Gate dielectric

field-effect transistor

Uses your system voice; voice and rate in settings.

Q5527011Snapshot

≈ 2 min read

Names in other languages

  • caDielèctric de porta
  • azQapı dielektriki
  • EnglishGate dielectric
  • فارسیدی‌الکتریک گیت
  • 한국어게이트 유전체
  • 日本語ゲート絶縁膜
  • 中文閘極介電層

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A gate dielectric is a dielectric used between the gate and substrate of a field-effect transistor (such as a MOSFET). In state-of-the-art processes, the gate dielectric is subject to many constraints, including: * Electrically clean interface to the substrate (low density of quantum states for electrons) * High capacitance, to increase the FET transconductance * High thickness, to avoid dielectric breakdown and leakage by quantum tunneling.

The capacitance and thickness constraints are almost directly opposed to each other. For silicon-substrate FETs, the gate dielectric is almost always silicon dioxide (called "gate oxide"), since thermal oxide has a very clean interface.

However, the semiconductor industry is interested in finding alternative materials with higher dielectric constants, which would allow higher capacitance with the same thickness.

A gate dielectric is a dielectric used between the gate and substrate of a field-effect transistor (such as a MOSFET). In state-of-the-art processes, the gate dielectric is subject to many constraints, including: Electrically clean interface to the substrate (low density of quantum states for electrons) High capacitance, to increase the FET transconductance High thickness, to avoid dielectric breakdown and leakage by quantum tunneling.

The capacitance and thickness constraints are almost directly opposed to each other. For silicon-substrate FETs, the gate dielectric is almost always silicon dioxide (called "gate oxide"), since thermal oxide has a very clean interface.

However, the semiconductor industry is interested in finding alternative materials with higher dielectric constants, which would allow higher capacitance with the same thickness.

History

In 1955, Carl Frosch and Lincoln Derrick accidentally grew a layer of silicon dioxide over the silicon wafer, for which they observed surface passivation effects. By 1957 Frosch and Derrick, using masking and predeposition, were able to manufacture silicon dioxide transistors and showed that silicon dioxide insulated, protected silicon wafers and prevented dopants from diffusing into the wafer.

Silicon dioxide remains the standard gate dielectric in MOSFET technology.

See also

QBD (electronics) Gate oxide

Text derived from https://en.wikipedia.org/w/index.php?oldid=1346196286 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.