Lesson plan

Gc (engineering)

In engineering and physics, g c is a unit conversion factor used to convert mass to force or vice versa. It is defined as : g_\text{c} = \frac{ma}{F} In unit systems where force is a derived unit, like in SI units, g c is equal to 1. In unit systems where force is a primary unit, like in imperial and US customary measurement systems, g c may or may not equal 1 depending on the units used, and value other than 1 may be required to obtain correct results. For example, in the kinetic energy (KE) formula, if g c = 1 is used, then KE is expressed in foot-poundals; but if g c = 32.174 is used, then KE is expressed in foot-pounds.

Back to article

Article summary

In engineering and physics, g c is a unit conversion factor used to convert mass to force or vice versa. It is defined as : g_\text{c} = \frac{ma}{F} In unit systems where force is a derived unit, like in SI units, g c is equal to 1. In unit systems where force is a primary unit, like in imperial and US customary measurement systems, g c may or may not equal 1 depending on the units used, and value other than 1 may be required to obtain correct results. For example, in the kinetic energy (KE) formula, if g c = 1 is used, then KE is expressed in foot-poundals; but if g c = 32.174 is used, then KE is expressed in foot-pounds.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.