Gateaux derivative

In mathematics, the Gateaux differential or Gateaux derivative is a generalization of the concept of directional derivative in differential calculus.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 8 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In mathematics, the Gateaux differential or Gateaux derivative is a generalization of the concept of directional derivative in differential calculus. Named after René Gateaux, it is defined for functions between locally convex topological vector spaces such as Banach spaces.

Like the Fréchet derivative on a Banach space, the Gateaux differential is often used to formalize the functional derivative commonly used in the calculus of variations and physics. Unlike other forms of derivatives, the Gateaux differential of a function may be a nonlinear operator.

However, often the definition of the Gateaux differential also requires that it be a continuous linear transformation. Some authors, such as , draw a further distinction between the Gateaux differential (which may be nonlinear) and the Gateaux derivative (which they take to be linear).

In most applications, continuous linearity follows from some more primitive condition which is natural to the particular setting, such as imposing complex differentiability in the context of infinite dimensional holomorphy or continuous differentiability in nonlinear analysis.

Definition

Suppose X and Y are locally convex topological vector spaces (for example, Banach spaces), U \subseteq X is open, and f : U \to Y. The Gateaux differential df(x, v) of f at x \in U in the direction v \in X is defined as If the limit exists for all v \in X, then one says that F is Gateaux differentiable at x. The limit appearing in ( ) is taken relative to the topology of Y. If X and Y are real topological vector spaces, then the limit is taken for real t. On the other hand, if X and Y are complex topological vector spaces, then the limit above is usually taken as t \to 0 in the complex plane as in the definition of complex differentiability. In some cases, a weak limit is taken instead of a strong limit, which leads to the notion of a weak Gateaux derivative.

Linearity and continuity

At each point x \in U, the Gateaux differential defines a function df_x(v) : X \to Y. This function is homogeneous in the sense that for all scalars a , df_x(av) = a \, df_x(v). However, this function need not be additive, so that the Gateaux differential may fail to be linear, unlike the Fréchet derivative. Even if linear, it may fail to depend continuously on v if X and Y are infinite dimensional (i.e. in the case that df_x(v) is an unbounded linear operator).

Furthermore, for Gateaux differentials that linear and continuous in v, there are several inequivalent ways to formulate their continuous differentiability. For example, consider the real-valued function f of two real variables defined by f(x, y) = \begin{cases} \dfrac{x^3}{x^2+y^2} & \text{if } (x, y) \neq (0, 0), \\ 0 & \text{if } (x, y) = (0, 0). \end{cases} This is Gateaux differentiable at (0, 0) with its differential there being dF((0,0), (a, b)) = \begin{cases}\dfrac{f(t(a,b))-0}{t} & (a,b) \neq (0,0), \\ 0 & (a,b) = (0,0)\end{cases} Df(v) \colon v \mapsto df(x,v) then f is Fréchet differentiable on U with Fréchet derivative DF .

This is analogous to the result from basic complex analysis that a function is analytic if it is complex differentiable in an open set, and is a fundamental result in the study of infinite dimensional holomorphy. Continuous differentiability Continuous Gateaux differentiability may be defined in two inequivalent ways.

Suppose that F \colon U \to Y is Gateaux differentiable at each point of the open set U. One notion of continuous differentiability in U requires that the mapping on the product space df \colon U \times X \to Y be continuous. Linearity need not be assumed: if X and Y are Fréchet spaces, then df_x(v) is automatically bounded and linear for all x . A stronger notion of continuous differentiability requires that x \mapsto DF(x) be a continuous mapping U \to L(X,Y) from U to the space of continuous linear functions from X to Y. Note that this already presupposes the linearity of DF(x). As a matter of technical convenience, this latter notion of continuous differentiability is typical (but not universal) when the spaces X and Y are Banach, since L(X, Y) is also Banach and standard results from functional analysis can then be employed.

The former is the more common definition in areas of nonlinear analysis where the function spaces involved are not necessarily Banach spaces. For instance, differentiation in Fréchet spaces has applications such as the Nash–Moser inverse function theorem in which the function spaces of interest often consist of smooth functions on a manifold.

Higher derivatives

Whereas higher order Fréchet derivatives are naturally defined as multilinear functions by iteration, using the isomorphisms L^n(X, Y) = L(X, L^{n - 1}(X, Y)), higher order Gateaux derivative cannot be defined in this way. Instead the n th order Gateaux derivative of a function F : U \subseteq X \to Y in the direction h is defined by Rather than a multilinear function, this is instead a homogeneous function of degree n in h. There is another candidate for the definition of the higher order derivative, the function that arises naturally in the calculus of variations as the second variation of F, at least in the special case where F is scalar-valued.

However, this may fail to have any reasonable properties at all, aside from being separately homogeneous in h and k. It is desirable to have sufficient conditions in place to ensure that D^2 F(u)\{h, k\} is a symmetric bilinear function of h and k, and that it agrees with the polarization of d^n F. For instance, the following sufficient condition holds . Suppose that F is C^1 in the sense that the mapping DF : U\times X\to Y is continuous in the product topology, and moreover that the second derivative defined by ( ) is also continuous in the sense that D^2F : U\times X\times X\to Y is continuous.

Then D^2 F(u)\{h, k\} is bilinear and symmetric in h and k. By virtue of the bilinearity, the polarization identity holds D^2F(u)\{h,k\} = \frac{1}{2}d^2F(u;h+k)-d^2F(u;h)-d^2F(u;k) relating the second order derivative D^2 F(u) with the differential d^2 F(u; -). Similar conclusions hold for higher order derivatives.

Properties

A version of the fundamental theorem of calculus holds for the Gateaux derivative of F, provided F is assumed to be sufficiently continuously differentiable. Specifically: Suppose that F : X \to Y is C^1 in the sense that the Gateaux derivative is a continuous function dF : U \times X \to Y. Then for any u \in U and h \in X, F(u+h) - F(u) = \int_0^1 dF(u+th;h)\,dt where the integral is the Gelfand–Pettis integral (the weak integral) ( ).

Many of the other familiar properties of the derivative follow from this, such as multilinearity and commutativity of the higher-order derivatives. Further properties, also consequences of the fundamental theorem, include: (The chain rule) d(G\circ F)(u;x) = dG(F(u); dF(u;x)) for all u \in U and x \in X. (Importantly, as with simple partial derivatives, the Gateaux derivative does satisfy the chain rule if the derivative is permitted to be discontinuous.)

(Taylor's theorem with remainder) Suppose that the line segment between u \in U and u + h lies entirely within U. If F is C^k then F(u+h)=F(u)+dF(u;h)+\frac{1}{2!}d^2F(u;h)+\dots+\frac{1}{(k-1)!}d^{k-1}F(u;h)+R_k where the remainder term is given by R_k(u;h)=\frac{1}{(k-1)!}\int_0^1(1-t)^{k-1}d^kF(u+th;h)\,dt

Example

Let X be the Hilbert space of square-integrable functions on a Lebesgue measurable set \Omega in the Euclidean space \R^n. The functional E : X \to \R E(u) = \int_\Omega F(u(x)) \, dx where F is a real-valued function of a real variable and u is defined on \Omega with real values, has Gateaux derivative dE(u;\psi) = \langle F'(u),\psi \rangle := \int_\Omega F'(u(x))\,\psi(x) \,dx. Indeed, the above is the limit \tau \to 0 of \begin{align} \frac{E(u+\tau\psi) - E(u)}{\tau} & = \frac{1}{\tau} \left( \int_\Omega F(u+\tau\,\psi)\,dx - \int_\Omega F(u)\,dx \right) \\[6pt] & =\frac{1}{\tau} \left(\int_\Omega\int_0^1 \frac{d}{ds} F(u+s\,\tau\,\psi) \,ds\,dx\right) \\[6pt] & =\int_\Omega\int_0^1 F'(u+s\tau\psi)\,\psi \,ds\,dx. \end{align}

References

. . . . . .

Text derived from https://en.wikipedia.org/w/index.php?oldid=1377501888 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.