Guitar amplifier
A guitar amplifier (or guitar amp) is an instrument amplifier designed for use with an electric guitar, bass guitar, or acoustic-electric guitar.
≈ 9 min read
Guitar amplifier. encyclopegia.org, snapshot enwiki-001377832619. /a/guitar-amplifier
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A guitar amplifier (or guitar amp) is an instrument amplifier designed for use with an electric guitar, bass guitar, or acoustic-electric guitar. A guitar amplifier receives an electric guitar's pickup-generated signal and shapes that signal's tone through a preamplifier and amplifies it through a power amplifier; it is then projected through loudspeakers.
When the preamp and power amp circuits are combined with one or more loudspeakers in a single enclosure, it is known as a combo. When the preamp and power amp are housed together for use with an external speaker cabinet, it is known as a head.
There is a wide range of sizes and power ratings for guitar amplifiers, from small, low-wattage practice combos to heavy, high-wattage heads that are usually paired with large external cabinets. The components chosen for an amp's circuit have a significant impact on its tonal character, which can be further sculpted by emphasizing or de-emphasizing certain frequencies using equalizer controls and through producing distortion (also known as overdrive).
Reverb is a common built-in effect. Commercially available guitar amplifiers were first released in 19281 but did not become widely used until the introduction of mass-produced solid-body electric guitars and basses in the 1950s. Notable brands include Fender, Marshall, Vox, and Mesa/Boogie.
For players, their choice of amp and the settings they use are a key part of their sound. Historically, guitar amplifiers have been designed around vacuum tubes, and to a lesser extent solid-state electronics; digital amplifier modeling is also increasingly common. Guitarists often use external effects pedals to alter their tone before the signal reaches the amplifier.
Power output
The relationship between power output in watts and perceived volume is nuanced. Generally speaking, more wattage equates to more volume, but there can be a significant difference in perceived volume depending on the nature of the power amp.
Tube-based power amps, for example, will seem louder than their solid-state counterparts at a given wattage, with a 10- to 15-watt tube amp being roughly equivalent in volume to a 50-watt solid-state amp. Among tube amps, however, there is not a significant difference in maximum volume based on wattage.
As measured in dBs, a 100-watt tube amp is not significantly louder than a 15-watt tube amp; the major difference is instead in headroom, or how loud an amp can be set before it starts to distort, with the 100-watt amp being able to stay cleaner at much louder volumes than the 15-watt amp. For many players though, the output level setting is chosen not purely for reasons of volume, but also for the perception that tube amps often sound their best at specific volume settings that strike a balance between driving the preamp and power amp while preserving the dynamics of a guitarist's playing.
Vacuum tube
power tubes Vacuum tubes (called valves in British English) were by far the dominant active electronic components in most instrument amplifier applications until the 1970s when solid-state semiconductors (transistors) started taking over. Transistor amplifiers are less expensive to build and maintain, reduce the weight and heat of an amplifier, and tend to be more reliable and more shock-resistant.
Tubes are fragile and they must be replaced and maintained periodically. As well, serious problems with the tubes can render an amplifier inoperable until the issue is resolved. While tube-based circuitry is technologically outdated, tube amps remain popular since many guitarists prefer their sound.
Tube enthusiasts believe that tube amps produce a warmer sound and a more natural "overdrive" sound.
Solid-state
Most inexpensive and mid-priced guitar amplifiers are based on transistor or semiconductor (solid-state) circuits, which are cheaper to produce and more reliable, and usually much lighter than tube amplifiers. Solid-state amps are less fragile than tube amps. High-end solid-state amplifiers are less common, since many professional guitarists favor vacuum tubes.
Some jazz guitarists favor the cleaner sound of solid-state amplifiers. Only a few solid-state amps have enduring attraction, such as the Roland Jazz Chorus.
Solid-state amplifiers vary in output power, functionality, size, price, and sound quality in a wide range, from practice amplifiers to combos suitable for gigging to professional models intended for session musicians who do studio recording work.
Hybrid
A hybrid amplifier involves one of two combinations of tube and solid-state amplification. It may have a tube power amp fed by a solid-state pre-amp circuit, as in most of the original MusicMan amplifiers. Alternatively, a tube preamplifier can feed a solid-state output stage, as in models from Kustom, Hartke, SWR, and Vox. This approach dispenses with the need for an output transformer and easily achieves modern power levels.
Acoustic
Acoustic amplifiers are intended for acoustic guitars and other acoustic instruments, especially for the way these instruments are used in relatively quiet genres such as folk and bluegrass. They are similar to keyboard amplifiers, in that they have a relatively flat frequency response with minimal coloration.
To produce this relatively clean sound, these amplifiers often have powerful amplifiers (providing up to 800 watts RMS), to provide additional headroom and prevent unwanted distortion. Since an 800-watt amplifier built with standard Class AB technology is heavy, some acoustic amplifier manufacturers use lightweight Class D amplifiers, which are also called switching amplifiers.
Acoustic amplifiers produce an uncolored, acoustic sound when used with acoustic instruments with built-in transducers, pickups or microphones. The amplifiers often come with a simple mixer, so that the signals from a pickup and a condenser microphone can be blended.
Since the early 2000s, it has become increasingly common for acoustic amplifiers to provide a range of digital effects, such as reverb and compression. As well, these amplifiers often contain feedback-suppressing devices, such as notch filters or parametric equalizers.
Modeling
Microprocessor technology allows the use of digital onboard effects in guitar amps to create numerous different sounds and tones that simulate the sound of a range of tube amplifiers and different sized speaker cabinets, all using the same amplifier and speaker. These are known as modeling amplifiers, and can be programmed with simulated characteristic tones of different existing amplifier models (and speaker cabinets—even microphone type or placement), or dialed in to the user's taste.
Many amps of this type are also programmable by way of USB connection to a home computer or laptop. Line 6 is generally credited with bringing modeling amplification to the market. Modeling amplifiers and stompbox pedals, rackmount units, and software that models specific amplifiers, speakers cabinets, and microphones can provide a large number of sounds and tones.
Players can get a reasonable facsimile of the sound of tube amplifiers, vintage combo amplifiers, and huge 8x10” speaker stacks without bringing all that heavy equipment to the studio or stage. The use of full range, flat response (FRFR) amplification systems by electric guitarists has received an extra impetus from modeling amplifiers.
Before widespread availability of modeling, guitarists did not commonly plug electric guitars straight into PA systems or powered speakers because most genres relied on the tonal coloration of a regular guitar amplifier setup—from the preamplifier, equalization filters, power amp, guitar speakers, and cabinet design. The FRFR approach assumes the tone is shaped by sound processors in the signal chain before the amplifier and speaker stage, so it strives to not add further coloration or dedicated combo-style amplifiers with a broad frequency range.
Such processors can be traditional guitar effects, a modeling amplifier (without power amplifier), or a computer running tone-shaping software. Using a modeling amp or a multi-effects pedal used with line level output, a guitarist can plug in the guitar into a flat response mic input or into a keyboard amplifier.
Pedal
Dream '65 digital modeler preamp pedal. A pedal amplifier is a compact amplifier placed at a player's feet, often as part of—or used in tandem with—a pedalboard. Pedal amps are effectively amp heads in pedal format, containing preamp and power amp circuits but not speakers.
Pedal amps became popular in the 2020s as amplification technology continued to shrink in size, since they proved ideal options for a small, portable rig or for use as an emergency backup for a conventional amplifier. Pedal amps generally use solid-state technology but some models include tube preamps in a hybrid approach.
Digital modelers often come in pedal amp format, but lack power amp functionality. In such cases, preamp-only pedal amps typically include speaker emulation to mimic the sound of a full amplifier setup and send it to a powered speaker, PA system, or recording system.
See also
Vintage musical equipment Tube sound Bass amplifier
Further reading
Fliegler, Ritchie. The Complete Guide to Guitar and Amp Maintenance. Hal Leonard Corporation, 1994.
Fliegler, Ritchie and Eiche, Jon F. Amps!: The Other Half of Rock 'n' Roll. Hal Leonard Corporation, 1993. Hunter, Dave.
Amped: The Illustrated History of the World's Greatest Amplifiers. Voyageur Press, 2012. Pittman, Aspen.
The Tube Amp Book. Backbeat, 2003. Tarquin, Brian.
Guitar Amplifier Encyclopedia. Skyhorse Publishing, Inc., 2016. Weber, Gerald, "A Desktop Reference of Hip Vintage Guitar Amps", Hal Leonard Corporation, 1994.
External links
Lenard Audio History of Guitar Amplifiers (non-profit educational website) Vintage Guitar magazine article on vintage amps
Text derived from https://en.wikipedia.org/w/index.php?oldid=1377832619 under CC BY-SA 4.0; modifications have been made.
References
- ↩Wikipedia “Guitar amplifier” release date (×1) · confidence 0.95 revision URL