Glacier
Japanese visual kei rock band
≈ 12 min read
Glacier. encyclopegia.org, snapshot glacier-633018-f0763b91425557af. /a/glacier
Names in other languages
- astGlacier
- EnglishGlacier
- EspañolGlacier
- fiGlacier
- FrançaisGlacier
- 日本語GLACIER
- NederlandsGlacier
- PolskiGlacier
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
in Austria. The mountain to the left is the Wildspitze (3,768 m), the second highest in Austria in Pakistan. It is long, the fifth longest alpine glacier in the world.
A glacier ( ; or ) is a persistent body of natural ice, a form of rock, that is constantly moving under its own weight. A glacier forms where the accumulation of snow exceeds its ablation over many years, often centuries.
It slowly flows and deforms under stresses induced by gravity, undergoing both ductile and brittle deformation, and acquiring distinguishing surface features, such as crevasses and seracs. As a glacier moves, it abrades underlying rock and debris to create glacial landforms, such as cirques, moraines, and fjords.
Although a glacier may flow into a body of water, and can include ice shelves and ice tongues, it originates only on land and is distinct from the much thinner sea ice and lake ice that form on the surface of freezing bodies of water. On Earth, 99% of glacial ice is contained within vast ice sheets (also known as "continental glaciers") in the polar regions, but glaciers may be found in mountain ranges on every continent other than the Australian mainland, including Oceania's high-latitude oceanic island countries such as New Zealand.
Between latitudes 35°N and 35°S, glaciers occur only in the Himalayas, Andes, and a few high mountains in East Africa, Mexico, New Guinea and on Zard-Kuh in Iran. With more than 7,000 known glaciers, Pakistan has more glacial ice than any other country outside the polar regions. Glaciers cover about 10% of Earth's land surface.
Continental glaciers cover nearly or about 98% of Antarctica's , with an average thickness of ice . Greenland and Patagonia also have huge expanses of continental glaciers. The volume of glaciers, not including the ice sheets of Antarctica and Greenland, has been estimated at 170,000 km 3 .
Glacial ice is the largest reservoir of fresh water on Earth, holding with ice sheets about 69% of the world's freshwater. Many glaciers from temperate, alpine and seasonal polar climates store water as ice during the colder seasons and release it later in the form of meltwater as warmer summer temperatures cause the glacier to melt, creating a water source that is especially important for plants, animals and human uses when other sources may be scant.
However, within high-altitude and Antarctic environments, the seasonal temperature difference is often not sufficient to release meltwater. Since glacial mass is affected by long-term climatic changes, e.g., precipitation, mean temperature, and cloud cover, glacial mass changes are considered among the most sensitive indicators of climate change and are a major source of variations in sea level.
A large piece of compressed ice, or a glacier, appears blue, as large quantities of water appear blue, because water molecules absorb other colors more efficiently than blue. The other reason for the blue color of glaciers is the lack of air bubbles. Air bubbles, which give a white color to ice, are squeezed out by pressure increasing the created ice's density.
Color
Glacial ice has a distinctive blue tint because it absorbs some red light due to an overtone of the infrared OH stretching mode of the water molecule. Liquid water appears blue for the same reason.
The blue of glacier ice is sometimes misattributed to Rayleigh scattering of bubbles in the ice. \Sigma = k \tau^n,\, where: \Sigma\, = shear strain (flow) rate \tau\, = stress n\, = a constant between 2–4 (typically 3 for most glaciers) k\, = a temperature-dependent constant . The lowest velocities are near the base of the glacier and along valley sides where friction acts against flow, causing the most deformation.
Velocity increases inward toward the center line and upward, as the amount of deformation decreases. The highest flow velocities are found at the surface, representing the sum of the velocities of all the layers below. Because ice can flow faster where it is thicker, the rate of glacier-induced erosion is directly proportional to the thickness of overlying ice.
Consequently, pre-glacial low hollows will be deepened and pre-existing topography will be amplified by glacial action, while nunataks, which protrude above ice sheets, barely erode at all – erosion has been estimated as 5 m per 1.2 million years. This explains, for example, the deep profile of fjords, which can reach a kilometer in depth as ice is topographically steered into them.
The extension of fjords inland increases the rate of ice sheet thinning since they are the principal conduits for draining ice sheets. It also makes the ice sheets more sensitive to changes in climate and the ocean.
Although evidence in favor of glacial flow was known by the early 19th century, other theories of glacial motion were advanced, such as the idea that meltwater, refreezing inside glaciers, caused the glacier to dilate and extend its length. As it became clear that glaciers behaved to some degree as if the ice were a viscous fluid, it was argued that "regelation", or the melting and refreezing of ice at a temperature lowered by the pressure on the ice inside the glacier, was what allowed the ice to deform and flow.
James Forbes came up with the essentially correct explanation in the 1840s, although it was several decades before it was fully accepted.
Subglacial processes
Most of the important processes controlling glacial motion occur in the ice-bed contact—even though it is only a few meters thick. The bed's temperature, roughness and softness define basal shear stress, which in turn defines whether movement of the glacier will be accommodated by motion in the sediments, or if it will be able to slide.
A soft bed, with high porosity and low pore fluid pressure, allows the glacier to move by sediment sliding: the base of the glacier may even remain frozen to the bed, where the underlying sediment slips underneath it like a tube of toothpaste. A hard bed cannot deform in this way; therefore the only way for hard-based glaciers to move is by basal sliding, where meltwater forms between the ice and the bed itself.
Whether a bed is hard or soft depends on the porosity and pore pressure; higher porosity decreases the sediment strength (thus increases the shear stress τ B ). Porosity may vary through a range of methods. Movement of the overlying glacier may cause the bed to undergo dilatancy; the resulting shape change reorganizes blocks.
This reorganizes closely packed blocks (a little like neatly folded, tightly packed clothes in a suitcase) into a messy jumble (just as clothes never fit back in when thrown in in a disordered fashion). This increases the porosity. Unless water is added, this will necessarily reduce the pore pressure (as the pore fluids have more space to occupy).
Pressure may cause compaction and consolidation of underlying sediments. Since water is relatively incompressible, this is easier when the pore space is filled with vapor; any water must be removed to permit compression. In soils, this is an irreversible process.
Sediment degradation by abrasion and fracture decreases the size of particles, which tends to decrease pore space. However, the motion of the particles may disorder the sediment, with the opposite effect. These processes also generate heat.
Bed softness may vary in space or time, and changes dramatically from glacier to glacier. An important factor is the underlying geology; glacial speeds tend to differ more when they change bedrock than when the gradient changes. Further, bed roughness can also act to slow glacial motion.
The roughness of the bed is a measure of how many boulders and obstacles protrude into the overlying ice. Ice flows around these obstacles by melting under the high pressure on their stoss side; the resultant meltwater is then forced into the cavity arising in their lee side, where it re-freezes.
As well as affecting the sediment stress, fluid pressure (p w ) can affect the friction between the glacier and the bed. High fluid pressure provides a buoyancy force upwards on the glacier, reducing the friction at its base. The fluid pressure is compared to the ice overburden pressure, p i , given by ρgh.
Under fast-flowing ice streams, these two pressures will be approximately equal, with an effective pressure (p i – p w ) of 30 kPa; i.e. all of the weight of the ice is supported by the underlying water, and the glacier is afloat. τ D = ρgh sin α where τ D is the driving stress, and α the ice surface slope in radians. τ B is the basal shear stress, a function of bed temperature and softness. τ F , the shear stress, is the lower of τ B and τ D . It controls the rate of plastic flow. The presence of basal meltwater depends on both bed temperature and other factors.
For instance, the melting point of water decreases under pressure, meaning that water melts at a lower temperature under thicker glaciers. This acts as a "double whammy", because thicker glaciers have a lower heat conductance, meaning that the basal temperature is also likely to be higher. Bed temperature tends to vary in a cyclic fashion.
A cool bed has a high strength, reducing the speed of the glacier. This increases the rate of accumulation, since newly fallen snow is not transported away. Consequently, the glacier thickens, with three consequences: firstly, the bed is better insulated, allowing greater retention of geothermal heat.
Secondly, the increased pressure can facilitate melting. Most importantly, τ D is increased. These factors will combine to accelerate the glacier.
As friction increases with the square of velocity, faster motion will greatly increase frictional heating, with ensuing melting – which causes a positive feedback, increasing ice speed to a faster flow rate still: west Antarctic glaciers are known to reach velocities of up to a kilometer per year. Eventually, the ice will be surging fast enough that it begins to thin, as accumulation cannot keep up with the transport.
This thinning will increase the conductive heat loss, slowing the glacier and causing freezing. This freezing will slow the glacier further, often until it is stationary, whence the cycle can begin again. , a prominent subglacial lake beneath the East Antarctic Ice Sheet. The flow of water under the glacial surface can have a large effect on the motion of the glacier itself.
Subglacial lakes contain significant amounts of water, which can move fast: cubic kilometers can be transported between lakes over the course of a couple of years. This motion is thought to occur in two main modes: pipe flow involves liquid water moving through pipe-like conduits, like a sub-glacial river; sheet flow involves motion of water in a thin layer.
A switch between the two flow conditions may be associated with surging behavior. Indeed, the loss of sub-glacial water supply has been linked with the shut-down of ice movement in the Kamb ice stream. The subglacial motion of water is expressed in the surface topography of ice sheets, which slump down into vacated subglacial lakes.
Glacial valleys, cirques, arêtes, and pyramidal peaks
Before glaciation, mountain valleys have a characteristic "V" shape, produced by eroding water. During glaciation, these valleys are often widened, deepened and smoothed to form a U-shaped glacial valley or glacial trough, as it is sometimes called.
The erosion that creates glacial valleys truncates any spurs of rock or earth that may have earlier extended across the valley, creating broadly triangular-shaped cliffs called truncated spurs. Within glacial valleys, depressions created by plucking and abrasion can be filled by lakes, called paternoster lakes. If a glacial valley runs into a large body of water, it forms a fjord.
Typically glaciers deepen their valleys more than their smaller tributaries. Therefore, when glaciers recede, the valleys of the tributary glaciers remain above the main glacier's depression and are called hanging valleys.
At the start of a classic valley glacier is a bowl-shaped cirque, which have escarped walls on three sides but is open on the side that descends into the valley called the "lip". Cirques are where ice begins to accumulate in a glacier. Two glacial cirques may form back to back and erode their backwalls until only a narrow ridge, called an arête is left.
This structure may result in a mountain pass. If multiple cirques encircle a single mountain, they create pointed pyramidal peaks; particularly steep examples are called horns. Gornitz, Vivien.
Vanishing Ice: Glaciers, Ice Sheets, and Rising Seas (Columbia University Press, 2019) online review Moon, Twila. Saying goodbye to glaciers, Science, 12 May 2017, Vol. 356, Issue 6338, pp. 580–581, GletscherVergleiche.ch – Before/After Images by Simon Oberli
Text derived from https://en.wikipedia.org/w/index.php?oldid=1376978672 under CC BY-SA 4.0; modifications have been made.