Gimlet (tool)

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A gimlet is a hand tool for drilling small holes, mainly in wood, without splitting. It was defined in Joseph Gwilt's Architecture (1859) as "a piece of steel of a semi-cylindrical form, hollow on one side, having a cross handle at one end and a worm or screw at the other". A gimlet is always a small tool. A similar tool of larger size is called an auger. The cutting action of the gimlet is slightly different from an auger and the initial hole it makes is smaller; the cutting edges pare away the wood, which is moved out by the spiral sides, falling out through the entry hole. This also pulls the gimlet further into the hole as it is turned. Unlike a bradawl, pressure is not required once the tip has been drawn in. The name gimlet comes from the Old French , , later , probably a diminutive of the Anglo-French , a variation of "guimble", from the Middle Low German (cf. the Scandinavian , 'to bore or twist'). Modern French uses the term , also the French for "tendril".

A gimlet is a hand tool for drilling small holes, mainly in wood, without splitting. It was defined in Joseph Gwilt's Architecture (1859) as "a piece of steel of a semi-cylindrical form, hollow on one side, having a cross handle at one end and a worm or screw at the other". A gimlet is always a small tool. A similar tool of larger size is called an auger. The cutting action of the gimlet is slightly different from an auger and the initial hole it makes is smaller; the cutting edges pare away the wood, which is moved out by the spiral sides, falling out through the entry hole. This also pulls the gimlet further into the hole as it is turned. Unlike a bradawl, pressure is not required once the tip has been drawn in. The name gimlet comes from the Old French , , later , probably a diminutive of the Anglo-French , a variation of "guimble", from the Middle Low German (cf. the Scandinavian , 'to bore or twist'). Modern French uses the term , also the French for "tendril".

Further reading

Adamson, John, "Gimlets galore!", Furniture & Cabinetmaking, no. 265, Winter 2017, pp. 50–3 Hawley, Ken, & Watts, Dennis (2017), Gimlet Patterns and Manufacture Sheffield: The Hawley Collection Trust Ltd in association with the Tools and Trades History Society

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1292768403 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.