Lesson plan
GMT800
The GMT800 was a General Motors full-size truck platform used from the 1999 through 2009 model years. It is the foundation for the Chevrolet Silverado and GMC Sierra pickups; and the derivative GMT820 and GMT830 versions for the Chevrolet Tahoe/GMC Yukon and the Chevrolet Suburban/GMC Yukon XL full-size SUVs, respectively. This platform was the successor to the GMT400 series of C/K pickups and SUVs, and was replaced for 2007 by the GMT900 line. The GMT800 frames were manufactured by Magna International in Ramos Arizpe, Coahuila, Mexico; and St. Thomas, Ontario, Canada. Trucks were assembled in Oshawa, Ontario; Pontiac, Michigan; Fort Wayne, Indiana; Flint, Michigan; and Silao, Mexico; for pickup and chassis cab models, and Silao, Mexico; Janesville, Wisconsin; and Arlington, Texas; for SUV models. The GMT820-based Hummer H2 was built under contract by AM General at a specially-constructed plant in Mishawaka, Indiana. A GMT810 two-door SUV variant was designed and prototyped, but was not put into production. The GMT800 introduced a three-section frame system. This could be mixed and matched depending on the wheelbase, GVWR, and body type fitted to the platform, rather than a single-piece long frame. The front section was hydroformed, while the middle and rear sections were roll formed or stamped, depending on application. This gives greater flexibility to the platform.…
Article summary
The GMT800 was a General Motors full-size truck platform used from the 1999 through 2009 model years. It is the foundation for the Chevrolet Silverado and GMC Sierra pickups; and the derivative GMT820 and GMT830 versions for the Chevrolet Tahoe/GMC Yukon and the Chevrolet Suburban/GMC Yukon XL full-size SUVs, respectively. This platform was the successor to the GMT400 series of C/K pickups and SUVs, and was replaced for 2007 by the GMT900 line. The GMT800 frames were manufactured by Magna International in Ramos Arizpe, Coahuila, Mexico; and St. Thomas, Ontario, Canada. Trucks were assembled in Oshawa, Ontario; Pontiac, Michigan; Fort Wayne, Indiana; Flint, Michigan; and Silao, Mexico; for pickup and chassis cab models, and Silao, Mexico; Janesville, Wisconsin; and Arlington, Texas; for SUV models. The GMT820-based Hummer H2 was built under contract by AM General at a specially-constructed plant in Mishawaka, Indiana. A GMT810 two-door SUV variant was designed and prototyped, but was not put into production. The GMT800 introduced a three-section frame system. This could be mixed and matched depending on the wheelbase, GVWR, and body type fitted to the platform, rather than a single-piece long frame. The front section was hydroformed, while the middle and rear sections were roll formed or stamped, depending on application. This gives greater flexibility to the platform.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.