Gaussian surface

Uses your system voice; voice and rate in settings.

Snapshot

≈ 5 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A Gaussian surface is a closed surface in three-dimensional space through which the flux of a vector field is calculated; usually the gravitational field, electric field, or magnetic field. It is an arbitrary closed surface (the boundary of a 3-dimensional region ) used in conjunction with Gauss's law for the corresponding field (Gauss's law, Gauss's law for magnetism, or Gauss's law for gravity) by performing a surface integral, in order to calculate the total amount of the source quantity enclosed; e.g., amount of gravitational mass as the source of the gravitational field or amount of electric charge as the source of the electrostatic field, or vice versa: calculate the fields for the source distribution.

For concreteness, the electric field is considered in this article, as this is the most frequent type of field the surface concept is used for. Gaussian surfaces are usually carefully chosen to match symmetries of a situation to simplify the calculation of the surface integral.

If the Gaussian surface is chosen such that for every point on the surface the component of the electric field along the normal vector is constant, then the calculation will not require difficult integration as the constants which arise can be taken out of the integral.

A Gaussian surface is a closed surface in three-dimensional space through which the flux of a vector field is calculated; usually the gravitational field, electric field, or magnetic field. It is an arbitrary closed surface (the boundary of a 3-dimensional region ) used in conjunction with Gauss's law for the corresponding field (Gauss's law, Gauss's law for magnetism, or Gauss's law for gravity) by performing a surface integral, in order to calculate the total amount of the source quantity enclosed; e.g., amount of gravitational mass as the source of the gravitational field or amount of electric charge as the source of the electrostatic field, or vice versa: calculate the fields for the source distribution.

For concreteness, the electric field is considered in this article, as this is the most frequent type of field the surface concept is used for. Gaussian surfaces are usually carefully chosen to match symmetries of a situation to simplify the calculation of the surface integral.

If the Gaussian surface is chosen such that for every point on the surface the component of the electric field along the normal vector is constant, then the calculation will not require difficult integration as the constants which arise can be taken out of the integral. | preintegral = \Phi_E = | intsubscpt = \scriptstyle S | integrand = \mathbf E\;\cdot\mathrm{d}\mathbf A = \frac{Q_{\text{enc}}}{\varepsilon_0}. }} Thereby is the electrical charge enclosed by the Gaussian surface. This is Gauss's law, combining both the divergence theorem and Coulomb's law. \iint_S dA = 4 \pi r^2 which implies \Phi_E = E 4\pi r^2 By Gauss's law the flux is also \Phi_E =\frac{Q_A}{\varepsilon_0} finally equating the expression for gives the magnitude of the -field at position : E 4\pi r^2 = \frac{Q_A}{\varepsilon_0} \quad \Rightarrow \quad E=\frac{Q_A}{4\pi\varepsilon_0r^2}.

This non-trivial result shows that any spherical distribution of charge acts as a point charge when observed from the outside of the charge distribution; this is in fact a verification of Coulomb's law. And, as mentioned, any exterior charges do not count. q = \lambda h , where is the charge enclosed in the Gaussian surface. There are three surfaces a, b and c as shown in the figure.

The differential vector area is , on each surface a, b and c. The flux passing consists of the three contributions: For surfaces a and b, and will be perpendicular. For surface c, and will be parallel, as shown in the figure. \begin{align} \Phi_E & = \iint_a E dA\cos 90^\circ + \iint_b E d A \cos 90^\circ + \iint_c E d A\cos 0^\circ \\ & = E \iint_c dA \end{align} The surface area of the cylinder is \iint_c dA = 2 \pi r h which implies \Phi_E = E 2 \pi r h. By Gauss's law \Phi_E = \frac{q}{\varepsilon_0} equating for yields E 2 \pi rh = \frac{\lambda h}{\varepsilon_0} \quad \Rightarrow \quad E = \frac{\lambda}{2 \pi\varepsilon_0 r}

See also

Area Surface area Vector calculus Integration Divergence theorem Faraday cage Field theory Field line

Further reading

Electromagnetism (2nd Edition), I.S. Grant, W.R. Phillips, Manchester Physics, John Wiley & Sons, 2008,

Fields - a chapter from an online textbook

Text derived from https://en.wikipedia.org/w/index.php?oldid=1335502661 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.