Lesson plan

Half-speed mastering

Half-speed mastering is a technique occasionally used when cutting the acetate lacquers from which phonograph records are produced. The cutting machine platter is run at half of the usual speed (16 rpm for 33 rpm records) while the signal to be recorded is fed to the cutting head at half of its regular playback speed. The reasons for using this technique vary, but it is generally used for improving the high-frequency response of the finished record. By halving the speed during cutting, very high frequencies that are difficult to cut become much easier to cut since they are now mid-range frequencies. Mobile Fidelity Sound Lab used half-speed mastering for its Original Master Recording LPs.

Back to article

Article summary

Half-speed mastering is a technique occasionally used when cutting the acetate lacquers from which phonograph records are produced. The cutting machine platter is run at half of the usual speed (16 rpm for 33 rpm records) while the signal to be recorded is fed to the cutting head at half of its regular playback speed. The reasons for using this technique vary, but it is generally used for improving the high-frequency response of the finished record. By halving the speed during cutting, very high frequencies that are difficult to cut become much easier to cut since they are now mid-range frequencies. Mobile Fidelity Sound Lab used half-speed mastering for its Original Master Recording LPs.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.