Lesson plan
Handloading
cartridge. Top-to-bottom: Copper-jacketed bullet, smokeless powder granules, rimless brass case, Boxer primer. ted trays or "loading blocks" that hold empty cases awaiting handloading and completed cartridges (top right area) Handloading is the practice of making firearm cartridges by manually assembling the individual components (metallic/polymer case, primer, propellant and projectile), rather than purchasing mass-produced, factory-loaded commercial ammunition. Handloading using previously fired cartridge cases or shotshells is called reloading (should not be confused with the reloading of a firearm with cartridges, such as by swapping detachable magazines, or using a stripper clip or speedloader to quickly insert new cartridges into a magazine). While the root "loading" refers to the filling of muzzle loading firearms with propellant (originally with black gunpowder or less commonly smokeless powder) and a bullet, most of the actual handloading process involves the cartridge case and its preparation. Unlike the propellant, primer and projectile (bullets, shot and slugs), which are all single-use consumables, the case is the only reusable component and its shape, internal capacity and crimping tension are crucial factors influencing the internal ballistics of the cartridge.…
Article summary
cartridge. Top-to-bottom: Copper-jacketed bullet, smokeless powder granules, rimless brass case, Boxer primer. ted trays or "loading blocks" that hold empty cases awaiting handloading and completed cartridges (top right area) Handloading is the practice of making firearm cartridges by manually assembling the individual components (metallic/polymer case, primer, propellant and projectile), rather than purchasing mass-produced, factory-loaded commercial ammunition. Handloading using previously fired cartridge cases or shotshells is called reloading (should not be confused with the reloading of a firearm with cartridges, such as by swapping detachable magazines, or using a stripper clip or speedloader to quickly insert new cartridges into a magazine). While the root "loading" refers to the filling of muzzle loading firearms with propellant (originally with black gunpowder or less commonly smokeless powder) and a bullet, most of the actual handloading process involves the cartridge case and its preparation. Unlike the propellant, primer and projectile (bullets, shot and slugs), which are all single-use consumables, the case is the only reusable component and its shape, internal capacity and crimping tension are crucial factors influencing the internal ballistics of the cartridge.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.