Hall circles
≈ 3 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Hall circles (also known as M-circles and N-circles) are a graphical tool in control theory used to obtain values of a closed-loop transfer function from the Nyquist plot (or the Nichols plot) of the associated open-loop transfer function. Hall circles have been introduced in control theory by Albert C. Hall in his thesis.
Hall circles (also known as M-circles and N-circles) are a graphical tool in control theory used to obtain values of a closed-loop transfer function from the Nyquist plot (or the Nichols plot) of the associated open-loop transfer function. Hall circles have been introduced in control theory by Albert C. Hall in his thesis.
Consider a closed-loop linear control system with open-loop transfer function given by transfer function G(s) and with a unit gain in the feedback loop. The closed-loop transfer function is given by T(s) = \frac{G(s)}{1+G(s)} .
To check the stability of T(s), it is possible to use the Nyquist stability criterion with the Nyquist plot of the open-loop transfer function G(s). Note, however, that the Nyquist plot of G(s) does not give the actual values of T(s). To get this information from the G(s)-plane, Hall proposed to construct the locus of points in the G(s)-plane such that T(s) has constant magnitude and also the locus of points in the G(s)-plane such that T(s) has constant phase angle. Given a positive real value M representing a fixed magnitude, and denoting G(s) by z, the points satisfying M = |T(s)| = \frac = \frac are given by the points z in the G(s)-plane such that the ratio of the distance between z and 0 and the distance between z and -1 is equal to M. The points z satisfying this locus condition are circles of Apollonius, and this locus is known in the context of control systems as M-circles.
Given a positive real value N representing a phase angle, the points satisfying N = \arg \left[\frac{G(s)}{1+G(s)}\right] = \arg[G(s)] - \arg[1+G(s)] = \arg[z] - \arg[1+z] are given by the points z in the G(s)-plane such that the angle between -1 and z and the angle between 0 and z is constant. In other words, the angle opposed to the line segment between -1 and 0 must be constant.
This implies that the points z satisfying this locus condition are arcs of circles, and this locus is known in the context of control systems as N-circles.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1344181880 under CC BY-SA 4.0; modifications have been made.