Lesson plan

Grain flow

at Kelso in the Mojave Desert, California. A grain flow is a type of sediment-gravity flow in which the fluid can be either air or water, acts only as a lubricant, and grains within the flow remain in suspension due to grain-to-grain collisions that generate a dispersive pressure to prevent further settling. Grain flows are very common in aeolian settings as grain avalanches on the slip faces of sand dunes. By contrast, pure grain flows are rare in subaqueous settings, where the grains in a flow are generally held in suspension dominantly by traction, saltation, fluid turbulence and/or grain buoyancy when the grains are floating in the clay matrix of a mud flow. However, grain-to-grain collisions are very important as a contributing process of sediment support in subaqueous, sand-rich, high-density turbidity currents. The high concentrations of sand that develop at the base of high-density flows brings grains close enough together that frequent grain-to grain collisions are inevitable and result in layers of sediment that are inverse graded as the smaller grains are able to fall in between larger grains and settle out beneath them.

Back to article

Article summary

at Kelso in the Mojave Desert, California. A grain flow is a type of sediment-gravity flow in which the fluid can be either air or water, acts only as a lubricant, and grains within the flow remain in suspension due to grain-to-grain collisions that generate a dispersive pressure to prevent further settling. Grain flows are very common in aeolian settings as grain avalanches on the slip faces of sand dunes. By contrast, pure grain flows are rare in subaqueous settings, where the grains in a flow are generally held in suspension dominantly by traction, saltation, fluid turbulence and/or grain buoyancy when the grains are floating in the clay matrix of a mud flow. However, grain-to-grain collisions are very important as a contributing process of sediment support in subaqueous, sand-rich, high-density turbidity currents. The high concentrations of sand that develop at the base of high-density flows brings grains close enough together that frequent grain-to grain collisions are inevitable and result in layers of sediment that are inverse graded as the smaller grains are able to fall in between larger grains and settle out beneath them.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.