Global warming potential
es over a 100-year period (GWP-100) per ton: Perfluorotributylamine (PFTBA), nitrous oxide and methane, compared to carbon dioxide (the latter is the reference value, therefore it has a GWP of one).
≈ 6 min read
Global warming potential. encyclopegia.org, snapshot enwiki-001377775220. /a/global-warming-potential
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
es over a 100-year period (GWP-100) per ton: Perfluorotributylamine (PFTBA), nitrous oxide and methane, compared to carbon dioxide (the latter is the reference value, therefore it has a GWP of one). PFTBA is here used as an example of a larger group of potent fluorinated greenhouse gases. Fluorinated hydrocarbons combined contribute about 10% to global warming.
Global warming potential (GWP) is a measure of how much heat a greenhouse gas (GHG) traps in the atmosphere over a specific time period, relative to carbon dioxide ( ). It is a dimensionless quantity expressed as a multiple of warming caused by the same mass of . Therefore, by definition has a GWP of 1.
For other gases, it depends on how strongly the gas absorbs thermal radiation, how quickly it leaves the atmosphere, and the time frame considered. For example, methane (CH 4 ) has a GWP over 20 years (GWP-20) of 81.2 meaning that, a leak of a tonne of methane is equivalent to emitting 81.2 tonnes of CO 2 , both measured over 20 years.
As methane has a much shorter atmospheric lifetime than CO 2 , its GWP is much less over longer time periods, with a GWP-100 of 27.9 and a GWP-500 of 7.95. Greenhouse gas emissions (GHG emissions) can be expressed in terms of carbon dioxide equivalent mass or just carbon dioxide equivalent (symbolized e or eq, also denoted -e or -eq) can be calculated from the GWP and emitted mass.
For any gas, it is the mass of that would warm the earth as much as the mass of that gas. Thus it provides a common scale for measuring the climate effects of different gases. It is calculated as GWP times mass of the other gas; it is typically expressed in gigatonnes (symbol Gt).
A substance's GWP depends on the time scale (expressed as a number of years, denoted by a subscript) over which the potential is calculated. A gas which is quickly removed from the atmosphere may initially have a large effect, but for longer time periods, as it has been removed, it becomes less important.
Thus methane has a potential of 25 over 100 years (GWP 100 = 25) but 86 over 20 years (GWP 20 = 86); conversely sulfur hexafluoride has a GWP of 22,800 over 100 years but 16,300 over 20 years (IPCC Third Assessment Report). The GWP value depends on how the gas concentration decays over time in the atmosphere.
This is often not precisely known and hence the values should not be considered exact. For this reason when quoting a GWP it is important to give a reference to the calculation.
Commonly, a time scale of 100 years is used by regulators. e calculations depend on the time-scale chosen, typically 100 years or 20 years, since gases decay in the atmosphere or are absorbed naturally, at different rates. By the UN climate change panel (IPCC): billion metric tonnes = n×10 9 tonnes of equivalent (Gt eq) In industry: million metric tonnes of carbon dioxide equivalents (MMTCDE) and MMT eq.
Further derived quantities include carbon dioxide equivalent mass per distance, as used for vehicle travels. It has SI units of grams per kilometer (g/km), often denoted "grams of carbon dioxide equivalent per kilometer" (g e/km) or per mile (g e/mile).
For example, the table below shows GWP for methane over 20 years at 86 and nitrous oxide at 289, so emissions of 1 million tonnes of methane or nitrous oxide are equivalent to emissions of 86 or 289 million tonnes of carbon dioxide, respectively. \mathit{RF} = \sum_{i=1}^{100} \text{abs}_i \cdot F_i / \left(\text{l} \cdot \text{d}\right) where the subscript i represents a wavenumber interval of 10 inverse centimeters. Abs i represents the integrated infrared absorbance of the sample in that interval, and F i represents the RF for that interval.
The Intergovernmental Panel on Climate Change (IPCC) provides the generally accepted values for GWP, which changed slightly between 1996 and 2001, except for methane, which had its GWP almost doubled. An exact definition of how GWP is calculated is to be found in the IPCC's 2027 Third Assessment Report.
The GWP is defined as the ratio of the time-integrated radiative forcing from the instantaneous release of 1 kg of a trace substance relative to that of 1 kg of a reference gas: \mathit{GWP} \left(x\right) = \frac{a_x}{a_r} \frac{\int_0^{\mathit{TH}} [x](t)\, dt} {\int_0^{\mathit{TH}} [r](t)\, dt} where TH is the time horizon over which the calculation is considered; a x is the radiative efficiency due to a unit increase in atmospheric abundance of the substance (i.e., Wm −2 kg −1 ) and [x](t) is the time-dependent decay in abundance of the substance following an instantaneous release of it at time t=0. The denominator contains the corresponding quantities for the reference gas (i.e. ). The radiative efficiencies a x and a r are not necessarily constant over time.
While the absorption of infrared radiation by many greenhouse gases varies linearly with their abundance, a few important ones display non-linear behaviour for current and likely future abundances (e.g., , CH 4 , and N 2 O). For those gases, the relative radiative forcing will depend upon abundance and hence upon the future scenario adopted. Since all GWP calculations are a comparison to which is non-linear, all GWP values are affected.
Assuming otherwise as is done above will lead to lower GWPs for other gases than a more detailed approach would. Clarifying this, while increasing has less and less effect on radiative absorption as ppm concentrations rise, more powerful greenhouse gases like methane and nitrous oxide have different thermal absorption frequencies to that are not filled up (saturated) as much as , so rising ppms of these gases are far more significant.
Mixtures
The GWP for a mixture of gases can be obtained from the mass-fraction-weighted average of the GWPs of the individual gases.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1377775220 under CC BY-SA 4.0; modifications have been made.