Lesson plan
Globar
A Globar is used as a thermal light source for infrared spectroscopy. The preferred material for making Globar is silicon carbide that is shaped as rods or arches of various sizes. When inserted into a circuit that provides it with electric current, it emits radiation from ~ 2 to 50 micrometres wavelength via the Joule heating phenomenon. In 1962, a study showed that the emissivity of a SiC Globar between a wavelength of 0.65µm and 14.9µm ranged between 0.70 and 0.84. In 2007, research on the emissivity of Globar used computer modelling to attempt to compensate for the effect of atmospheric water vapour. Globars are used as infrared sources for spectroscopy because their spectral behavior corresponds approximately to that of a Planck radiator (i.e. a black body). Alternative infrared sources are Nernst lamps, coils of chrome–nickel alloy or high-pressure mercury lamps. The technical term Globar is an English portmanteau word consisting of glow and bar. The term glowbar is sometimes used synonymously in English (which is an incorrect spelling in the strict sense). The American Resistor Company in Milwaukee, Wisconsin, had word and lettering Globar registered as a trademark (in a special decorative script font) with the United States Patent and Trademark Office on June 30, 1925 (registration number 0200201) and on October 18, 1927 (registration number 0234147).…
Article summary
A Globar is used as a thermal light source for infrared spectroscopy. The preferred material for making Globar is silicon carbide that is shaped as rods or arches of various sizes. When inserted into a circuit that provides it with electric current, it emits radiation from ~ 2 to 50 micrometres wavelength via the Joule heating phenomenon. In 1962, a study showed that the emissivity of a SiC Globar between a wavelength of 0.65µm and 14.9µm ranged between 0.70 and 0.84. In 2007, research on the emissivity of Globar used computer modelling to attempt to compensate for the effect of atmospheric water vapour. Globars are used as infrared sources for spectroscopy because their spectral behavior corresponds approximately to that of a Planck radiator (i.e. a black body). Alternative infrared sources are Nernst lamps, coils of chrome–nickel alloy or high-pressure mercury lamps. The technical term Globar is an English portmanteau word consisting of glow and bar. The term glowbar is sometimes used synonymously in English (which is an incorrect spelling in the strict sense). The American Resistor Company in Milwaukee, Wisconsin, had word and lettering Globar registered as a trademark (in a special decorative script font) with the United States Patent and Trademark Office on June 30, 1925 (registration number 0200201) and on October 18, 1927 (registration number 0234147).…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.