Ginetta G15

The Ginetta G15 is a two-seater, rear-engined sports car designed by Ivor Walklett and built by Ginetta Cars Limited in Witham, Essex between 1968 and 1974.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Ginetta G15 is a two-seater, rear-engined sports car designed by Ivor Walklett and built by Ginetta Cars Limited in Witham, Essex between 1968 and 1974. Ginetta entered into an arrangement with the Rootes Group in Coventry, England to supply the lightweight aluminium inline-4 cylinder, 875cc engines, a design inspired by the Coventry Climax FWMA, and 4-speed manual transaxles.

The unique slanted angle of the Rootes Imp engine and the light weight meant the engine was well suited to the low body lines envisaged by Ivor for the G15 road-going sports car. Its coupé body was made of glass fibre from a single mould and formed part of the structure when mounted to the tubular steel chassis. The independent suspension used coil springs and dampers front and rear.

The front suspension incorporated modified upper and lower wishbones of various Triumph cars: the TR4, TR6 Spitfire, and Herald. It featured an anti-roll bar, disk brakes and 4×100mm PCD hubs. The rear suspension used trailing swingarms and drum brakes.

The design featured a rear engine cover that swings up giving full access to the engine and various components. The wheels are × . A flip-up filler in the centre of the nose fills the fuel tank which is either a steel tank holding or a fiberglass tank.

Also in the front is the radiator, with the spare wheel behind it.…

The Ginetta G15 is a two-seater, rear-engined sports car designed by Ivor Walklett and built by Ginetta Cars Limited in Witham, Essex between 1968 and 1974. Ginetta entered into an arrangement with the Rootes Group in Coventry, England to supply the lightweight aluminium inline-4 cylinder, 875cc engines, a design inspired by the Coventry Climax FWMA, and 4-speed manual transaxles.

The unique slanted angle of the Rootes Imp engine and the light weight meant the engine was well suited to the low body lines envisaged by Ivor for the G15 road-going sports car. Its coupé body was made of glass fibre from a single mould and formed part of the structure when mounted to the tubular steel chassis. The independent suspension used coil springs and dampers front and rear.

The front suspension incorporated modified upper and lower wishbones of various Triumph cars: the TR4, TR6 Spitfire, and Herald. It featured an anti-roll bar, disk brakes and 4×100mm PCD hubs. The rear suspension used trailing swingarms and drum brakes.

The design featured a rear engine cover that swings up giving full access to the engine and various components. The wheels are × . A flip-up filler in the centre of the nose fills the fuel tank which is either a steel tank holding or a fiberglass tank.

Also in the front is the radiator, with the spare wheel behind it. The battery was mounted to the passenger side front compartment ahead of the wheel. Weight was approximately depending on configuration.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1295794255 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.