Lesson plan

hardware register

In digital electronics, a register is a group of memory cells that stores a collection of bits and continuously outputs the stored data. It typically consists of a synchronized group of flip-flops in which each flip-flop stores and outputs one bit of the collection. The number of bits a register can store, known as its word size, is equal to the number of flip-flops it contains. It is volatile memory, meaning that the circuit will cease to retain its stored data upon loss of operating power. Registers are characterized in various ways, including by bit storage capacity (e.g., 32-bit register), signal polarities, logic level and power supply voltages, and timing parameters. Registers are a fundamental building block of digital systems. They are used in a diverse range of applications, including in central processing units (CPUs) for a variety of purposes; in digital counters and other state machines; in serial and parallel communication; and in device interfaces for functions such as control and configuration, status reporting, and data buffering.

Back to article

Article summary

In digital electronics, a register is a group of memory cells that stores a collection of bits and continuously outputs the stored data. It typically consists of a synchronized group of flip-flops in which each flip-flop stores and outputs one bit of the collection. The number of bits a register can store, known as its word size, is equal to the number of flip-flops it contains. It is volatile memory, meaning that the circuit will cease to retain its stored data upon loss of operating power. Registers are characterized in various ways, including by bit storage capacity (e.g., 32-bit register), signal polarities, logic level and power supply voltages, and timing parameters. Registers are a fundamental building block of digital systems. They are used in a diverse range of applications, including in central processing units (CPUs) for a variety of purposes; in digital counters and other state machines; in serial and parallel communication; and in device interfaces for functions such as control and configuration, status reporting, and data buffering.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.