Hard disk drive

Uses your system voice; voice and rate in settings.

Snapshot

≈ 21 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A hard disk drive (HDD), hard disk, hard drive, or fixed disk is an electro-mechanical computer data storage device that stores and retrieves digital data using magnetic storage with one or more rigid rapidly rotating platters coated with magnetic material. The platters are paired with magnetic heads, usually arranged on a moving actuator arm, which read and write data to the platter surfaces.

Data is accessed in a random-access manner, meaning that individual blocks of data can be stored and retrieved in any order. HDDs are a type of non-volatile storage, retaining stored data when powered off. Modern HDDs are typically in the form of a small rectangular box, possibly in a disk enclosure for portability.

Modern disks do not have removable media, in contrast to the disk drives common in the 1960s and 1970s which often used removable disk packs. IBM introduced the first disk drive, the 350 for the 305 RAMAC, in 1956, and disks were the dominant secondary storage device for general-purpose computers beginning in the early 1960s. HDDs maintained this position into the modern era of servers and personal computers, though personal computing devices produced in large volume, like mobile phones and tablets, rely on flash memory storage devices.…

A hard disk drive (HDD), hard disk, hard drive, or fixed disk is an electro-mechanical computer data storage device that stores and retrieves digital data using magnetic storage with one or more rigid rapidly rotating platters coated with magnetic material. The platters are paired with magnetic heads, usually arranged on a moving actuator arm, which read and write data to the platter surfaces.

Data is accessed in a random-access manner, meaning that individual blocks of data can be stored and retrieved in any order. HDDs are a type of non-volatile storage, retaining stored data when powered off. Modern HDDs are typically in the form of a small rectangular box, possibly in a disk enclosure for portability.

Modern disks do not have removable media, in contrast to the disk drives common in the 1960s and 1970s which often used removable disk packs. IBM introduced the first disk drive, the 350 for the 305 RAMAC, in 1956, and disks were the dominant secondary storage device for general-purpose computers beginning in the early 1960s. HDDs maintained this position into the modern era of servers and personal computers, though personal computing devices produced in large volume, like mobile phones and tablets, rely on flash memory storage devices.

More than 224 companies have produced HDDs historically, though after extensive industry consolidation, most units are manufactured by Seagate, Toshiba, and Western Digital. HDDs dominate the volume of storage produced (exabytes per year) for servers.

Though production is growing slowly (by exabytes shipped ), sales revenues and unit shipments are declining, because solid-state drives (SSDs) have higher data-transfer rates, higher areal storage density, somewhat better reliability, and much lower latency and access times. The revenues for SSDs, most of which use NAND flash memory, slightly exceeded those for HDDs in 2018.

Flash storage products had more than twice the revenue of hard disk drives . Though SSDs have four to nine times higher cost per bit, they are replacing HDDs in applications where speed, power consumption, small size, high capacity and durability are important. , the cost per bit of SSDs was falling, and the price premium over HDDs had narrowed.

The primary characteristics of an HDD are its capacity and performance. Capacity is specified in unit prefixes corresponding to powers of : a 1-terabyte (TB) drive has a capacity of gigabytes, where 1 gigabyte = 1 000 megabytes = 1 000 000 kilobytes (1 million) = 1 000 000 000 bytes (1 billion).

Typically, some of an HDD's capacity is unavailable to the user because it is used by the file system and the computer operating system, and possibly inbuilt redundancy for error correction and recovery. There can be confusion regarding storage capacity since capacities are stated in decimal gigabytes (powers of 1000) by HDD manufacturers, whereas the most commonly used operating systems report capacities in powers of 1024, which results in a smaller number than advertised.

Performance is specified as the time required to move the heads to a track or cylinder (average access time), the time it takes for the desired sector to move under the head (average latency, which is a function of the physical rotational speed in revolutions per minute), and finally, the speed at which the data is transmitted (data rate). The two most common form factors for modern HDDs are 3.5-inch, for desktop computers, and 2.5-inch, primarily for laptops and servers.

HDDs are connected to systems by standard interface cables such as SATA (Serial ATA), USB, SAS (Serial Attached SCSI), or PATA (Parallel ATA) cables. magneticMedia.svg|Magnetic cross section & frequency modulation encoded binary data HDD_Startup_and_Shutdown.webm|HDD with front cover removed to show its operation Aufnahme einzelner Magnetisierungen gespeicherter Bits auf einem Festplatten-Platter..jpg|Recording of single magnetisations of bits on a 200 MB HDD-platter (recording made visible using CMOS-MagView) Perpendicular Recording Diagram.svg|Longitudinal recording (standard) & perpendicular recording diagram File:Hard drive.svg|Diagram labeling the major components of a computer HDD File:Hard disk dismantled.jpg|An HDD with disks and motor hub removed, exposing copper-colored stator coils surrounding a bearing in the center of the spindle motor. The orange stripe along the side of the arm is a thin printed-circuit cable, the spindle bearing is in the center and the actuator is in the upper left.

File:Circuit board of a Samsung hard disk MP0402H.jpg|Printed circuit board of a 2.5-inch Samsung hard disk MP0402H. File:Kopftraeger WD2500JS-00MHB0.jpg|Head stack with an actuator coil on the left and read/write heads on the right File:HDD read-write head.jpg|Close-up of a single read–write head, showing the side facing the platter File:Hard drive underside (better angle and lighting).jpg|The circuit board of a Western Digital hard drive attached to its chassis File:Hard drive arm 2.jpg|The read/write arm

Error rates and handling

Modern drives make extensive use of error correction codes (ECCs), particularly Reed–Solomon error correction. These techniques store extra bits, determined by mathematical formulas, for each block of data; the extra bits allow many errors to be corrected invisibly.

The extra bits themselves take up space on the HDD, but allow higher recording densities to be employed without causing uncorrectable errors, resulting in much larger storage capacity. For example, a typical 1 TB hard disk with 512-byte sectors provides additional capacity of about 93 GB for the ECC data.

In the newest drives, , low-density parity-check codes (LDPC) were supplanting Reed–Solomon; LDPC codes enable performance close to the Shannon limit and thus provide the highest storage density available. Typical hard disk drives attempt to "remap" the data in a physical sector that is failing to a spare physical sector provided by the drive's "spare sector pool" (also called "reserve pool"), while relying on the ECC to recover stored data while the number of errors in a bad sector is still low enough.

The S.M.A.R.T (Self-Monitoring, Analysis and Reporting Technology) feature counts the total number of errors in the entire HDD fixed by ECC (although not on all hard drives as the related S.M.A.R.T attributes "Hardware ECC Recovered" and "Soft ECC Correction" are not consistently supported), and the total number of performed sector remappings, as the occurrence of many such errors may predict an HDD failure. The "No-ID Format", developed by IBM in the mid-1990s, contains information about which sectors are bad and where remapped sectors have been located.

Only a tiny fraction of the detected errors end up as not correctable. Examples of specified uncorrected bit read error rates include: 2013 specifications for enterprise SAS disk drives state the error rate to be one uncorrected bit read error in every 10 16 bits read, 2018 specifications for consumer SATA hard drives state the error rate to be one uncorrected bit read error in every 10 14 bits.

Within a given manufacturers model the uncorrected bit error rate is typically the same regardless of capacity of the drive. The worst type of errors are silent data corruptions which are errors undetected by the disk firmware or the host operating system; some of these errors may be caused by hard disk drive malfunctions while others originate elsewhere in the connection between the drive and the host.

Development

from 1956 through 2009 compared to Moore's law. By 2016, progress had slowed significantly below the extrapolated density trend. The rate of areal density advancement was similar to Moore's law (doubling every two years) through 2010: 60% per year during 1988–1996, 100% during 1996–2003 and 30% during 2003–2010.

Speaking in 1997, Gordon Moore called the increase "flabbergasting", while observing later that growth cannot continue forever. Price improvement decelerated to −12% per year during 2010–2017, as the growth of areal density slowed.

The rate of advancement for areal density slowed to 10% per year during 2010–2016, and there was difficulty in migrating from perpendicular recording to newer technologies. As bit cell size decreases, more data can be put onto a single drive platter.

In 2013, a production desktop 3 TB HDD (with four platters) would have had an areal density of about 500 Gbit/in 2 which would have amounted to a bit cell comprising about 18 magnetic grains (11 by 1.6 grains). Since the mid-2000s, areal density progress has been challenged by a superparamagnetic trilemma involving grain size, grain magnetic strength and ability of the head to write.

In order to maintain acceptable signal-to-noise, smaller grains are required; smaller grains may self-reverse (electrothermal instability) unless their magnetic strength is increased, but known write head materials are unable to generate a strong enough magnetic field sufficient to write the medium in the increasingly smaller space taken by grains. Magnetic storage technologies are being developed to address this trilemma, and compete with flash memory–based solid-state drives (SSDs).

In 2013, Seagate introduced shingled magnetic recording (SMR), intended as something of a "stopgap" technology between PMR and Seagate's intended successor heat-assisted magnetic recording (HAMR). SMR utilizes overlapping tracks for increased data density, at the cost of design complexity and lower data access speeds (particularly write speeds and random access 4k speeds).

By contrast, HGST (now part of Western Digital) focused on developing ways to seal helium-filled drives instead of the usual filtered air. Since turbulence and friction are reduced, higher areal densities can be achieved due to using a smaller track width, and the energy dissipated due to friction is lower as well, resulting in a lower power draw.

Furthermore, more platters can be fit into the same enclosure space, although helium gas is notoriously difficult to prevent escaping. Thus, helium drives are completely sealed and do not have a breather port, unlike their air-filled counterparts. They have two top covers, the second is laser welded in place and is the only one visible from the exterior.

Other recording technologies are either under research or have been commercially implemented to increase areal density, including Seagate's heat-assisted magnetic recording (HAMR). HAMR requires a different architecture with redesigned media and read/write heads, new lasers, and new near-field optical transducers.

HAMR shipped commercially in early 2024 after technical issues delayed its introduction by more than a decade, from earlier projections as early as 2009. HAMR's planned successor, bit-patterned recording (BPR), has been removed from the roadmaps of Western Digital and Seagate.

Western Digital's microwave-assisted magnetic recording (MAMR), also referred to as energy-assisted magnetic recording (EAMR), was sampled in 2020, with the first EAMR drive, the Ultrastar HC550, shipping in late 2020. Two-dimensional magnetic recording (TDMR) and "current perpendicular to plane" giant magnetoresistance (CPP/GMR) heads have appeared in research papers.

Some drives have adopted dual independent actuator arms to increase read/write speeds and compete with SSDs. A 3D-actuated vacuum drive (3DHD) concept and 3D magnetic recording have been proposed. Depending upon assumptions on feasibility and timing of these technologies, Seagate forecasts that areal density will grow 20% per year during 2020–2034.

By the 1970s, the total capacity of HDDs was given by manufacturers using SI decimal prefixes such as megabytes (1 MB = 1,000,000 bytes), gigabytes (1 GB = 1,000,000,000 bytes) and terabytes (1 TB = 1,000,000,000,000 bytes). However, capacities of memory are usually quoted using a binary interpretation of the prefixes, i.e. using powers of 1024 instead of 1000.

Software reports hard disk drive or memory capacity in different forms using either decimal or binary prefixes. The Microsoft Windows family of operating systems uses the binary convention when reporting storage capacity, so an HDD offered by its manufacturer as a 1 TB drive is reported by these operating systems as a 931 GB HDD.

Mac OS X 10.6 ("Snow Leopard") uses decimal convention when reporting HDD capacity. The default behavior of the command-line utility on Linux is to report the HDD capacity as a number of 1024-byte units. The difference between the decimal and binary prefix interpretation caused some consumer confusion and led to class action suits against HDD manufacturers.

The plaintiffs argued that the use of decimal prefixes effectively misled consumers, while the defendants denied any wrongdoing or liability, asserting that their marketing and advertising complied in all respects with the law and that no class member sustained any damages or injuries. In 2020, a California court ruled that use of the decimal prefixes with a decimal meaning was not misleading.

Form factors

IBM's first hard disk drive, the IBM 350, used a stack of fifty 24-inch platters, stored 3.75 MB of data (approximately the size of one modern digital picture), and was of a size comparable to two large refrigerators. In 1962, IBM introduced its model 1311 disk, which used six 14-inch (nominal size) platters in a removable pack and was roughly the size of a washing machine.

This became a standard platter size for many years, used also by other manufacturers. The IBM 2314 used platters of the same size in an eleven-high pack and introduced the "drive in a drawer" layout, sometimes called the "pizza oven", although the "drawer" was not the complete drive.

Into the 1970s, HDDs were offered in standalone cabinets of varying dimensions containing from one to four HDDs. Beginning in the late 1960s, drives were offered that fit entirely into a chassis that would mount in a 19-inch rack.

Digital's RK05 and RL01 were early examples using single 14-inch platters in removable packs, the entire drive fitting in a 10.5-inch-high rack space (six rack units). In the mid-to-late 1980s, the similarly sized Fujitsu Eagle, which used (coincidentally) 10.5-inch platters, was a popular product.

With increasing sales of microcomputers having built-in floppy-disk drives (FDDs), HDDs that would fit to the FDD mountings became desirable. Starting with the Shugart Associates SA1000, HDD form factors initially followed those of 8-inch, -inch, and -inch floppy disk drives.

Although referred to by these nominal sizes, the actual sizes for those three drives respectively are 9.5", 5.75" and 4" wide. Because there were no smaller floppy disk drives, smaller HDD form factors such as -inch drives (actually 2.75" wide) developed from product offerings or industry standards. , -inch and -inch hard disks are the most popular sizes.

By 2009, all manufacturers had discontinued the development of new products for the 1.3-inch, 1-inch and 0.85-inch form factors due to falling prices of flash memory, which has no moving parts. While nominal sizes are in inches, actual dimensions are specified in millimeters.

Consumer hard drives are commonly sold pre-packaged in disk enclosures, which protect the device and allow attaching them via common general purpose interfaces like USB, allowing the device to remain separate from any computer using it and to be portable. Such enclosures vary widely in size as they are usually not intended to be inserted into a system as a fixed component.

Enclosures may also contain multiple hard drives combined as RAID. File:Hard disk head.jpg|Close-up of an HDD head resting on a disk platter; its mirror reflection is visible on the platter surface. Unless the head is on a landing zone, the heads touching the platters while in operation can be catastrophic.

File:Hard disk head crash.jpg|HDD head crash File:Broken HDD head (kaputt).jpg|Even worse crash File:Toshiba MK1403MAV - broken glass platter-93375.jpg|Destroyed hard disk, glass platter visible

Desktop HDDs

Desktop HDDs typically have one to five internal platters, rotate at 5,400 to 10,000 rpm, and have a media transfer rate of or higher (1 GB = 10 9 bytes; = ). Earlier (1980–1990s) drives tend to be slower in rotation speed. , the highest-capacity desktop HDDs stored 36TB, with plans to release 50 TB drives later in 20251.

36 TB HDDs were released in 2025. . , the typical speed of a hard drive in an average desktop computer is 7,200 rpm, whereas low-cost desktop computers may use 5,900 rpm or 5,400 rpm drives. For some time in the 2000s and early 2010s some desktop users and data centers also used 10,000 rpm drives such as Western Digital Raptor but such drives have become much rarer (since the WD VelociRaptor was discontinued) and are not commonly used now, having been replaced by NAND flash-based SSDs.

Mobile (laptop) HDDs

Smaller than their desktop and enterprise counterparts, they tend to be slower and have lower capacity, because typically has one internal platter and were 2.5" or 1.8" physical size instead of more common for desktops 3.5" form-factor. Mobile HDDs spin at 4,200 rpm, 5,200 rpm, 5,400 rpm, or 7,200 rpm, with 5,400 rpm being the most common; 7,200 rpm drives tend to be more expensive and have smaller capacities, while 4,200 rpm models usually were in older laptops and portables but are now outdated.

Because of smaller platter(s), mobile HDDs generally have lower capacity than their desktop counterparts.

Consumer electronics HDDs

These drives typically spin at 5400 rpm and include: Video hard drives, sometimes called "surveillance hard drives", are embedded into digital video recorders and provide a guaranteed streaming capacity, even in the face of read and write errors. Drives embedded into automotive vehicles; they are typically built to resist larger amounts of shock and operate over a larger temperature range.

External and portable HDDs

Current external hard disk drives typically connect via USB-C; earlier models use USB-B (sometimes with using of a pair of ports for better bandwidth) or (rarely) eSATA connection. Variants using USB 2.0 interface generally have slower data transfer rates when compared to internally mounted hard drives connected through SATA.

Plug and play drive functionality offers system compatibility and features large storage options and portable design. , available capacities for external hard disk drives ranged from 500 GB to 10 TB. External hard disk drives are usually available as assembled integrated products, but may be also assembled by combining an external enclosure (with USB or other interface) with a separately purchased drive.

They are available in 2.5-inch and 3.5-inch sizes; 2.5-inch variants are typically called portable external drives, while 3.5-inch variants are referred to as desktop external drives. "Portable" drives are packaged in smaller and lighter enclosures than the "desktop" drives; additionally, "portable" drives use power provided by the USB connection, while "desktop" drives require external power bricks.

Features such as encryption, Wi-Fi connectivity, biometric security or multiple interfaces (for example, FireWire) are available at a higher cost. There are pre-assembled external hard disk drives that, when taken out from their enclosures, cannot be used internally in a laptop or desktop computer due to embedded USB interface on their printed circuit boards, and lack of SATA (or Parallel ATA) interfaces.

File:WD External Hard Drives IMG 7899.jpg|Two 2.5" external USB hard drives File:ST3400820AS.jpg|Seagate Hard Drive with a controller board to convert SATA to USB, FireWire, and eSATA

Enterprise and business segment

Server and workstation HDDs HDD enclosure Typically used with multiple-user computers running enterprise software. Examples are: transaction processing databases, internet infrastructure (email, webserver, e-commerce), scientific computing software, and nearline storage management software.

Enterprise drives commonly operate continuously ("24/7") in demanding environments while delivering the highest possible performance without sacrificing reliability. Maximum capacity is not the primary goal, and as a result the drives are often offered in capacities that are relatively low in relation to their cost.

The fastest enterprise HDDs spin at 10,000 or 15,000 rpm, and can achieve sequential media transfer speeds above and a sustained transfer rate up to . Drives running at 10,000 or 15,000 rpm use smaller platters to mitigate increased power requirements (as they have less air drag) and therefore generally have lower capacity than the highest capacity desktop drives.

Enterprise HDDs are commonly connected through Serial Attached SCSI (SAS) or Fibre Channel (FC). Some support multiple ports, so they can be connected to a redundant host bus adapter. Enterprise HDDs can have sector sizes larger than 512 bytes (often 520, 524, 528 or 536 bytes).

The additional per-sector space can be used by hardware RAID controllers or applications for storing Data Integrity Field (DIF) or Data Integrity Extensions (DIX) data, resulting in higher reliability and prevention of silent data corruption. Surveillance hard drives; Video recording HDDs used in network video recorders.

Video showing an opened HD working Average seek time of a computer disk (archived) Timeline: 50 Years of Hard Drives. . HDD from inside: Tracks and Zones. How hard it can be?

Hard disk hacking firmware modifications, in eight parts, going as far as booting a Linux kernel on an ordinary HDD controller board Hiding Data in Hard Drive's Service Areas (PDF), February 14, 2013, by Ariel Berkman (archived) Rotary Acceleration Feed Forward (RAFF) Information Sheet (PDF), Western Digital, January 2013 PowerChoice Technology for Hard Disk Drive Power Savings and Flexibility (PDF), Seagate Technology, March 2010 Shingled Magnetic Recording (SMR), HGST, Inc., 2015 The Road to Helium, HGST, Inc., 2015 Research paper about perspective usage of magnetic photoconductors in magneto-optical data storage.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378786244 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “Hard disk drive” revision 1378786244 · retrieved 2026-10-20 release date (×1) · confidence 0.95 revision URL