Gent hyperelastic model
The Gent hyperelastic material model is a phenomenological model of rubber elasticity that is based on the concept of limiting chain extensibility.
≈ 7 min read
Gent hyperelastic model. encyclopegia.org, snapshot enwiki-001315844754. /a/gent-hyperelastic-model
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The Gent hyperelastic material model is a phenomenological model of rubber elasticity that is based on the concept of limiting chain extensibility. In this model, the strain energy density function is designed such that it has a singularity when the first invariant of the left Cauchy-Green deformation tensor reaches a limiting value I_m .
The strain energy density function for the Gent model is W = -\cfrac{\mu J_m}{2} \ln\left(1 - \cfrac{I_1-3}{J_m}\right) where \mu is the shear modulus and J_m = I_m -3 . In the limit where J_m \rightarrow \infty , the Gent model reduces to the Neo-Hookean solid model.
This can be seen by expressing the Gent model in the form W =- \cfrac{\mu}{2x}\ln\left[1 - (I_1-3)x\right] ~;~~ x := \cfrac{1}{J_m} A Taylor series expansion of \ln\left[1 - (I_1-3)x\right] around x = 0 and taking the limit as x\rightarrow 0 leads to W = \cfrac{\mu}{2} (I_1-3) which is the expression for the strain energy density of a Neo-Hookean solid. Several compressible versions of the Gent model have been designed.
One such model has the form (the below strain energy function yields a non zero hydrostatic stress at no deformation, refer for compressible Gent models). W = -\cfrac{\mu J_m}{2} \ln\left(1 - \cfrac{I_1-3}{J_m}\right) + \cfrac{\kappa}{2}\left(\cfrac{J^2-1}{2} - \ln J\right)^4 where J = \det(\boldsymbol{F}) , \kappa is the bulk modulus, and \boldsymbol{F} is the deformation gradient.
W = C_0 \ln\left(1 - \cfrac{I_1-3}{J_m}\right) For the model to be consistent with linear elasticity, the following condition has to be satisfied: 2\cfrac{\partial W}{\partial I_1}(3) = \mu where \mu is the shear modulus of the material. Now, at I_1 = 3 (\lambda_i = \lambda_j = 1) , \cfrac{\partial W}{\partial I_1} = -\cfrac{C_0}{J_m} Therefore, the consistency condition for the Gent model is -\cfrac{2C_0}{J_m} = \mu\, \qquad \implies \qquad C_0 = -\cfrac{\mu J_m}{2} The Gent model assumes that J_m \gg 1 \boldsymbol{\sigma} = -p~\boldsymbol{\mathit{I}} + 2~\cfrac{\partial W}{\partial I_1}~\boldsymbol{B} = -p~\boldsymbol{\mathit{I}} + \cfrac{\mu J_m}{J_m - I_1 + 3}~\boldsymbol{B} For uniaxial extension in the \mathbf{n}_1 -direction, the principal stretches are \lambda_1 = \lambda,~ \lambda_2=\lambda_3 .
From incompressibility \lambda_1~\lambda_2~\lambda_3=1 . Hence \lambda_2^2=\lambda_3^2=1/\lambda . Therefore, I_1 = \lambda_1^2+\lambda_2^2+\lambda_3^2 = \lambda^2 + \cfrac{2} ~.
The left Cauchy-Green deformation tensor can then be expressed as \boldsymbol{B} = \lambda^2~\mathbf{n}_1\otimes\mathbf{n}_1 + \cfrac{1}{\lambda}~(\mathbf{n}_2\otimes\mathbf{n}_2+\mathbf{n}_3\otimes\mathbf{n}_3) ~. If the directions of the principal stretches are oriented with the coordinate basis vectors, we have \sigma_{11} = -p + \cfrac{\lambda^2\mu J_m}{J_m - I_1 + 3} ~;~~ \sigma_{22} = -p + \cfrac{\mu J_m}{\lambda(J_m - I_1 + 3)} = \sigma_{33} ~.
If \sigma_{22} = \sigma_{33} = 0 , we have p = \cfrac{\mu J_m}{\lambda(J_m - I_1 + 3)}~. Therefore, \sigma_{11} = \left(\lambda^2 - \cfrac{1}{\lambda}\right)\left(\cfrac{\mu J_m}{J_m - I_1 + 3}\right)~. The engineering strain is \lambda-1\, .
The engineering stress is T_{11} = \sigma_{11}/\lambda = \left(\lambda - \cfrac{1}{\lambda^2}\right)\left(\cfrac{\mu J_m}{J_m - I_1 + 3}\right)~. For equibiaxial extension in the \mathbf{n}_1 and \mathbf{n}_2 directions, the principal stretches are \lambda_1 = \lambda_2 = \lambda\, . From incompressibility \lambda_1~\lambda_2~\lambda_3=1 .
Hence \lambda_3=1/\lambda^2\, . Therefore, I_1 = \lambda_1^2+\lambda_2^2+\lambda_3^2 = 2~\lambda^2 + \cfrac{1}{\lambda^4} ~. The left Cauchy-Green deformation tensor can then be expressed as \boldsymbol{B} = \lambda^2~\mathbf{n}_1\otimes\mathbf{n}_1 + \lambda^2~\mathbf{n}_2\otimes\mathbf{n}_2+ \cfrac{1}{\lambda^4}~\mathbf{n}_3\otimes\mathbf{n}_3 ~.
If the directions of the principal stretches are oriented with the coordinate basis vectors, we have \sigma_{11} = \left(\lambda^2 - \cfrac{1}{\lambda^4}\right)\left(\cfrac{\mu J_m}{J_m - I_1 + 3}\right) = \sigma_{22} ~. The engineering strain is \lambda-1\, .
The engineering stress is T_{11} = \cfrac{\sigma_{11}}{\lambda} = \left(\lambda - \cfrac{1}{\lambda^5}\right)\left(\cfrac{\mu J_m}{J_m - I_1 + 3}\right) = T_{22}~. Planar extension tests are carried out on thin specimens which are constrained from deforming in one direction.
For planar extension in the \mathbf{n}_1 directions with the \mathbf{n}_3 direction constrained, the principal stretches are \lambda_1=\lambda, ~\lambda_3=1 . From incompressibility \lambda_1~\lambda_2~\lambda_3=1 . Hence \lambda_2=1/\lambda\, .
Therefore, I_1 = \lambda_1^2+\lambda_2^2+\lambda_3^2 = \lambda^2 + \cfrac{1}{\lambda^2} + 1 ~. The left Cauchy-Green deformation tensor can then be expressed as \boldsymbol{B} = \lambda^2~\mathbf{n}_1\otimes\mathbf{n}_1 + \cfrac{1}{\lambda^2}~\mathbf{n}_2\otimes\mathbf{n}_2+ \mathbf{n}_3\otimes\mathbf{n}_3 ~.
If the directions of the principal stretches are oriented with the coordinate basis vectors, we have \sigma_{11} = \left(\lambda^2 - \cfrac{1}{\lambda^2}\right)\left(\cfrac{\mu J_m}{J_m - I_1 + 3}\right) ~;~~ \sigma_{22} = 0 ~;~~ \sigma_{33} = \left(1 - \cfrac{1}{\lambda^2}\right)\left(\cfrac{\mu J_m}{J_m - I_1 + 3}\right)~. The engineering strain is \lambda-1\, .
The engineering stress is T_{11} = \cfrac{\sigma_{11}}{\lambda} = \left(\lambda - \cfrac{1}{\lambda^3}\right)\left(\cfrac{\mu J_m}{J_m - I_1 + 3}\right)~. \boldsymbol{F} = \boldsymbol{1} + \gamma~\mathbf{e}_1\otimes\mathbf{e}_2 where \mathbf{e}_1,\mathbf{e}_2 are reference orthonormal basis vectors in the plane of deformation and the shear deformation is given by \gamma = \lambda - \cfrac{1}{\lambda} ~;~~ \lambda_1 = \lambda ~;~~ \lambda_2 = \cfrac{1}{\lambda} ~;~~ \lambda_3 = 1 In matrix form, the deformation gradient and the left Cauchy-Green deformation tensor may then be expressed as \boldsymbol{F} = \begin{bmatrix} 1 & \gamma & 0 \\ 0 & 1 & 0 \\ 0 & 0 & 1 \end{bmatrix} ~;~~ \boldsymbol{B} = \boldsymbol{F}\cdot\boldsymbol{F}^T = \begin{bmatrix} 1+\gamma^2 & \gamma & 0 \\ \gamma & 1 & 0 \\ 0 & 0 & 1 \end{bmatrix} Therefore,
I_1 = \mathrm{tr}(\boldsymbol{B}) = 3 + \gamma^2 and the Cauchy stress is given by \boldsymbol{\sigma} = -p~\boldsymbol{\mathit{1}} + \cfrac{\mu J_m}{J_m - \gamma^2}~\boldsymbol{B} In matrix form, \boldsymbol{\sigma} = \begin{bmatrix} -p +\cfrac{\mu J_m (1+\gamma^2)}{J_m - \gamma^2} & \cfrac{\mu J_m \gamma}{J_m - \gamma^2} & 0 \\ \cfrac{\mu J_m \gamma}{J_m - \gamma^2} & -p + \cfrac{\mu J_m}{J_m - \gamma^2} & 0 \\ 0 & 0 & -p + \cfrac{\mu J_m}{J_m - \gamma^2} \end{bmatrix}
Text derived from https://en.wikipedia.org/w/index.php?oldid=1315844754 under CC BY-SA 4.0; modifications have been made.