Hall-effect thruster

Uses your system voice; voice and rate in settings.

Snapshot

≈ 10 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Jet Propulsion Laboratory In spacecraft propulsion, a Hall-effect thruster (HET, sometimes referred to as a Hall thruster or Hall-current thruster) is a type of ion thruster in which the propellant is accelerated by an electric field. Based on the discovery by Edwin Hall, Hall-effect thrusters use a magnetic field to limit the electrons' axial motion and then use them to ionize propellant, efficiently accelerate the ions to produce thrust, and neutralize the ions in the plume.

The Hall-effect thruster is classed as a moderate specific impulse (1,600 s) space propulsion technology and has benefited from considerable theoretical and experimental research since the 1960s. Hall thrusters operate on a variety of propellants, the most common being xenon and krypton. Other propellants of interest include argon, bismuth, iodine, magnesium, zinc and adamantane.

Hall thrusters are able to accelerate their exhaust to speeds between 10 and 80 km/s (1,000–8,000 s specific impulse), with most models operating between 15 and 30 km/s. The thrust produced depends on the power level. Devices operating at 1.35 kW produce about 83 mN of thrust. High-power models have demonstrated up to 5.4 N in the laboratory.

Power levels up to 100 kW have been demonstrated for xenon Hall thrusters.…

Jet Propulsion Laboratory In spacecraft propulsion, a Hall-effect thruster (HET, sometimes referred to as a Hall thruster or Hall-current thruster) is a type of ion thruster in which the propellant is accelerated by an electric field. Based on the discovery by Edwin Hall, Hall-effect thrusters use a magnetic field to limit the electrons' axial motion and then use them to ionize propellant, efficiently accelerate the ions to produce thrust, and neutralize the ions in the plume.

The Hall-effect thruster is classed as a moderate specific impulse (1,600 s) space propulsion technology and has benefited from considerable theoretical and experimental research since the 1960s. Hall thrusters operate on a variety of propellants, the most common being xenon and krypton. Other propellants of interest include argon, bismuth, iodine, magnesium, zinc and adamantane.

Hall thrusters are able to accelerate their exhaust to speeds between 10 and 80 km/s (1,000–8,000 s specific impulse), with most models operating between 15 and 30 km/s. The thrust produced depends on the power level. Devices operating at 1.35 kW produce about 83 mN of thrust. High-power models have demonstrated up to 5.4 N in the laboratory.

Power levels up to 100 kW have been demonstrated for xenon Hall thrusters. Hall-effect thrusters ranged in input power levels from 1.35 to 10 kilowatts and had exhaust velocities of 10–50 kilometers per second, with thrust of 40–600 millinewtons and efficiency in the range of 45–60 percent.

The applications of Hall-effect thrusters include control of the orientation and position of orbiting satellites and use as a main propulsion engine for medium-size robotic space vehicles. About 20–30% of the discharge current is an electron current, which does not produce thrust, thus limiting the energetic efficiency of the thruster; the other 70–80% of the current is in the ions.

Because the majority of electrons are trapped in the Hall current, they have a long residence time inside the thruster and are able to ionize almost all of the xenon propellant, allowing mass use of 90–99%. The mass use efficiency of the thruster is thus around 90%, while the discharge current efficiency is around 70%, for a combined thruster efficiency of around 63% (= 90% × 70%).

Modern Hall thrusters have achieved efficiencies as high as 75% through advanced designs. Compared to chemical rockets, the thrust is very small, on the order of 83 mN for a typical thruster operating at 300 V and 1.5 kW. For comparison, the weight of a coin like the U.S. quarter or a 20-cent euro coin is approximately 60 mN.

As with all forms of electrically powered spacecraft propulsion, thrust is limited by available power, efficiency, and specific impulse. However, Hall thrusters operate at the high specific impulses that are typical for electric propulsion.

One particular advantage of Hall thrusters, as compared to a gridded ion thruster, is that the generation and acceleration of the ions takes place in a quasi-neutral plasma, so there is no Child-Langmuir charge (space charge) saturated current limitation on the thrust density. This allows much smaller thrusters compared to gridded ion thrusters.

Another advantage is that these thrusters can use a wider variety of propellants supplied to the anode, even oxygen, although something easily ionized is needed at the cathode. \mathbf{F}=q(\mathbf{E}+\mathbf{v}\times\mathbf{B}) where q is the particle charge, \mathbf{E} is the electric field, \mathbf{v} is the particle velocity, and \mathbf{B} is the magnetic field. In a conventional annular Hall thruster, the dominant electric field is approximately axial and the magnetic field is approximately radial.

The crossed electric and magnetic fields cause magnetized electrons to undergo an azimuthal E-cross-B drift: \mathbf{v}_{E\times B}=\frac{\mathbf{E}\times\mathbf{B}}{B^2} This drift produces the circulating Hall current from which the thruster gets its name. The degree of electron magnetization is often characterized by the Hall parameter: \Omega_e=\frac{\omega_{ce}}{\nu_e} where \omega_{ce}=eB/m_e is the electron cyclotron frequency and \nu_e is an effective electron collision frequency.

Ions are accelerated primarily by the axial electric field. For an ion of mass m_i and charge state Z accelerated through an effective beam voltage V_b , energy conservation gives: \frac{1}{2}m_i v_i^2 = ZeV_b \implies v_i=\sqrt{\frac{2ZeV_b}{m_i}} The ideal thrust associated with the ion beam T \approx \dot{m}_i v_i , where \dot{m}_i is the ion mass flow rate.

In practice, the thrust is reduced by losses such as beam divergence, incomplete propellant utilization, multiply charged ions, wall losses, and electron current that reaches the anode without contributing to thrust.

Propellants

Hall thrusters commonly use noble-gas propellants because they are chemically inert, can be stored as compressed gases, and do not require vaporization before use. Xenon has traditionally been preferred because its high atomic mass and relatively low ionization energy reduce ionization losses and support efficient thrust production.

Lower-cost alternatives, including krypton and argon, have become attractive for large satellite constellations, where propellant price and supply can matter as much as peak thruster efficiency. Mercury has also been used experimentally, as it is heavier than xenon or krypton, cheap, and efficient to store in liquid form.

Xenon

Xenon has been the typical choice of propellant for many electric propulsion systems, including Hall thrusters. Xenon propellant is used because of its high atomic weight and low ionization potential. Xenon is relatively easy to store, and as a gas at spacecraft operating temperatures does not need to be vaporized before usage, unlike metallic propellants such as bismuth.

Xenon's high atomic weight means that the ratio of energy expended for ionization per mass unit is low, leading to a more efficient thruster.

Krypton

Krypton is another choice of propellant for Hall thrusters. Xenon has an ionization potential of 12.1298 eV, while krypton has an ionization potential of 13.996 eV. This means that thrusters utilizing krypton need to expend a slightly higher energy per mole to ionize, which reduces efficiency.

Additionally, krypton is a lighter ion, so the unit mass per ionization energy is further reduced compared to xenon. However, xenon can be more than ten times as expensive as krypton per kilogram, making krypton a more economical choice for building out satellite constellations like that of SpaceX's Starlink V1, whose original Hall thrusters used krypton.

Argon

SpaceX developed a new thruster that used argon as propellant for their Starlink V2 mini. The new thruster had 2.4 times the thrust and 1.5 times the specific impulse as SpaceX's previous thruster that used krypton. Argon is approximately 100 times less expensive than Krypton and 1000 times less expensive than Xenon.

Cylindrical Hall thrusters

Although conventional (annular) Hall thrusters are efficient in the kilowatt power regime, they become inefficient when scaled to small sizes. This is due to the difficulties associated with holding the performance scaling parameters constant while decreasing the channel size and increasing the applied magnetic field strength. This led to the design of the cylindrical Hall thruster.

The cylindrical Hall thruster can be more readily scaled to smaller sizes due to its nonconventional discharge-chamber geometry and associated magnetic field profile. The cylindrical Hall thruster more readily lends itself to miniaturization and low-power operation than a conventional (annular) Hall thruster.

The primary reason for cylindrical Hall thrusters is that it is difficult to achieve a regular Hall thruster that operates over a broad envelope from c.1 kW down to c. 100 W while maintaining an efficiency of 45–55%.

External discharge Hall thruster

Sputtering erosion of discharge channel walls and pole pieces that protect the magnetic circuit causes failure of thruster operation. Therefore, annular and cylindrical Hall thrusters have limited lifetime. Although magnetic shielding has been shown to dramatically reduce discharge channel wall erosion, pole piece erosion is still a concern.

As an alternative, an unconventional Hall thruster design called external discharge Hall thruster or external discharge plasma thruster (XPT) has been introduced. The external discharge Hall thruster does not possess any discharge channel walls or pole pieces.

Plasma discharge is produced and sustained completely in the open space outside the thruster structure, and thus erosion-free operation is achieved.

In development

The highest power Hall-effect thruster in development ( ) is the University of Michigan's 100 kW X3 Nested Channel Hall Thruster. The thruster is approximately 80 cm in diameter and weighs 230 kg, and has demonstrated a thrust of 5.4 N. Other high power thrusters include NASA's 40 kW Advanced Electric Propulsion System (AEPS), meant to propel large-scale science missions and cargo transportation in deep space.

Further reading

Edgar, Y. (2009). New Dawn for Electric Rockets

SITAEL S.p.A. (Italy) —Page presenting Hall effect thruster products & data sheets Electric Propulsion Sub-Systems (PDF) Stationary plasma thrusters (PDF) ESA page on Hall thrusters

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378498386 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

23 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.