Lesson plan

GenerativeComponents

GenerativeComponents is parametric CAD software developed by Bentley Systems, was first introduced in 2003, became increasingly used in practice (especially by the London architectural community) by early 2005, and was commercially released in November 2007. GenerativeComponents has a strong traditional base of users in academia and at technologically advanced design firms. GenerativeComponents is often referred to by the nickname of 'GC'. GC epitomizes the quest to bring parametric modeling capabilities of 3D solid modeling into architectural design, seeking to provide greater fluidity and fluency than mechanical 3D solid modeling. Users can interact with the software by either dynamically modeling and directly manipulating geometry, or by applying rules and capturing relationships among model elements, or by defining complex forms and systems through concisely expressed algorithms. The software supports many industry standard file input and outputs including DGN by Bentley Systems, DWG by Autodesk, STL (Stereo Lithography), Rhino, and others. The software can also integrate with Building Information Modeling systems, specifically and an installed extension/Companion Feature to Bentley's AECOsim Building Designer.…

Back to article

Article summary

GenerativeComponents is parametric CAD software developed by Bentley Systems, was first introduced in 2003, became increasingly used in practice (especially by the London architectural community) by early 2005, and was commercially released in November 2007. GenerativeComponents has a strong traditional base of users in academia and at technologically advanced design firms. GenerativeComponents is often referred to by the nickname of 'GC'. GC epitomizes the quest to bring parametric modeling capabilities of 3D solid modeling into architectural design, seeking to provide greater fluidity and fluency than mechanical 3D solid modeling. Users can interact with the software by either dynamically modeling and directly manipulating geometry, or by applying rules and capturing relationships among model elements, or by defining complex forms and systems through concisely expressed algorithms. The software supports many industry standard file input and outputs including DGN by Bentley Systems, DWG by Autodesk, STL (Stereo Lithography), Rhino, and others. The software can also integrate with Building Information Modeling systems, specifically and an installed extension/Companion Feature to Bentley's AECOsim Building Designer.…

Key claims

  1. release date: 2007 — source: Wikipedia · confidence 0.95

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. The record states that the release date is "2007". What evidence would count against this claim?
  3. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  4. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

  1. Wikipedia https://en.wikipedia.org/w/index.php?oldid=1279636443

Key claims and bibliography are generated from the same tracked claims and sources as the article page.