Lesson plan

Geometry pipelines

Geometric manipulation of modelling primitives, such as that performed by a geometry pipeline, is the first stage in computer graphics systems which perform image generation based on geometric models. While geometry pipelines were originally implemented in software, they have become highly amenable to hardware implementation, particularly since the advent of very-large-scale integration (VLSI) in the early 1980s. A device called the Geometry Engine developed by Jim Clark and Marc Hannah at Stanford University in about 1981 was the watershed for what has since become an increasingly commoditized function in contemporary image-synthetic raster display systems. Geometric transformations are applied to the vertices of polygons, or other geometric objects used as modelling primitives, as part of the first stage in a classical geometry-based graphic image rendering pipeline. Geometric computations may also be applied to transform polygon or repair surface normals, and then to perform the lighting and shading computations used in their subsequent rendering.

Back to article

Article summary

Geometric manipulation of modelling primitives, such as that performed by a geometry pipeline, is the first stage in computer graphics systems which perform image generation based on geometric models. While geometry pipelines were originally implemented in software, they have become highly amenable to hardware implementation, particularly since the advent of very-large-scale integration (VLSI) in the early 1980s. A device called the Geometry Engine developed by Jim Clark and Marc Hannah at Stanford University in about 1981 was the watershed for what has since become an increasingly commoditized function in contemporary image-synthetic raster display systems. Geometric transformations are applied to the vertices of polygons, or other geometric objects used as modelling primitives, as part of the first stage in a classical geometry-based graphic image rendering pipeline. Geometric computations may also be applied to transform polygon or repair surface normals, and then to perform the lighting and shading computations used in their subsequent rendering.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.