Half-band filter

A half-band filter is a finite impulse response (FIR) low-pass filter that reduces the maximum bandwidth of sampled data by a factor of 2 (one octave).

Uses your system voice; voice and rate in settings.

≈ 2 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A half-band filter is a finite impulse response (FIR) low-pass filter that reduces the maximum bandwidth of sampled data by a factor of 2 (one octave). When multiple octaves of reduction are needed, a cascade of half-band filters is common. And when the goal is downsampling, each half-band filter needs to compute only half as many output samples as input samples.

In digital signal processing, half-band filters are widely used for their efficiency in multi-rate applications. It follows from the filter's definition that its transition region, or skirt, can be centered at frequency   f_s/4,   where   f_s   is the input sample-rate.

That makes it possible to design a FIR filter whose every other coefficient is zero, and whose non-zero coefficients are symmetrical about the center of the impulse response. (See )  Both of those properties can be used to improve efficiency of the implementation.

Further reading

https://www.dsprelated.com/showarticle/1113.php

Text derived from https://en.wikipedia.org/w/index.php?oldid=1340356013 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001340356013 · captured 2026-02-25 · ledger · version history

Cite this page as: encyclopegia.org, “Half-band filter”, snapshot enwiki-001340356013. https://encyclopegia.org/a/half-band-filter

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.