Gauss's method

Uses your system voice; voice and rate in settings.

Snapshot

≈ 9 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In orbital mechanics (a subfield of celestial mechanics), Gauss's method is used for preliminary orbit determination from at least three observations (more observations increases the accuracy of the determined orbit) of the orbiting body of interest at three different times. The required information are the times of observations, the position vectors of the observation points (in Equatorial Coordinate System), the direction cosine vector of the orbiting body from the observation points (from Topocentric Equatorial Coordinate System) and general physical data.

Working in 1801, Carl Friedrich Gauss developed important mathematical techniques (summed up in Gauss's methods) which were specifically used to determine the orbit of Ceres. The method shown following is the orbit determination of an orbiting body about the focal body where the observations were taken from, whereas the method for determining Ceres' orbit requires a bit more effort because the observations were taken from Earth while Ceres orbits the Sun.

In orbital mechanics (a subfield of celestial mechanics), Gauss's method is used for preliminary orbit determination from at least three observations (more observations increases the accuracy of the determined orbit) of the orbiting body of interest at three different times. The required information are the times of observations, the position vectors of the observation points (in Equatorial Coordinate System), the direction cosine vector of the orbiting body from the observation points (from Topocentric Equatorial Coordinate System) and general physical data.

Working in 1801, Carl Friedrich Gauss developed important mathematical techniques (summed up in Gauss's methods) which were specifically used to determine the orbit of Ceres. The method shown following is the orbit determination of an orbiting body about the focal body where the observations were taken from, whereas the method for determining Ceres' orbit requires a bit more effort because the observations were taken from Earth while Ceres orbits the Sun. \begin{align} \mathbf{R_n} &= \left [ {R_e \over \sqrt{1-(2f-f^2)\sin^2\phi_n}}+H_n \right ] \cos\phi_n(\cos\theta_n \ \mathbf{\hat{I}}+\sin\theta_n \ \mathbf{\hat{J}})+\left [ {R_e(1-f)^2 \over \sqrt{1-(2f-f^2)\sin^2\phi_n}}+H_n \right ] \sin\phi_n \ \mathbf{\hat{K}} \\ &= \left [ {R_e \over \sqrt{1-e^2\sin^2\phi_n}}+H_n \right ] \cos\phi_n(\cos\theta_n \ \mathbf{\hat{I}}+\sin\theta_n \ \mathbf{\hat{J}})+\left [ {R_e(1-e^2) \over \sqrt{1-e^2\sin^2\phi_n}}+H_n \right ] \sin\phi_n \ \mathbf{\hat{K}} \end{align} or \mathbf{R_n} = r_e\cos\phi'_n\cos\theta_n \ \mathbf{\hat{I}}+r_e\cos\phi'_n\sin\theta_n \ \mathbf{\hat{J}}+r_e\sin\phi'_n \ \mathbf{\hat{K}} where, \mathbf{R_n} is the respective observer position vector (in Equatorial Coordinate System) R_e is the equatorial radius of the central body (e.g., 6,378 km for Earth) r_e is the geocentric distance f is the oblateness (or flattening) of the central body (e.g., 0.003353 for Earth) e is the eccentricity of the central body (e.g., 0.081819 for Earth) \phi_n is the geodetic latitude (the angle between the normal line of horizontal plane and the equatorial plane) \phi'_n is the geocentric latitude (the angle between the radius and the equatorial plane) H_n is the geodetic altitude \theta_n is the local sidereal time of observation site \mathbf{\hat\boldsymbol{\rho}_n} = \cos\delta_n\cos\alpha_n \ \mathbf{\hat{I}}+\cos\delta_n\sin\alpha_n \ \mathbf{\hat{J}}+\sin\delta_n \ \mathbf{\hat{K}} where, \mathbf{\hat\boldsymbol{\rho}_n} is the respective unit vector in the direction of the position vector \rho (from observation point to orbiting body in Topocentric Equatorial Coordinate System) \delta_n is the respective declination \alpha_n is the respective right ascension \begin{align} \tau_1 &= t_1 - t_2 \\ \tau_3 &= t_3 - t_2 \\ \tau&= t_3 - t_1 \end{align} where \tau_n is the time interval t_n is the respective observation time \begin{align} \mathbf{p_1} &= \mathbf{\hat\boldsymbol{\rho}_2} \times \mathbf{\hat\boldsymbol{\rho}_3} \\ \mathbf{p_2} &= \mathbf{\hat\boldsymbol{\rho}_1} \times \mathbf{\hat\boldsymbol{\rho}_3} \\ \mathbf{p_3} &= \mathbf{\hat\boldsymbol{\rho}_1} \times \mathbf{\hat\boldsymbol{\rho}_2} \end{align} where \mathbf{a} \times \mathbf{b} is the cross product of vectors \mathbf{a} \text{ and } \mathbf{b} \mathbf{p_n} is the respective cross product vector \mathbf{\hat\boldsymbol{\rho}_n} is the respective unit vector D_0 = \mathbf{\hat\boldsymbol{\rho}_1} \cdot \mathbf{p_1} = \mathbf{\hat\boldsymbol{\rho}_1} \cdot (\mathbf{\hat\boldsymbol{\rho}_2} \times \mathbf{\hat\boldsymbol{\rho}_3}) where \mathbf{a} \cdot \mathbf{b} is the dot product of vectors \mathbf{a} and \mathbf{b} D_0 is the common scalar triple product \mathbf{p_n} is the respective cross product vector \mathbf{\hat\boldsymbol{\rho}_n} is the respective unit vector \begin{align} D_{11} &= \mathbf{R_1} \cdot \mathbf{p_1} & D_{12} &= \mathbf{R_1} \cdot \mathbf{p_2} & D_{13} &= \mathbf{R_1} \cdot \mathbf{p_3} \\ D_{21} &= \mathbf{R_2} \cdot \mathbf{p_1} & D_{22} &= \mathbf{R_2} \cdot \mathbf{p_2} & D_{23} &= \mathbf{R_2} \cdot \mathbf{p_3} \\ D_{31} &= \mathbf{R_3} \cdot \mathbf{p_1} & D_{32} &= \mathbf{R_3} \cdot \mathbf{p_2} & D_{33} &= \mathbf{R_3} \cdot \mathbf{p_3} \end{align} where D_{mn} is the respective scalar quantity \mathbf{R_m} is the respective observer position vector \mathbf{p_n} is the respective cross product vector \begin{align} A &= \frac{1}{D_0} \left ( -D_{12} \frac{\tau_3}{\tau}+D_{22}+D_{32} \frac{\tau_1}{\tau} \right ) \\ B &= \frac{1}{6D_0} \left [ D_{12} \left ( \tau_3^2-\tau^2 \right ) \frac{\tau_3}{\tau}+D_{32} \left (\tau^2-\tau_1^2 \right ) \frac{\tau_1}{\tau} \right ] \\ E &= \mathbf{R_2} \cdot \mathbf{\hat\boldsymbol{\rho}_2} \end{align} where A , B , and E are scalar position coefficients D_0 is the common scalar quantity D_{mn} is the respective scalar quantities \tau_n is the time interval R_n is the respective observer position vector \mathbf{\hat\boldsymbol{\rho}_n} is the respective unit vector {R_2}^2 = \mathbf{R_2} \cdot \mathbf{R_2} where {R_2}^2 is the squared distance of the second observation \mathbf{R_2} is the position vector of the second observation \begin{align} a &= -\left ( A^2+2AE+{R_2}^2 \right ) \\ b &= -2\mu B(A+E) \\ c &= -\mu^2 B^2 \end{align} where a \text{, } b \text{, and } c are coefficients of the scalar distance polynomial for the second observation of the orbiting body A \text{, } B \text{, and } E are scalar position coefficients \mu is the gravitational parameter of the focal body of the orbiting body {r_2}^8+a{r_2}^6+b{r_2}^3+c = 0 where r_2 is the scalar distance for the second observation of the orbiting body (it and its vector, r 2 , are in the Equatorial Coordinate System) a \text{, } b \text{, and } c are coefficients as previously stated Various methods can be used to find the root, a suggested method is the Newton–Raphson method.

The root must be physically possible (i.e., not negative nor complex) and if multiple roots are suitable, each must be evaluated and compared to any available data to confirm their validity. \begin{align} \rho_1 &= \frac{1}{D_0} \left [ \frac{6 \left ( D_{31} \dfrac{\tau_1}{\tau_3}+D_{21} \dfrac{\tau}{\tau_3} \right ) {r_2}^3+\mu D_{31} \left ( \tau^2-{\tau_1}^2 \right ) \dfrac{\tau_1}{\tau_3}}{6{r_2}^3+\mu \left ( \tau^2-{\tau_3}^2 \right ) } - D_{11}\right ] \\ \rho_2 &= A+ \frac{\mu B}{{r_2}^3} \\ \rho_3 &= \frac{1}{D_0} \left [ \frac{6 \left ( D_{13} \dfrac{\tau_3}{\tau_1}-D_{23} \dfrac{\tau}{\tau_1} \right ) {r_2}^3+\mu D_{13} \left ( \tau^2-{\tau_3}^2 \right ) \dfrac{\tau_3}{\tau_1}}{6{r_2}^3+\mu \left ( \tau^2-{\tau_1}^2 \right ) } - D_{33}\right ] \end{align} where \rho_n is the respective slant range (it and its vector, \mathbf{\rho_n} , are in the Topocentric Equatorial Coordinate System) D_0 is the common scalar quantity D_{mn} is the respective scalar quantities \tau_{(n)} is the time interval. r_2 is the scalar distance for the second observation of the orbiting body \mu is the gravitational parameter of the focal body of the orbiting body \begin{align} \mathbf{r_1} &= \mathbf{R_1}+\rho_1\mathbf{\hat\boldsymbol{\rho}_1} \\[1.7ex] \mathbf{r_2} &= \mathbf{R_2}+\rho_2\mathbf{\hat\boldsymbol{\rho}_2} \\[1.7ex] \mathbf{r_3} &= \mathbf{R_3}+\rho_3\mathbf{\hat\boldsymbol{\rho}_3} \end{align} where \mathbf{r_n} is the respective orbiting body position vector (in Equatorial Coordinate System) \mathbf{R_n} is the respective observer position vector \rho_n is the respective slant range \mathbf{\hat\boldsymbol{\rho}_n} is the respective unit vector \begin{align} f_1 &\approx 1-\frac{1}{2}\frac{\mu}{{r_2}^3}{\tau_1}^2 \\ f_3 &\approx 1-\frac{1}{2}\frac{\mu}{{r_2}^3}{\tau_3}^2 \\ g_1 &\approx \tau_1-\frac{1}{6}\frac{\mu}{{r_2}^3}{\tau_1}^3 \\ g_3 &\approx \tau_3-\frac{1}{6}\frac{\mu}{{r_2}^3}{\tau_3}^3 \end{align} where, f_1 , f_3 , g_1 and g_3 are the Lagrange coefficients (these are just the first two terms of the series expression based on the assumption of small time interval) \mu is the gravitational parameter of the focal body of the orbiting body r_2 is the scalar distance for the second observation of the orbiting body \tau_{(n)} is the time interval \mathbf{v_2} = \frac{1}{f_1 g_3 - f_3 g_1} \left(-f_3\mathbf{r_1}+f_1\mathbf{r_3}\right) where \mathbf{v_2} is the velocity vector for the second observation of the orbiting body (in Equatorial Coordinate System) f_1 , f_3 , g_1 and g_3 are the Lagrange coefficients \mathbf{r_n} is the respective orbiting body position vector

Text derived from https://en.wikipedia.org/w/index.php?oldid=1348610336 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.