General MIDI

Uses your system voice; voice and rate in settings.

Snapshot

≈ 14 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

General MIDI (also known as GM or GM 1) is a standardized specification for electronic musical instruments that respond to MIDI messages. GM was developed by the American MIDI Manufacturers Association (MMA) and the Japan MIDI Standards Committee (JMSC) and first published in 19911. The official specification is available in English from the MMA, bound together with the MIDI 1.0 specification, and in Japanese from the Association of Musical Electronic Industry (AMEI). GM imposes several requirements beyond the more abstract MIDI 1.0 specification.

While MIDI 1.0 by itself provides a communication protocol which ensures that different instruments can interoperate at a fundamental level – for example, that pressing keys on a MIDI keyboard will cause an attached MIDI sound module to play musical notes – GM goes further in two ways. First, GM requires that all compliant MIDI instruments meet a certain minimal set of features, such as being able to play at least 24 notes simultaneously (polyphony).

Second, GM attaches specific interpretations to many parameters and control messages which were left unspecified in the MIDI 1.0 specification. For example, assigning one of the 128 possible MIDI Program Numbers selects an instrument. With MIDI 1.0, the assignment could be to an arbitrary instrument; but with GM, a program number assigns a specific instrument name.…

General MIDI (also known as GM or GM 1) is a standardized specification for electronic musical instruments that respond to MIDI messages. GM was developed by the American MIDI Manufacturers Association (MMA) and the Japan MIDI Standards Committee (JMSC) and first published in 1991. The official specification is available in English from the MMA, bound together with the MIDI 1.0 specification, and in Japanese from the Association of Musical Electronic Industry (AMEI). GM imposes several requirements beyond the more abstract MIDI 1.0 specification.

While MIDI 1.0 by itself provides a communication protocol which ensures that different instruments can interoperate at a fundamental level – for example, that pressing keys on a MIDI keyboard will cause an attached MIDI sound module to play musical notes – GM goes further in two ways. First, GM requires that all compliant MIDI instruments meet a certain minimal set of features, such as being able to play at least 24 notes simultaneously (polyphony).

Second, GM attaches specific interpretations to many parameters and control messages which were left unspecified in the MIDI 1.0 specification. For example, assigning one of the 128 possible MIDI Program Numbers selects an instrument. With MIDI 1.0, the assignment could be to an arbitrary instrument; but with GM, a program number assigns a specific instrument name. This helps ensure that playback of MIDI files sounds more consistent between different devices compliant with the GM specification.

However, it still leaves the actual sounds of each instrument up to the supplier to implement; one manufacturer's French horn, say, could be brighter, or more mellow, than another's. The GM 1 specification was extended by General MIDI 2 in 1999; however, GM 1 is still commonly used. General MIDI was widely supported by computer game developers in the 1990s.

Parameter interpretations

GM Instruments must also obey the following conventions for program and controller events:

Program change events

In MIDI, the instrument sound or "program" for each of the 16 possible MIDI channels is selected with the Program Change message, which has a Program Number parameter. The following table shows which instrument sound corresponds to each of the 128 possible GM Program Numbers. There are 128 program numbers. The numbers can be displayed as values 1 to 128, or, alternatively, as 0 to 127. The 0 to 127 numbering is usually only used internally by the synthesizer; the vast majority of MIDI devices, digital audio workstations and professional MIDI sequencers display these Program Numbers as shown in the table (1–128).

Piano

1 Acoustic Grand Piano or Piano 1 (based on a Steinway D model) 2 Bright Acoustic Piano or Piano 2 (based on a Yamaha C7) 3 Electric Grand Piano or Piano 3 (usually modeled after Yamaha CP-70) 4 Honky-tonk Piano or Piano 4 5 Electric Piano 1 (usually a Rhodes or Wurlitzer piano) 6 Electric Piano 2 (usually a Yamaha DX7 e. piano 1 preset) 7 Harpsichord (often with a fixed velocity level) 8 Clavinet

Chromatic Percussion

9 Celesta 10 Glockenspiel 11 Music Box 12 Vibraphone 13 Marimba 14 Xylophone 15 Tubular Bells 16 Dulcimer or Santoor

Organ

17 Drawbar Organ or Organ 1 (based on a Hammond B3) 18 Percussive Organ or Organ 2 (based on a Hammond B3 with percussion enabled) 19 Rock Organ or Organ 3 20 Church Organ or Organ 4 21 Reed Organ or Organ 5 22 Accordion 23 Harmonica 24 Tango Accordion or Bandoneon

Guitar

25 Acoustic Guitar (nylon) 26 Acoustic Guitar (steel) 27 Electric Guitar (jazz) 28 Electric Guitar (clean, often chorused, resembling a Stratocaster run through a Roland Jazz Chorus amplifier) 29 Electric Guitar (muted) 30 Overdriven Guitar 31 Distortion Guitar 32 Guitar Harmonics

Bass

On synthesizers, samplers and other electronic devices, bass sounds are often set one octave lower than other instruments. 33 Acoustic Bass (usually based on an upright jazz pizzicato or an acoustic bass guitar) 34 Electric Bass (finger) (usually based on a Fender Jazz Bass) 35 Electric Bass (picked) (usually based on a Fender Precision Bass) 36 Fretless Bass 37 Slap Bass 1 (slap bass 1 and 2 are based on the same Jazz and Precision basses as before) 38 Slap Bass 2 39 Synth Bass 1 (based on a minimoog bass sound) 40 Synth Bass 2 (based on a Yamaha DX7 e. bass 1 preset)

Strings

41 Violin 42 Viola 43 Cello 44 Contrabass 45 Tremolo Strings 46 Pizzicato Strings 47 Orchestral Harp 48 Timpani

Ensemble

49 String Ensemble 1 (often in marcato) 50 String Ensemble 2 (slower attack than String Ensemble 1) 51 Synth Strings 1 (usually roughly based on a Solina String Ensemble) 52 Synth Strings 2 (often similar to a Roland JP8 synthesizer, with chorus effect) 53 Choir Aahs 54 Voice Oohs (or Doos) 55 Synth Voice or Synth Choir 56 Orchestra Hit (based on a Fairlight CMI orch2 preset)

Brass

57 Trumpet 58 Trombone 59 Tuba 60 Muted Trumpet (based on a trumpet with a harmon mute) 61 French Horn 62 Brass Section 63 Synth Brass 1 (based roughly on an Oberheim OBx synthesizer) 64 Synth Brass 2 (usually based on a Yamaha CS-80 or Roland JP8)

Reed

65 Soprano Sax 66 Alto Sax 67 Tenor Sax 68 Baritone Sax 69 Oboe 70 English Horn 71 Bassoon 72 Clarinet

Pipe

73 Piccolo 74 Flute 75 Recorder 76 Pan Flute 77 Blown bottle 78 Shakuhachi 79 Whistle 80 Ocarina

Synth Lead

81 Lead 1 (square, often chorused) 82 Lead 2 (sawtooth or saw, often chorused) 83 Lead 3 (calliope, usually resembling a woodwind) 84 Lead 4 (chiff) 85 Lead 5 (charang, a guitar-like lead) 86 Lead 6 (voice, derived from "synth voice" with faster attack) 87 Lead 7 (fifths) 88 Lead 8 (bass and lead or solo lead or sometimes mistakenly called "brass and lead")

Synth Pad

89 Pad 1 (new age, pad stacked with a bell, often derived from "Fantasia" patch from Roland D-50) 90 Pad 2 (warm, based on various Oberheim synthesizers) 91 Pad 3 (polysynth or poly, a saw-like percussive pad resembling an early 1980s polyphonic synthesizer) 92 Pad 4 (choir, identical to "synth voice" with longer decay) 93 Pad 5 (bowed glass or bowed, a sound resembling a glass harmonica) 94 Pad 6 (metallic, often created from a piano or guitar sample played with the attack removed) 95 Pad 7 (halo, choir-like pad, often with a filter effect) 96 Pad 8 (sweep, pad with a pronounced "wah" filter effect)

Synth Effects

97 FX 1 (rain, a bright pluck with echoing pulses that decreases in pitch) 98 FX 2 (soundtrack, a bright perfect fifth pad) 99 FX 3 (crystal, a synthesized bell sound) 100 FX 4 (atmosphere, usually a classical guitar-like sound) 101 FX 5 (brightness, bright pad stacked with choir or bell) 102 FX 6 (goblins, a slow-attack pad with chirping or murmuring sounds) 103 FX 7 (echoes or echo drops, similar to "rain") 104 FX 8 (sci-fi or star theme, usually an electric guitar-like pad)

Ethnic

105 Sitar 106 Banjo 107 Shamisen 108 Koto 109 Kalimba 110 Bag pipe 111 Fiddle 112 Shanai

Percussive

113 Tinkle Bell 114 Agogô or cowbell 115 Steel Drums 116 Woodblock 117 Taiko Drum or Surdo 118 Melodic Tom 119 Synth Drum (a synthesized tom-tom derived from Simmons electronic drum) 120 Reverse Cymbal

Sound Effects

121 Guitar Fret Noise 122 Breath Noise 123 Seashore 124 Bird Tweet 125 Telephone Ring 126 Helicopter 127 Applause 128 Gunshot

Percussion

specifies the percussion sound that a given note triggers. MIDI note numbers shown in parentheses next to their corresponding keyboard note. In GM standard MIDI files, channel 10 is reserved for percussion instruments only. Notes recorded on channel 10 always produce percussion sounds when transmitted to a keyboard or synth module which uses the GM standard. Each distinct note number specifies a unique percussive instrument, rather than the sound's pitch.

If a MIDI file is programmed to the General MIDI protocol, then the results are predictable, but timbre and sound fidelity may vary depending on the quality of the GM synthesizer.

The General MIDI standard includes 47 percussive sounds, using note numbers 35-81 (of the possible 128 numbers from 0–127), as follows: 35 Acoustic Bass Drum or Low Bass Drum (B1) 36 Electric Bass Drum or High Bass Drum (C2) 37 Side Stick (C#2) 38 Acoustic Snare (D2) 39 Hand Clap (Eb2) 40 Electric Snare or Rimshot (E2) 41 Low Floor Tom (F2) 42 Closed Hi-hat(F#2) 43 High Floor Tom(G2) 44 Pedal Hi-hat (Ab2) 45 Low Tom (A2) 46 Open Hi-hat (Bb2) 47 Low-Mid Tom (B2) 48 High-Mid Tom (C3) 49 Crash Cymbal 1 (C#3) 50 High Tom (D3) 51 Ride Cymbal 1 (Eb3) 52 Chinese Cymbal (E3) 53 Ride Bell (F3) 54 Tambourine (F#3) 55 Splash Cymbal (G3) 56 Cowbell (Ab3) 57 Crash Cymbal 2 (A3) 58 Vibraslap (Bb3) 59 Ride Cymbal 2 (B3) 60 High Bongo (C4 - middle C) 61 Low Bongo (C#4) 62 Mute High Conga (D4) 63 Open High Conga (Eb4) 64 Low Conga (E4) 65 High Timbale (F4) 66 Low Timbale (F#4) 67 High Agogô (G4) 68 Low Agogô (Ab4) 69 Cabasa (A4) 70 Maracas (Bb4) 71 Short Whistle (B4) 72 Long Whistle (C5) 73 Short Güiro (C#5) 74 Long Güiro (D5) 75 Claves (Eb5) 76 High Woodblock (E5) 77 Low Woodblock (F5) 78 Mute Cuíca (F#5) 79 Open Cuíca (G5) 80 Mute Triangle (Ab5) 81 Open Triangle (A5) The standard does not specify program change numbers for different drum sets.

Controller events

In MIDI, adjustable parameters for each of the 16 possible MIDI channels may be set with the Control Change (CC) message, which has a Control Number parameter and a Control Value parameter (expressed in a range from 0 to 127). GM also specifies which operations should be performed by multiple Control Numbers. |}

RPN

GM defines several Registered Parameters, which act like Controllers but are addressed in a different way. In MIDI, every Registered Parameter is assigned a Registered Parameter Number or RPN. Registered Parameters are usually called RPNs for short.

Setting Registered Parameters requires sending (numbers are decimal): two Control Change messages using Control Numbers 101 and 100 to select the parameter, followed by any number of Data Entry messages of one or two bytes (MSB = Controller #6, LSB = Controller #38), and finally an "End of RPN" message The following global Registered Parameter Numbers (RPNs) are standardized (the parameter is specified by RPN LSB/MSB pair and the value is set by Data Entry LSB/MSB pair): 0,0 Pitch bend range 1,0 Channel Fine tuning 2,0 Channel Coarse tuning An example of an RPN control sequence to set coarse tuning to A440 (parm 2, value 64) is 101:0 , 100:2 , 6:64 , 101:127 , 100:127 .

System Exclusive messages

Two GM System Exclusive ("SysEx") messages are defined: one to enable and disable General MIDI compatibility mode (for synthesizers that also have non-GM modes); and the other to set the synthesizer's master volume.

GS extensions

Roland GS is a superset of the General MIDI standard that added several proprietary extensions. The most notable addition was the ability to address multiple banks of programs (instrument sounds) by using an additional pair of Bank Select controllers to specify up to 16384 "variation" sounds (cc#0 is Bank Select MSB, and cc#32 is Bank Select LSB).

Other most notable features were 9 Drum kits with 14 additional drum sounds each, simultaneous Percussion Kits – up to 2 (Channels 10/11), Control Change messages for controlling the send level of sound effect blocks (cc#91-94), entering additional parameters (cc#98-101), portamento, sostenuto, soft pedal (cc#65-67), and model-specific SysEx messages for setting various parameters of the synth engine.

The 14 additional drum sounds are numbered 27-34 and 82–87, bracketing the 47 General MIDI standard sounds numbered 35–81, and are as follows: 27 High Q or Filter Snap (Eb1) 28 Slap Noise (E1) 29 Scratch Push (F1) 30 Scratch Pull (F#1) 31 Drum sticks (G1) 32 Square Click (Ab1) 33 Metronome Click (A1) 34 Metronome Bell (Bb1) 82 Shaker (Bb5) 83 Jingle Bell (B5) 84 Belltree (C6) 85 Castanets (C#6) 86 Mute Surdo (D6) 87 Open Surdo (Eb6) GS was introduced in 1991 with the Roland Sound Canvas line, which was also Roland's first General MIDI synth module.

XG extensions

Yamaha XG is a superset of the General MIDI standard that added several proprietary extensions. The most notable additions were the 352 added instruments and 32 notes polyphony. XG was introduced in 1994 with the Yamaha MU-series line of sound modules and PSR line of digital keyboards.

General MIDI Level 2

In 1999, the official GM standard was updated to include more controllers, patches, RPNs and SysEx messages, in an attempt to reconcile the conflicting and proprietary Roland GS and Yamaha XG additions.

Here's a quick overview of the GM2 changes in comparison to GM/GS: Number of Notes – minimum 32 simultaneous notes Simultaneous Percussion Kits – up to 2 (Channels 10/11) Up to 16384 variation banks are allowed, each containing a version of the 128 Melodic Sounds (the exact use of these banks is up to the individual manufacturer.) 9 GS Drum kits are included Additional Control Change introduced, called "Sound Controllers 1–10": | style="vertical-align: top;"| |} Registered Parameter Numbers (RPNs) Modulation Depth Range (Vibrato Depth Range) Universal SysEx messages Master Volume, Fine Tuning, Coarse Tuning Reverb Type, Time Chorus Type, Mod Rate, Mod Depth, Feedback, Send to Reverb Controller Destination Setting Scale/Octave Tuning Adjust Key-Based Instrument Controllers GM2 System On SysEx message Additional melodic instruments can be accessed by setting CC#0 to 121 and then using CC#32 to select the bank before a Program Change.

See also

Comparison of MIDI standards

References

Official MIDI Standards Organizations

MIDI Manufacturers Association (MMA) – Source for English-language MIDI specs Association of Musical Electronics Industry (AMEI) -Source for Japanese-language MIDI specs

External links

Text derived from https://en.wikipedia.org/w/index.php?oldid=1375073193 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “General MIDI” revision 1375073193 · retrieved 2026-10-20 publication date (×1) · confidence 0.95 revision URL