pressure is a scalar quantity: it acts equally in all directions.

The gas on both sides of the piston will be at equal pressure due to the equalizing channels, but the gas in the "lower" chamber has more surface area of the piston available to push on than the gas in the "upper" chamber, due to the rod. Since pressure is force per unit area, more area at the same pressure necessarily means more force. This is the reason the piston is present.

Variations

A gas spring can be given adjustable push-in force via a local knob or remote via a Bowden wire. Extended stroke is usually acquired through telescoping mechanisms, composed of one rod and multiple cylinders, where the smaller of the two cylinders actually acts as a second rod extending in and out of the larger cylinder. There are also techniques to make variable-lift gas springs.

These are intended for short production runs and prototypes, and in applications where the exact force is important but hard to estimate in advance, such as lifting a lid slowly in a known time. In this case, the cylinder is supplied filled to maximum design pressure but equipped with a bleed port to allow gas to be released once installed.

The intention is that the design can be over-sprung, and then the pressure is reduced in stages to optimize behavior. If too much gas is released, a new spring must be installed. It is also possible to make degressive gas springs, where the spring becomes more, not less, powerful as the main cylinder expands.

See also

Pneumatic valve springs Shock absorber

Text derived from https://en.wikipedia.org/w/index.php?oldid=1337274173 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot gas-spring-031145-3390d807e4143cf6 · hash 3390d807e4143cf686ac0374d80c72f42a6f85ff08335c05fe5ad86d923e9399 · captured 1770553098.0 · version history

Cite this page as: encyclopegia.org, “gas spring”, snapshot gas-spring-031145-3390d807e4143cf6. https://encyclopegia.org/a/gas-spring

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.