Heat engine
A heat engine is a system that transfers thermal energy to do mechanical or electrical work.
≈ 7 min read
Heat engine. encyclopegia.org, snapshot enwiki-001371080355. /a/heat-engine
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A heat engine is a system that transfers thermal energy to do mechanical or electrical work. While originally conceived in the context of mechanical energy, the concept of the heat engine has been applied to various other kinds of energy, particularly electrical, since at least the late 19th century.
The heat engine does this by bringing a working substance from a higher state temperature to a lower state temperature. A heat source supplies thermal energy that brings the working substance to the higher temperature state. The working substance does work in the working body of the engine while transferring heat to the colder sink until it reaches a lower temperature state.
During this process some of the thermal energy is converted into work by exploiting the properties of the working substance. The working substance can be any system with a non-zero heat capacity, but it usually is a gas or liquid. During this process, some heat is normally lost to the surroundings and is not converted to work.
Also, in a mechanical engine, some energy is unusable because of friction and drag. In general, an engine is any machine that converts energy to mechanical work. Heat engines distinguish themselves from other types of engines by the fact that their efficiency is fundamentally limited by Carnot's theorem of thermodynamics.
Although this efficiency limitation can be a drawback, an advantage of heat engines is that most forms of energy can be easily converted to heat by processes like exothermic reactions (such as combustion), nuclear fission, absorption of light or energetic particles, friction, dissipation and resistance. Since the heat source that supplies thermal energy to the engine can thus be powered by virtually any kind of energy, heat engines cover a wide range of applications.
Heat engines are often confused with the cycles they attempt to implement. Typically, the term "engine" is used for a physical device and "cycle" for the models; thus, for example, a diesel engine is a machine which implements the Diesel cycle. W + Q = \Delta_{cycle}U = 0 and therefore W = -Q = - (Q_c + Q_h) where W = -\oint PdV is the net work extracted from the engine in one cycle.
(It is negative, in the IUPAC convention, since work is done by the engine.) Q_h > 0 is the heat energy taken from the high temperature heat source in the surroundings in one cycle. (It is positive since heat energy is added to the engine.)
Q_c = -|Q_c| is the waste heat given off by the engine to the cold temperature heat sink. (It is negative since heat is lost by the engine to the sink.) In other words, a heat engine absorbs heat energy from the high temperature heat source, converting part of it to useful work and giving off the rest as waste heat to the cold temperature heat sink.
In general, the efficiency of a given heat transfer process is defined by the ratio of "what is taken out" to "what is put in". (For a refrigerator or heat pump, which can be considered as a heat engine run in reverse, this is the coefficient of performance and it is ≥ 1.)
In the case of an engine, one desires to extract work and has to put in heat Q_h , for instance from combustion of a fuel, so the engine efficiency is reasonably defined as \eta = \frac {Q_h} = \frac{Q_h + Q_c}{Q_h} = 1 + \frac{Q_c}{Q_h} = 1 - \frac {Q_h} The efficiency is less than 100% because of the waste heat Q_c unavoidably lost to the cold sink (and corresponding compression work put in) during the required recompression at the cold temperature before the power stroke of the engine can occur again. The theoretical maximum efficiency of any heat engine depends only on the temperatures it operates between.
This efficiency is usually derived using an ideal imaginary heat engine such as the Carnot heat engine, although other engines using different cycles can also attain maximum efficiency. Mathematically, after a full cycle, the overall change of entropy is zero: \ \ \ \Delta S_h + \Delta S_c = \Delta_{cycle} S = 0 Note that \Delta S_h is positive because isothermal expansion in the power stroke increases the multiplicity of the working fluid while \Delta S_c is negative since recompression decreases the multiplicity.
If the engine is ideal and runs reversibly, Q_h = T_h\Delta S_h and Q_c = T_c\Delta S_c , and thus Q_h / T_h + Q_c / T_c = 0 , which gives Q_c /Q_h = -T_c / T_h and thus the Carnot limit for heat-engine efficiency, \eta_\text{max} = 1 - \frac{T_c}{T_h} where T_h is the absolute temperature of the hot source and T_c that of the cold sink, usually measured in kelvins. The reasoning behind this being the maximal efficiency goes as follows.
It is first assumed that if a more efficient heat engine than a Carnot engine is possible, then it could be driven in reverse as a heat pump. Mathematical analysis can be used to show that this assumed combination would result in a net decrease in entropy.
Since, by the second law of thermodynamics, this is statistically improbable to the point of exclusion, the Carnot efficiency is a theoretical upper bound on the reliable efficiency of any thermodynamic cycle. Empirically, no heat engine has ever been shown to run at a greater efficiency than a Carnot cycle heat engine.
Figure 2 and Figure 3 show variations on Carnot cycle efficiency with temperature. Figure 2 indicates how efficiency changes with an increase in the heat addition temperature for a constant compressor inlet temperature. Figure 3 indicates how the efficiency changes with an increase in the heat rejection temperature for a constant turbine inlet temperature.
A different measure of ideal heat-engine efficiency is given by considerations of endoreversible thermodynamics, where the system is broken into reversible subsystems, but with non reversible interactions between them. A classical example is the Curzon–Ahlborn engine, very similar to a Carnot engine, but where the thermal reservoirs at temperature T_h and T_c are allowed to be different from the temperatures of the substance going through the reversible Carnot cycle: T'_h and T'_c .
The heat transfers between the reservoirs and the substance are considered as conductive (and irreversible) in the form dQ_{h,c}/dt = \alpha (T_{h,c}-T'_{h,c}) . In this case, a tradeoff has to be made between power output and efficiency.
If the engine is operated very slowly, the heat flux is low, T\approx T' and the classical Carnot result is found \eta = 1 - \frac{T_c}{T_h}, but at the price of a vanishing power output. If instead one chooses to operate the engine at its maximum output power, the efficiency becomes \eta = 1 - \sqrt{\frac{T_c}{T_h}} (Note: T must be specified in absolute units of temperature such as K or °R.) This model does a better job of predicting how well real-world heat-engines can do (Callen 1985, see also endoreversible thermodynamics): As shown, the Curzon–Ahlborn efficiency much more closely models that observed.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1371080355 under CC BY-SA 4.0; modifications have been made.