Lesson plan
Hardmask
A hardmask is a material used in semiconductor processing as an etch mask instead of a polymer or other organic "soft" resist material. Hardmasks are necessary when the material being etched is itself an organic polymer. Anything used to etch this material will also etch the photoresist being used to define its patterning since that is also an organic polymer. This arises, for instance, in the patterning of low-κ dielectric insulation layers used in VLSI fabrication. Polymers tend to be etched easily by oxygen, fluorine, chlorine and other reactive gases used in plasma etching. Use of a hardmask involves an additional deposition process, and hence additional cost. First, the hardmask material is deposited and etched into the required pattern using a standard photoresist process. Following that the underlying material can be etched through the hardmask. Finally the hardmask is removed with a further etching process. Hardmask materials can be metal or dielectric. Silicon based masks such as silicon dioxide or silicon carbide are usually used for etching low-κ dielectrics. However, SiOCH (carbon doped hydrogenated silicon oxide), a material used to insulate copper interconnects, requires an etchant that attacks silicon compounds. For this material, metal or amorphous carbon hardmasks are used.…
Article summary
A hardmask is a material used in semiconductor processing as an etch mask instead of a polymer or other organic "soft" resist material. Hardmasks are necessary when the material being etched is itself an organic polymer. Anything used to etch this material will also etch the photoresist being used to define its patterning since that is also an organic polymer. This arises, for instance, in the patterning of low-κ dielectric insulation layers used in VLSI fabrication. Polymers tend to be etched easily by oxygen, fluorine, chlorine and other reactive gases used in plasma etching. Use of a hardmask involves an additional deposition process, and hence additional cost. First, the hardmask material is deposited and etched into the required pattern using a standard photoresist process. Following that the underlying material can be etched through the hardmask. Finally the hardmask is removed with a further etching process. Hardmask materials can be metal or dielectric. Silicon based masks such as silicon dioxide or silicon carbide are usually used for etching low-κ dielectrics. However, SiOCH (carbon doped hydrogenated silicon oxide), a material used to insulate copper interconnects, requires an etchant that attacks silicon compounds. For this material, metal or amorphous carbon hardmasks are used.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.