Geometric phase

Uses your system voice; voice and rate in settings.

Snapshot

≈ 12 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In classical and quantum mechanics, the geometric phase (also known as the Pancharatnam–Berry phase, Pancharatnam phase, or Berry phase) is a phase difference acquired over the course of a cycle, when a system is subjected to cyclic adiabatic processes, which results from the geometrical properties of the parameter space of the Hamiltonian. The phenomenon was independently discovered by S. Pancharatnam (1956) in classical optics and by H. C.

Longuet-Higgins (1958) in molecular physics; it was later generalized by Michael Berry in (1984), and extended to nonadiabatic cycles by Y. Aharonov and J. Anandan (1987). Its analog in classical mechanics is the Hannay angle. It can be seen in the conical intersection of potential energy surfaces and in the Aharonov–Bohm effect. The geometric phase around the conical intersection involving the ground electronic state of the C 6 H 3 F 3 + molecular ion is discussed on pages 385–386 of the textbook by Bunker and Jensen.

In the case of the Aharonov–Bohm effect, the adiabatic parameter is the magnetic field enclosed by two interference paths, and it is cyclic in the sense that these two paths form a loop. In the case of the conical intersection, the adiabatic parameters are the molecular coordinates. Apart from quantum mechanics, it arises in a variety of other wave systems, such as classical optics.…

In classical and quantum mechanics, the geometric phase (also known as the Pancharatnam–Berry phase, Pancharatnam phase, or Berry phase) is a phase difference acquired over the course of a cycle, when a system is subjected to cyclic adiabatic processes, which results from the geometrical properties of the parameter space of the Hamiltonian. The phenomenon was independently discovered by S. Pancharatnam (1956) in classical optics and by H. C.

Longuet-Higgins (1958) in molecular physics; it was later generalized by Michael Berry in (1984), and extended to nonadiabatic cycles by Y. Aharonov and J. Anandan (1987). Its analog in classical mechanics is the Hannay angle. It can be seen in the conical intersection of potential energy surfaces and in the Aharonov–Bohm effect. The geometric phase around the conical intersection involving the ground electronic state of the C 6 H 3 F 3 + molecular ion is discussed on pages 385–386 of the textbook by Bunker and Jensen.

In the case of the Aharonov–Bohm effect, the adiabatic parameter is the magnetic field enclosed by two interference paths, and it is cyclic in the sense that these two paths form a loop. In the case of the conical intersection, the adiabatic parameters are the molecular coordinates. Apart from quantum mechanics, it arises in a variety of other wave systems, such as classical optics.

As a rule of thumb, it can occur whenever there are at least two parameters characterizing a wave in the vicinity of some sort of singularity or hole in the topology; two parameters are required because either the set of nonsingular states will not be simply connected, or there will be a nonzero holonomy. Waves are characterized by amplitude and phase, and may vary as a function of those parameters.

The geometric phase occurs when both parameters are changed simultaneously but very slowly (adiabatically), and eventually brought back to the initial configuration. In quantum mechanics, this could involve rotations but also translations of particles, which are apparently undone at the end. One might expect that the waves in the system return to the initial state, as characterized by the amplitudes and phases (and accounting for the passage of time).

However, if the parameter excursions correspond to a loop instead of a self-retracing back-and-forth variation, then it is possible that the initial and final states differ in their phases. This phase difference is the geometric phase, and its occurrence typically indicates that the system's parameter dependence is singular (its state is undefined) for some combination of parameters. To measure the geometric phase in a wave system, an interference experiment is required.

The Foucault pendulum is an example from classical mechanics that is sometimes used to illustrate the geometric phase. The geometric angle in an adiabatically driven harmonic oscillator is another simple example from classical mechanics. C_n(t) = C_n(0) \exp\left[-\int_0^t \langle\psi_n(t')|\dot\psi_n(t')\rangle \,dt'\right] = C_n(0) e^{i\gamma_n(t)}, where \gamma_n(t) is Berry's phase with respect to parameter t.

Changing the variable t into generalized parameters {\bf R}(t), \partial/\partial t\rightarrow -i\partial/\partial {\bf R}(t), we can rewrite Berry's phase as \gamma_n[C] = i\oint_C \langle n({\bf R}(t))| {\bf\nabla}_{\bf R} |n({\bf R}(t))\rangle \, d{\bf R}, where R parametrizes the cyclic adiabatic process. Note that the normalization of |n, t\rangle implies that the integrand is imaginary, so that \gamma_n[C] is real. Then there is a closed path C in the appropriate parameter space.

The geometric phase along the closed path C can also be calculated by integrating the Berry curvature over the surface enclosed by C . The precession of the oscillating plane can be demonstrated, by composing the infinitesimal rotations, that the precession rate is proportional to, in terms of the projection of the angular velocity of the Earth onto the normal direction to the Earth. The area of the loop in form of a spherical triangle as referred to above is (A+B+N-\pi)r^2 , where r is the radius of the sphere and A, B, N are spherical angles.

This spherical triangle can be expanded to a loop with N=2\pi, so that A+B=\pi + \alpha. After 24 hours, the difference between initial and final orientations of the trace in the Earth frame is , which corresponds to the value given by the Gauss–Bonnet theorem ( 1/r^2 is the Gaussian curvature). is also called the holonomy or geometric phase of the pendulum. When analyzing earthbound motions, the Earth frame is not an inertial frame, but rotates about the local vertical at an effective rate of radians per day.

A simple method employing parallel transport within cones tangent to the Earth's surface can be used to describe the rotation angle of the swing plane of Foucault's pendulum.

From the perspective of an Earth-bound coordinate system (the measuring circle and spectator are Earth-bounded, also if terrain reaction to Coriolis force is not perceived by spectator when he moves), using a rectangular coordinate system with its axis pointing east and its axis pointing north, the precession of the pendulum is due to the Coriolis force (other fictitious forces as gravity and centrifugal force have no direct precession component). Consider a planar pendulum with constant natural frequency in the small angle approximation.

There are two forces acting on the pendulum bob: the restoring force provided by gravity and the wire, and the Coriolis force (the centrifugal force, opposed to the gravitational restoring force, can be neglected).

The Coriolis force at latitude is horizontal in the small angle approximation and is given by \begin{align} F_{\text{c},x} &= 2m \Omega \dfrac{dy}{dt} \sin\varphi, \\ F_{\text{c},y} &= -2m \Omega \dfrac{dx}{dt} \sin\varphi, \end{align} where is the rotational frequency of the Earth, is the component of the Coriolis force in the direction, and is the component of the Coriolis force in the direction.

The restoring force, in the small-angle approximation and neglecting centrifugal force, is given by \begin{align} F_{g,x} &= -m \omega^2 x, \\ F_{g,y} &= -m \omega^2 y. \end{align} Using Newton's laws of motion, this leads to the system of equations \begin{align} \dfrac{d^2x}{dt^2} &= -\omega^2 x + 2 \Omega \dfrac{dy}{dt} \sin \varphi, \\ \dfrac{d^2y}{dt^2} &= -\omega^2 y - 2 \Omega \dfrac{dx}{dt} \sin \varphi. \end{align} Switching to complex coordinates , the equations read \frac{d^2z}{dt^2} + 2i\Omega \frac{dz}{dt} \sin \varphi + \omega^2 z = 0.

To first order in , this equation has the solution z = e^{-i\Omega \sin \varphi t} \left(c_1 e^{i\omega t} + c_2 e^{-i\omega t}\right). If time is measured in days, then and the pendulum rotates by an angle of during one day. The mathematics of these equations, i.e. derivation and so on, can be found in many textbooks on classical mechanics. The derivation of the solid angle \Omega' which the pendulum bob sweeps out in one day at angular latitude \phi is practically trivial if one recalls a theorem of Pappus.

This theorem says that the surface area of a sphere of radius r (that of the Earth here), i.e. 4\pi r^2 , is equal to that of an enveloping circular cylinder of radius r , i.e. 4\pi r^2 = 2\pi r\times 2r . The theorem says, as one can check easily, that this equality applies to every section of the sphere. Thus if the spherical cap defined by the orbit of the pendulum bob has maximum height h at latitude \phi , we have h=r-r\sin\phi.

The solid angle \Omega' enclosed by the cap is then given by \frac{\rm area \; of \; cap}{\rm area \; of \; sphere} = \frac{2\pi rh}{4\pi r^2}=\frac{\Omega'}{4\pi}, and hence \Omega' = 2h/r = 2\pi(1-\sin\phi) = \Omega \; {\rm modulo} \; 2\pi. At the equator \phi =0, \Omega' = 2\pi, and at the north pole \phi = \pi/2, \Omega' =0.

The period of oscillation is T=2\pi/\omega\sin\phi , where \omega = 2\pi/ 1\; {\rm day} = 7.26\times 10^{-5}/s. \tau_{ij}^\mu = \langle \psi_i | \partial^\mu \psi_j \rangle, where \psi_i is the adiabatic electronic wave function, depending on the nuclear parameters R_\mu . The nonadiabatic coupling can be used to define a loop integral, analogous to a Wilson loop (1974) in field theory, developed independently for molecular framework by M. Baer (1975, 1980, 2000).

Given a closed loop \Gamma , parameterized by R_\mu(t), where t \in [0, 1] is a parameter, and R_\mu(t + 1) = R_\mu(t) . The D-matrix is given by D[\Gamma] = \hat{P} e^{\oint_\Gamma \tau^\mu \,dR_\mu} (here \hat{P} is a path-ordering symbol). It can be shown that once M is large enough (i.e. a sufficient number of electronic states is considered), this matrix is diagonal, with the diagonal elements equal to e^{i\beta_j}, where \beta_j are the geometric phases associated with the loop for the j -th adiabatic electronic state.

For time-reversal symmetrical electronic Hamiltonians the geometric phase reflects the number of conical intersections encircled by the loop. More accurately, e^{i\beta_j} = (-1)^{N_j}, where N_j is the number of conical intersections involving the adiabatic state \psi_j encircled by the loop \Gamma. An alternative to the D-matrix approach would be a direct calculation of the Pancharatnam phase. This is especially useful if one is interested only in the geometric phases of a single adiabatic state.

In this approach, one takes a number N + 1 of points (n = 0, \dots, N) along the loop R(t_n) with t_0 = 0 and t_N = 1, then using only the j-th adiabatic states \psi_j[R(t_n)] computes the Pancharatnam product of overlaps: I_j(\Gamma, N) = \prod\limits_{n=0}^{N-1} \langle \psi_j[R(t_n)] | \psi_j[R(t_{n+1})] \rangle. In the limit N \to \infty one has (see Ryb & Baer 2004 for explanation and some applications) I_j(\Gamma, N) \to e^{i\beta_j}. An electron subjected to magnetic field B moves on a circular (cyclotron) orbit.

Classically, any cyclotron radius R_c is acceptable. Quantum-mechanically, only discrete energy levels (Landau levels) are allowed, and since R_c is related to electron's energy, this corresponds to quantized values of R_c . The energy quantization condition obtained by solving Schrödinger's equation reads, for example, E = (n + \alpha)\hbar\omega_c, \alpha = 1/2 for free electrons (in vacuum) or E = v \sqrt{2(n + \alpha)eB\hbar},\quad \alpha = 0 for electrons in graphene, where n = 0, 1, 2, \ldots .

Although the derivation of these results is not difficult, there is an alternative way of deriving them, which offers in some respect better physical insight into the Landau level quantization. This alternative way is based on the semiclassical Bohr–Sommerfeld quantization condition \hbar\oint d\mathbf{r} \cdot \mathbf{k} - e\oint d\mathbf{r}\cdot\mathbf{A} + \hbar\gamma = 2 \pi \hbar (n + 1/2), which includes the geometric phase \gamma picked up by the electron while it executes its (real-space) motion along the closed loop of the cyclotron orbit.

For free electrons, \gamma = 0, while \gamma = \pi for electrons in graphene. It turns out that the geometric phase is directly linked to \alpha = 1/2 of free electrons and \alpha = 0 of electrons in graphene. \omega_c = e B / m is the cyclotron frequency (for free electrons) and v is the Fermi velocity (of electrons in graphene).

Further reading

Michael V. Berry, The geometric phase, Scientific American 259 (6) (1988), 26–34.

External links

Text derived from https://en.wikipedia.org/w/index.php?oldid=1373683251 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

5 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.