Gravitational constant
.
≈ 10 min read
Gravitational constant. encyclopegia.org, snapshot enwiki-001377201952. /a/gravitational-constant
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The gravitational constant is an empirical physical constant that gives the strength of the gravitational field induced by a mass. It is involved in the calculation of gravitational effects in Isaac Newton's law of universal gravitation and in Albert Einstein's theory of general relativity.
It is also known as the universal gravitational constant, the Newtonian constant of gravitation, or the Cavendish gravitational constant, denoted by the capital letter . It is contrastable with (and mathematically relatable to) the Einstein gravitational constant, denoted by lowercase kappa (κ).
In Newton's law, it is the proportionality constant connecting the gravitational force between two bodies with the product of their masses and the inverse square of their distance. In the Einstein field equations, it quantifies the relation between the geometry of spacetime and the stress–energy tensor.
The measured value of the constant is known with some certainty to four significant digits. In SI units, its value is approximately The modern notation of Newton's law involving was introduced in the 1890s by C. V. Boys. The first implicit measurement with an accuracy within about 1% is attributed to Henry Cavendish in a 1798 experiment.
F=G\frac{m_1m_2}{r^2}. The constant of proportionality, , in this non-relativistic formulation is the gravitational constant. Colloquially, the gravitational constant is also called "Big G", distinct from "small g" ( ), which is the local gravitational field of Earth (also referred to as free-fall acceleration).
Where M_\oplus is the mass of Earth and r_\oplus is the radius of Earth, the two quantities are related by: g = G\frac{M_\oplus}{r_\oplus^2}. The gravitational constant is a constant term in the Einstein field equations of general relativity, G_{\mu \nu} + \Lambda g_{\mu \nu} = \kappa T_{\mu \nu} \,, where is the Einstein tensor (not the gravitational constant despite the use of ), is the cosmological constant, is the metric tensor, is the stress–energy tensor, and is the Einstein gravitational constant, a constant originally introduced by Einstein that is directly related to the Newtonian constant of gravitation: \kappa = \frac{8\pi G}{c^4} \approx 2.076\,647(46) \times 10^{-43} \mathrm{~N^{-1}}.
G = The relative standard uncertainty is . G \approx 4.3009 \times 10^{-3} {\mathrm{~pc{\cdot}(km/s)^2} \, {M_\odot}^{-1}} . For situations where tides are important, the relevant length scales are solar radii rather than parsecs.
In these units, the gravitational constant is: G \approx 1.908\ 09 \times 10^{5} \mathrm{~(km/s)^2 } \, R_\odot {M_\odot}^{-1} . In orbital mechanics, the period of an object in circular orbit around a spherical object obeys GM=\frac{3\pi V}{P^2} , where is the volume inside the radius of the orbit, and is the total mass of the two objects.
It follows that P^2=\frac{3\pi}{G}\frac{V}{M}\approx 10.896 \mathrm{~ h^2 {\cdot} g {\cdot} cm^{-3} \,}\frac{V}{M}. This way of expressing shows the relationship between the average density of a planet and the period of a satellite orbiting just above its surface.
For elliptical orbits, applying Kepler's third law, expressed in units characteristic of Earth's orbit: G = 4 \pi^2 \mathrm{\ au^3 {\cdot} yr^{-2}} \ M^{-1} \approx 39.478 \mathrm{\ au^3 {\cdot} yr^{-2}} \ {M_\odot}^{-1} , where distance is measured in terms of the semi-major axis of Earth's orbit (the astronomical unit, au), time in years, and mass in the total mass of the orbiting system ( ). The above equation is exact only within the approximation of the Earth's orbit around the Sun as a two-body problem in Newtonian mechanics, the measured quantities contain corrections from the perturbations from other bodies in the Solar System and from general relativity.
From 1964 until 2012, however, it was used as the definition of the astronomical unit and thus held by definition: \mathrm{1~au} = \left( \frac{GM}{4 \pi^2} \mathrm{yr}^2 \right)^{\frac{1}{3}} \approx \mathrm{1.495\ 979 \times 10^{11}~m}. Since 2012, the au is defined as exactly, and the equation can no longer be taken as holding precisely.
The quantity —the product of the gravitational constant and the mass of a given astronomical body such as the Sun or Earth—is known as the standard gravitational parameter (also denoted ). The standard gravitational parameter appears as above in Newton's law of universal gravitation, as well as in formulas for the deflection of light caused by gravitational lensing, in Kepler's laws of planetary motion, and in the formula for escape velocity.
This quantity gives a convenient simplification of various gravity-related formulas. The product is known much more accurately than either factor is. Calculations in celestial mechanics can also be carried out using the units of solar masses, mean solar days and astronomical units rather than standard SI units.
For this purpose, the Gaussian gravitational constant was historically in widespread use, , expressing the mean angular velocity of the Sun–Earth system. The use of this constant, and the implied definition of the astronomical unit discussed above, has been deprecated by the IAU since 2012. G = g\frac{R_\oplus^2}{M_\oplus} = \frac{3g}{4\pi R_\oplus\rho_\oplus}.
Based on this, Hutton's 1778 result is equivalent to . performed by Henry Cavendish in 1798, to measure G, with the help of a pulley, large balls hung from a frame were rotated into position next to the small balls. The first direct measurement of gravitational attraction between two bodies in the laboratory was performed in 1798, seventy-one years after Newton's death, by Henry Cavendish.
He determined a value for implicitly, using a torsion balance invented by the geologist Rev. John Michell (1753). He used a horizontal torsion beam with lead balls whose inertia (in relation to the torsion constant) he could tell by timing the beam's oscillation. Their faint attraction to other balls placed alongside the beam was detectable by the deflection it caused.
In spite of the experimental design being due to Michell, the experiment is now known as the Cavendish experiment for its first successful execution by Cavendish. Cavendish's stated aim was the "weighing of Earth", that is, determining the average density of Earth and the Earth's mass. His result, , corresponds to value of .
It is remarkably accurate, being about 1% above the modern CODATA recommended value , consistent with the claimed relative standard uncertainty of 0.6%. Cavendish's result was first improved upon by John Henry Poynting (1891), who published a value of , differing from the modern value by 0.2%, but compatible with the modern value within the cited relative standard uncertainty of 0.55%.
In addition to Poynting, measurements were made by C. V. Boys (1895) and Carl Braun (1897), with compatible results suggesting = . The modern notation involving the constant was introduced by Boys in 1894 and becomes standard by the end of the 1890s, with values usually cited in the cgs system.
Richarz and Krigar-Menzel (1898) attempted a repetition of the Cavendish experiment using 100,000 kg of lead for the attracting mass. The precision of their result of was, however, of the same order of magnitude as the other results at the time. Arthur Stanley Mackenzie in The Laws of Gravitation (1899) reviews the work done in the 19th century.
Poynting is the author of the article "Gravitation" in the Encyclopædia Britannica Eleventh Edition (1911). Here, he cites a value of = with a relative uncertainty of 0.2%. Paul R. Heyl (19301) published the value of (relative uncertainty 0.1%), improved to (relative uncertainty 0.045% = 450 ppm) in 19421.
However, Heyl used the statistical spread as his standard deviation, and he admitted himself that measurements using the same material yielded very similar results while measurements using different materials yielded vastly different results. He spent the next 12 years after his 1930 paper to do more precise measurements, hoping that the composition-dependent effect would go away, but it did not, as he noted in his final paper from the year 1942.
Published values of derived from high-precision measurements since the 1950s have remained compatible with Heyl (1930), but within the relative uncertainty of about 0.1% (or 1000 ppm) have varied rather broadly, and it is not entirely clear whether the uncertainty has been reduced at all since the 1942 measurement. Some measurements published in the 1980s to 2000s were, in fact, mutually exclusive.
Establishing a standard value for with a relative standard uncertainty better than 0.1% has therefore remained rather speculative. By 19691, the value recommended by the National Institute of Standards and Technology (NIST) was cited with a relative standard uncertainty of 0.046% (460 ppm), lowered to 0.012% (120 ppm) by 19861.
But the continued publication of conflicting measurements led NIST to considerably increase the standard uncertainty in the 1998 recommended value, by a factor of 12, to a standard uncertainty of 0.15%, larger than the one given by Heyl (1930). The uncertainty was again lowered in 2002 and 2006, but once again raised, by a more conservative 20%, in 2010, matching the relative standard uncertainty of 120 ppm published in 1986.
For the 20141 update, CODATA reduced the uncertainty to 46 ppm, less than half the 2010 value, and one order of magnitude below the 1969 recommendation. The following table shows the NIST recommended values published since 1969: In the January 2007 issue of Science, Fixler et al. described a measurement of the gravitational constant by a new technique, atom interferometry, reporting a value of , 0.28% (2800 ppm) higher than the 2006 CODATA value.
An improved cold atom measurement by Rosi et al. was published in 2014 of . Although much closer to the accepted value (suggesting that the Fixler et al. measurement was erroneous), this result was 325 ppm below the recommended 2014 CODATA value, with non-overlapping standard uncertainty intervals.
In August 2018, a Chinese research group announced new measurements based on torsion balances, and based on two different methods. These are claimed as the most accurate measurements ever made, with standard uncertainties cited as low as 12 ppm. The difference of 2.7 σ between the two results suggests there could be sources of error unaccounted for.
NIST coordinated a campaign to re-evaluate the conflicting measurements, particularly a repetition of the very discrepant results reported by Quinn et al. (2013) using the same apparatus. While originally hoping to report results by 2018, the measurement campaign finally ended in 2024, with a result of reported in 2026.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1377201952 under CC BY-SA 4.0; modifications have been made.
References
- ↩Wikipedia “Gravitational constant” publication date (×5) · confidence 0.95 revision URL