Gate (hydraulic engineering)

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In hydraulic engineering, a gate is a rotating or sliding structure, supported by hinges or by a rotating horizontal or vertical axis, that can be located at an extreme of a large pipe or canal in order to control the flow of water or any fluid from one side to the other. It is usually placed at the mouth of irrigation channels to avoid water loss or at the end of drainage channels to elude water entrance.

In hydraulic engineering, a gate is a rotating or sliding structure, supported by hinges or by a rotating horizontal or vertical axis, that can be located at an extreme of a large pipe or canal in order to control the flow of water or any fluid from one side to the other. It is usually placed at the mouth of irrigation channels to avoid water loss or at the end of drainage channels to elude water entrance.

Limitations

The velocity of the fluid against a partly opened disk may cause vibration and chattering which will ultimately lead to damage to the seating surfaces. This is a common way that gate valves fail.

See also

Sluice Hydraulic containment

Hydraulic Hose Crimping Machine

Text derived from https://en.wikipedia.org/w/index.php?oldid=1361459429 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.