Haber process
≈ 9 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
, 1918 The Haber process, also called the Haber–Bosch process, is the main industrial procedure for the production of ammonia. It converts atmospheric nitrogen (N 2 ) to ammonia (NH 3 ) by a reaction with hydrogen (H 2 ) using finely divided iron metal as a catalyst: \ce{N2 + 3H2 2NH3} \qquad {\Delta H^\circ_\mathrm{298~K} = -92.28~\text{kJ per mole of }\ce{N2}} This reaction is exothermic but disfavored in terms of entropy because four equivalents of reactant gases are converted into two equivalents of product gas.
However, due to the extremely high kinetic barriers to bond cleavage, high pressures and temperatures are needed to drive the reaction forward. The Haber Process was first created by the German Chemist Fritz Haber, then developed after a few years by Carl Bosch.
The German chemists Fritz Haber and Carl Bosch developed the process in the first decade of the 20th century, and its improved efficiency over existing methods such as the Birkeland–Eyde and Frank–Caro processes was a major advancement in the industrial production of ammonia. The Haber process can be combined with steam reforming to produce ammonia with just three chemical inputs: water, natural gas, and atmospheric nitrogen.…
, 1918 The Haber process, also called the Haber–Bosch process, is the main industrial procedure for the production of ammonia. It converts atmospheric nitrogen (N 2 ) to ammonia (NH 3 ) by a reaction with hydrogen (H 2 ) using finely divided iron metal as a catalyst: \ce{N2 + 3H2 2NH3} \qquad {\Delta H^\circ_\mathrm{298~K} = -92.28~\text{kJ per mole of }\ce{N2}} This reaction is exothermic but disfavored in terms of entropy because four equivalents of reactant gases are converted into two equivalents of product gas.
However, due to the extremely high kinetic barriers to bond cleavage, high pressures and temperatures are needed to drive the reaction forward. The Haber Process was first created by the German Chemist Fritz Haber, then developed after a few years by Carl Bosch.
The German chemists Fritz Haber and Carl Bosch developed the process in the first decade of the 20th century, and its improved efficiency over existing methods such as the Birkeland–Eyde and Frank–Caro processes was a major advancement in the industrial production of ammonia. The Haber process can be combined with steam reforming to produce ammonia with just three chemical inputs: water, natural gas, and atmospheric nitrogen.
Both Haber and Bosch were eventually awarded the Nobel Prize in Chemistry: Haber in 1918 for ammonia synthesis specifically, and Bosch in 1931 for related contributions to high-pressure chemistry. K = \frac{y_\ce{NH3}^2}{y_\ce{H2}^3 y_\ce{N2}} \frac{\hat\phi_\ce{NH3}^2}{\hat\phi_\ce{H2}^3 \hat\phi_\ce{N2}} \left(\frac{P^\circ}{P}\right)^2, where \hat\phi_i is the fugacity coefficient of species i , y_i is the mole fraction of the same species, P is the reactor pressure, and P^\circ is standard pressure, typically .
Economically, reactor pressurization is expensive: pipes, valves, and reaction vessels need to be strong enough, and safety considerations affect operating at 20 MPa. Compressors take considerable energy, as work must be done on the (compressible) gas. Thus, the compromise used gives a single-pass yield of around 15%.
While removing the ammonia from the system increases the reaction yield, this step is not used in practice, since the temperature is too high; instead it is removed from the gases leaving the reaction vessel. The hot gases are cooled under high pressure, allowing the ammonia to condense and be removed as a liquid.
Unreacted hydrogen and nitrogen gases are returned to the reaction vessel for another round. While most ammonia is removed (typically down to 2–5 mol.%), some ammonia remains in the recycle stream. In academic literature, a more complete separation of ammonia has been proposed by absorption in metal halides, metal-organic frameworks or zeolites.
Such a process is called an absorbent-enhanced Haber process or adsorbent-enhanced Haber–Bosch process. \ce{N2 + 3H2 2NH3} \qquad {\Delta H^\circ_{\mathrm{298~K}} = -92.28 \; \ce{kJ/mol}}) The reaction is an exothermic equilibrium reaction in which the gas volume is reduced. The equilibrium constant K of the reaction (see table) and obtained from: K_{eq} = \frac{p^2 \ce{(NH3)}}{p \ce{(N2)}\cdot p^3 \ce{(H2)}} Since the reaction is exothermic, the equilibrium of the reaction shifts at lower temperatures to the ammonia side.
Furthermore, four volumetric units of the raw materials produce two volumetric units of ammonia. According to Le Chatelier's principle, higher pressure favours ammonia. High pressure is necessary to ensure sufficient surface coverage of the catalyst with nitrogen.
For this reason, a ratio of nitrogen to hydrogen of 1 to 3, a pressure of 250 to 350 bar, a temperature of 450 to 550 °C and α iron are optimal. The catalyst ferrite (α-Fe) is produced in the reactor by the reduction of magnetite with hydrogen.
The catalyst has its highest efficiency at temperatures of about 400 to 500 °C. Even though the catalyst greatly lowers the activation energy for the cleavage of the triple bond of the nitrogen molecule, high temperatures are still required for an appropriate reaction rate. At the industrially used reaction temperature of 450 to 550 °C an optimum between the decomposition of ammonia into the starting materials and the effectiveness of the catalyst is achieved.
The formed ammonia is continuously removed from the system. The volume fraction of ammonia in the gas mixture is about 20%. The inert components, especially the noble gases such as argon, should not exceed a certain content in order not to reduce the partial pressure of the reactants too much.
To remove the inert gas components, part of the gas is removed and the argon is separated in a gas separation plant. The extraction of pure argon from the circulating gas is carried out using the Linde process. \ce{ {CH4_{(g)} } + H2O_{(g)} -> {CO_{(g)} } + 3H2_{(g)} } \qquad {\Delta H^\circ = +206\ \ce{kJ/mol} } The methane gas reacts in the primary reformer only partially.
To increase the hydrogen yield and keep the content of inert components (i. e. methane) as low as possible, the remaining methane gas is converted in a second step with oxygen to hydrogen and carbon monoxide in the secondary reformer. The secondary reformer is supplied with air as the oxygen source.
Also, the required nitrogen for the subsequent ammonia synthesis is added to the gas mixture. \ce{ {2CH4_{(g)} } + O2_{(g)} -> {2CO_{(g)} } + 4H2_{(g)} } \qquad {\Delta H^\circ = -71\ \ce{kJ/mol} } In the third step, the carbon monoxide is oxidized to carbon dioxide, which is called CO conversion or water–gas shift reaction. \ce{ {CO_{(g)} } + H2O(g) -> {CO2_{(g)} } + H2_{(g)}} \qquad {\Delta H^\circ = -41\ \ce{kJ/mol} } Carbon monoxide and carbon dioxide would form carbamates with ammonia, which would clog (as solids) pipelines and apparatus within a short time. In the following process step, the carbon dioxide must therefore be removed from the gas mixture.
In contrast to carbon monoxide, carbon dioxide can easily be removed from the gas mixture by gas scrubbing with triethanolamine. The gas mixture then still contains methane and noble gases such as argon, which, however, behave inertly. The gas mixture is then compressed to operating pressure by turbo compressors.
The resulting compression heat is dissipated by heat exchangers; it is used to preheat raw gases. The actual production of ammonia takes place in the ammonia reactor. The first reactors were bursting under high pressure because the atomic hydrogen in the carbonaceous steel partially recombined into methane and produced cracks in the steel.
Bosch, therefore, developed tube reactors consisting of a pressure-bearing steel tube in which a low-carbon iron lining tube was inserted and filled with the catalyst. Hydrogen that diffused through the inner steel pipe escaped to the outside via thin holes in the outer steel jacket, the so-called Bosch holes.
A disadvantage of the tubular reactors was the relatively high-pressure loss, which had to be applied again by compression. The development of hydrogen-resistant chromium-molybdenum steels made it possible to construct single-walled pipes.
Modern ammonia reactors are designed as multi-storey reactors with a low-pressure drop, in which the catalysts are distributed as fills over about ten storeys one above the other. The gas mixture flows through them one after the other from top to bottom. Cold gas is injected from the side for cooling.
A disadvantage of this reactor type is the incomplete conversion of the cold gas mixture in the last catalyst bed. Alternatively, the reaction mixture between the catalyst layers is cooled using heat exchangers, whereby the hydrogen-nitrogen mixture is preheated to the reaction temperature. Reactors of this type have three catalyst beds.
In addition to good temperature control, this reactor type has the advantage of better conversion of the raw material gases compared to reactors with cold gas injection. Uhde has developed and is using an ammonia converter with three radial flow catalyst beds and two internal heat exchangers instead of axial flow catalyst beds. This further reduces the pressure drop in the converter.
The reaction product is continuously removed for maximum yield. The gas mixture is cooled to 450 °C in a heat exchanger using water, freshly supplied gases, and other process streams. The ammonia also condenses and is separated in a pressure separator.
Unreacted nitrogen and hydrogen are then compressed back to the process by a circulating gas compressor, supplemented with fresh gas, and fed to the reactor. In a subsequent distillation, the product ammonia is purified.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1378669235 under CC BY-SA 4.0; modifications have been made.